This commit adds the default configuration file and relevant description for a MK808 board.
Signed-off-by: Johan Jonker jbx6244@gmail.com Reviewed-by: Kever Yang kever.yang@rock-chips.com ---
changed V9: enable led gpio disable STIMER
Changed V8: use default log level ENV_IS_NOWHERE --- configs/mk808_defconfig | 100 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 100 insertions(+) create mode 100644 configs/mk808_defconfig
diff --git a/configs/mk808_defconfig b/configs/mk808_defconfig new file mode 100644 index 0000000000..b475e73540 --- /dev/null +++ b/configs/mk808_defconfig @@ -0,0 +1,100 @@ +CONFIG_ARM=y +# CONFIG_SPL_SYS_THUMB_BUILD is not set +# CONFIG_TPL_SYS_THUMB_BUILD is not set +# CONFIG_SPL_USE_ARCH_MEMCPY is not set +# CONFIG_SPL_USE_ARCH_MEMSET is not set +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SYS_TEXT_BASE=0x60408000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x8000 +CONFIG_DEFAULT_DEVICE_TREE="rk3066a-mk808" +CONFIG_SPL_TEXT_BASE=0x60000000 +CONFIG_ROCKCHIP_RK3066=y +# CONFIG_ROCKCHIP_STIMER is not set +CONFIG_TPL_TEXT_BASE=0x10080C04 +CONFIG_TPL_MAX_SIZE=32764 +CONFIG_TPL_STACK=0x1008FFFF +CONFIG_TARGET_MK808=y +CONFIG_SPL_STACK_R_ADDR=0x70000000 +CONFIG_DEBUG_UART_BASE=0x20064000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SPL_FS_FAT=y +CONFIG_SYS_LOAD_ADDR=0x70800800 +CONFIG_SPL_PAYLOAD="u-boot.bin" +CONFIG_DEBUG_UART=y +CONFIG_SD_BOOT=y +CONFIG_USE_PREBOOT=y +CONFIG_DEFAULT_FDT_FILE="rk3066a-mk808.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x200000 +CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SPL_FS_EXT4=y +CONFIG_SYS_MMCSD_FS_BOOT_PARTITION=2 +CONFIG_TPL_NEEDS_SEPARATE_STACK=y +# CONFIG_BOOTM_PLAN9 is not set +# CONFIG_BOOTM_RTEMS is not set +# CONFIG_BOOTM_VXWORKS is not set +CONFIG_CMD_GPT=y +CONFIG_CMD_MMC=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_REGULATOR=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_TPL_OF_CONTROL=y +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_OF_DTB_PROPS_REMOVE=y +CONFIG_SPL_OF_PLATDATA=y +CONFIG_TPL_OF_PLATDATA=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +# CONFIG_NET is not set +CONFIG_TPL_DM=y +# CONFIG_DM_WARN is not set +CONFIG_REGMAP=y +CONFIG_SPL_REGMAP=y +CONFIG_TPL_REGMAP=y +CONFIG_SYSCON=y +CONFIG_SPL_SYSCON=y +CONFIG_TPL_SYSCON=y +# CONFIG_SIMPLE_BUS is not set +# CONFIG_SPL_SIMPLE_BUS is not set +# CONFIG_TPL_BLK is not set +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_TPL_CLK=y +CONFIG_ROCKCHIP_GPIO=y +# CONFIG_SPL_DM_I2C is not set +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MMC_IO_VOLTAGE=y +CONFIG_SPL_MMC_IO_VOLTAGE=y +CONFIG_MMC_UHS_SUPPORT=y +CONFIG_SPL_MMC_UHS_SUPPORT=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_SF_DEFAULT_SPEED=20000000 +CONFIG_PINCTRL=y +CONFIG_DM_PMIC=y +# CONFIG_SPL_PMIC_CHILDREN is not set +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_RAM=y +CONFIG_SPL_RAM=y +CONFIG_TPL_RAM=y +CONFIG_DM_RESET=y +# CONFIG_REQUIRE_SERIAL_CONSOLE is not set +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_ROCKCHIP_SERIAL=y +CONFIG_SYSRESET=y +CONFIG_TIMER=y +CONFIG_SPL_TIMER=y +CONFIG_TPL_TIMER=y +CONFIG_DESIGNWARE_APB_TIMER=y +CONFIG_SPL_TINY_MEMSET=y +CONFIG_ERRNO_STR=y +# CONFIG_TPL_OF_LIBFDT is not set