On Thu, 23 Dec 2021 at 14:35, Mark Kettenis kettenis@openbsd.org wrote:
These are necessary to make sure the power domains needed for the serial console are availble in the pre-relocation phase.
Signed-off-by: Mark Kettenis kettenis@openbsd.org
arch/arm/dts/t8103-j274-u-boot.dtsi | 1 + arch/arm/dts/t8103-j293-u-boot.dtsi | 1 + arch/arm/dts/t8103-j313-u-boot.dtsi | 1 + arch/arm/dts/t8103-j456-u-boot.dtsi | 1 + arch/arm/dts/t8103-j457-u-boot.dtsi | 1 + arch/arm/dts/t8103-u-boot.dtsi | 25 +++++++++++++++++++++++++ 6 files changed, 30 insertions(+) create mode 100644 arch/arm/dts/t8103-j274-u-boot.dtsi create mode 100644 arch/arm/dts/t8103-j293-u-boot.dtsi create mode 100644 arch/arm/dts/t8103-j313-u-boot.dtsi create mode 100644 arch/arm/dts/t8103-j456-u-boot.dtsi create mode 100644 arch/arm/dts/t8103-j457-u-boot.dtsi create mode 100644 arch/arm/dts/t8103-u-boot.dtsi
Reviewed-by: Simon Glass sjg@chromium.org
You should not need the empty files, not sure what is happening there.