Hai,
I am configuring the u-boot for mcf54452. I am having the u-boot code of mcf54455EVB. There is no configuration for SPI In the EVB. I have to configure the SPI with EEPROM In my target board. I am following the READ ME file. We have to define some macro to configure the SPI and EPROM. I made the modification .But it gives some error (a lots of undefined variables) what are related to SPI .I added the header file and done some modification ... I am continuing modification...we can solve this problem by changing a lot..
But the question is, is it necessary to do these much modification for configuring SPI and EEPROM in the EVB code.
I think it is not necessary.....because it is code of EVB.
So just some changes (macros) only enough to configuration for any board.
If anybody of u know to solve my problem. Plz reply me as soon as possible.
Regards,
Karthik
DISCLAIMER: -----------------------------------------------------------------------------------------------------------------------
The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any mail and attachments please check them for viruses and defect.
-----------------------------------------------------------------------------------------------------------------------