Re: [U-Boot] [PATCH] travis-ci: Switch to building QEMU

Am 07.12.2016 um 17:20 schrieb Tom Rini:

First, there are a number of features in newer QEMU that will allow us to test a wider range of platforms, so we want to use at least v2.8.0. Second, making use of a PPA for QEMU fails from time to time. So we change to checking out and building a copy of QEMU when we know that we are going to use test.py and need QEMU to be installed. This adds around 4 minutes per test.py job that we run.

Signed-off-by: Tom Rini trini@konsulko.com

.travis.yml | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/.travis.yml b/.travis.yml index 79bc24263abd..31fe27467184 100644 --- a/.travis.yml +++ b/.travis.yml @@ -10,8 +10,6 @@ language: c

addons: apt:

• sources:
• • sourceline: 'ppa:gns3/qemu'
  packages:
  • cppcheck
  • sloccount

@@ -21,10 +19,6 @@ addons: - libsdl1.2-dev - python - python-virtualenv

• • qemu-system-arm
• • qemu-system-mips
• • qemu-system-ppc
• • qemu-system-x86
  • gcc-powerpc-linux-gnu
  • gcc-arm-linux-gnueabihf
  • gcc-aarch64-linux-gnu

@@ -54,7 +48,7 @@ install:

env: global:

• • PATH=/tmp/dtc:/tmp/uboot-test-hooks/bin:$PATH

• • PATH=/tmp/dtc:/tmp/qemu-install/bin:/tmp/uboot-test-hooks/bin:$PATH
  • PYTHONPATH=/tmp/uboot-test-hooks/py/travis-ci
  • BUILD_DIR=build
  • HOSTCC="cc"

@@ -74,6 +68,15 @@ before_script: echo -e "\n[toolchain-prefix]\nx86 = ${HOME}/.buildman-toolchains/gcc-4.9.0-nolibc/x86_64-linux/bin/x86_64-linux-" >> ~/.buildman; fi

• if [[ "${TOOLCHAIN}" == *xtensa* ]]; then ./tools/buildman/buildman --fetch-arch xtensa ; fi

• • if [[ "${QEMU_TARGET}" != "" ]]; then

•   git clone git://git.qemu.org/qemu.git /tmp/qemu;
  

•   pushd /tmp/qemu;
  

•   git submodule update --init dtc &&
  

•   git checkout v2.8.0-rc3 &&
  

you could speed up git clone:

git clone --depth 1 --single-branch --branch v2.8.0-rc3 git://git.qemu.org/qemu.git /tmp/qemu pushd /tmp/qemu git submodule update --init --recommend-shallow --reference /tmp/dtc dtc

Because we already cloned dtc in the install steps, we could use it as reference repository.

BTW: you should consider adding "--single-branch --branch master" to the other clone tasks too.

•   ./configure --prefix=/tmp/qemu-install --target-list=${QEMU_TARGET} &&
  

•   make -j4 all install;
  

•   popd;
  

• fi

script: # Comments must be outside the command strings below, or the Travis parser @@ -140,43 +143,52 @@ matrix: - env: - TEST_PY_BD="vexpress_ca15_tc2" TEST_PY_ID="--id qemu"

•      QEMU_TARGET="arm-softmmu"
       BUILDMAN="^vexpress_ca15_tc2$"
  

  • env:
    • TEST_PY_BD="vexpress_ca9x4" TEST_PY_ID="--id qemu"

•      QEMU_TARGET="arm-softmmu"
       BUILDMAN="^vexpress_ca9x4$"
  

  • env:
    • TEST_PY_BD="integratorcp_cm926ejs" TEST_PY_TEST_SPEC="not sleep" TEST_PY_ID="--id qemu"

•      QEMU_TARGET="arm-softmmu"
       BUILDMAN="^integratorcp_cm926ejs$"
  

  • env:
    • TEST_PY_BD="qemu_mips" TEST_PY_TEST_SPEC="not sleep"

•      QEMU_TARGET="mips-softmmu"
       BUILDMAN="^qemu_mips$"
       TOOLCHAIN="mips"
  

  • env:
    • TEST_PY_BD="qemu_mipsel" TEST_PY_TEST_SPEC="not sleep"

•      QEMU_TARGET="mipsel-softmmu"
       BUILDMAN="^qemu_mipsel$"
       TOOLCHAIN="mips"
  

  • env:
    • TEST_PY_BD="qemu_mips64" TEST_PY_TEST_SPEC="not sleep"

•      QEMU_TARGET="mips64-softmmu"
       BUILDMAN="^qemu_mips64$"
       TOOLCHAIN="mips"
  

  • env:
    • TEST_PY_BD="qemu_mips64el" TEST_PY_TEST_SPEC="not sleep"

•      QEMU_TARGET="mips64el-softmmu"
       BUILDMAN="^qemu_mips64el$"
       TOOLCHAIN="mips"
  

  • env:
    • TEST_PY_BD="qemu-ppce500" TEST_PY_TEST_SPEC="not sleep"

•      QEMU_TARGET="ppc-softmmu"
       BUILDMAN="^qemu-ppce500$"
  

  • env:
    • TEST_PY_BD="qemu-x86" TEST_PY_TEST_SPEC="not sleep"

•      QEMU_TARGET="i386-softmmu"
       BUILDMAN="^qemu-x86$"
       TOOLCHAIN="x86_64"
       BUILD_ROM="yes"