On Sun, Aug 5, 2012 at 12:55 PM, Enric Balletbo i Serra eballetbo@gmail.com wrote:
The total RAM size of the IGEP-based boards is 512MiB not 1GiB, the LPDDR memory consist on two dies of 256MiB.
Signed-off-by: Enric Balletbo i Serra eballetbo@gmail.com
board/isee/igep0020/igep0020.c | 6 +++--- board/isee/igep0030/igep0030.c | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/board/isee/igep0020/igep0020.c b/board/isee/igep0020/igep0020.c index a4d099a..a8257a3 100644 --- a/board/isee/igep0020/igep0020.c +++ b/board/isee/igep0020/igep0020.c @@ -77,19 +77,19 @@ void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, { *mr = MICRON_V_MR_165; #ifdef CONFIG_BOOT_NAND
*mcfg = MICRON_V_MCFG_200(512 << 20);
*mcfg = MICRON_V_MCFG_200(256 << 20); *ctrla = MICRON_V_ACTIMA_200; *ctrlb = MICRON_V_ACTIMB_200; *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;#else if (get_cpu_family() == CPU_OMAP34XX) {
*mcfg = NUMONYX_V_MCFG_165(512 << 20);
*mcfg = NUMONYX_V_MCFG_165(256 << 20); *ctrla = NUMONYX_V_ACTIMA_165; *ctrlb = NUMONYX_V_ACTIMB_165; *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; } else {
*mcfg = NUMONYX_V_MCFG_200(512 << 20);
*mcfg = NUMONYX_V_MCFG_200(256 << 20); *ctrla = NUMONYX_V_ACTIMA_200; *ctrlb = NUMONYX_V_ACTIMB_200; *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;diff --git a/board/isee/igep0030/igep0030.c b/board/isee/igep0030/igep0030.c index 4f8b645..107cb7f 100644 --- a/board/isee/igep0030/igep0030.c +++ b/board/isee/igep0030/igep0030.c @@ -64,19 +64,19 @@ void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, { *mr = MICRON_V_MR_165; #ifdef CONFIG_BOOT_NAND
*mcfg = MICRON_V_MCFG_200(512 << 20);
*mcfg = MICRON_V_MCFG_200(256 << 20); *ctrla = MICRON_V_ACTIMA_200; *ctrlb = MICRON_V_ACTIMB_200; *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;#else if (get_cpu_family() == CPU_OMAP34XX) {
*mcfg = NUMONYX_V_MCFG_165(512 << 20);
*mcfg = NUMONYX_V_MCFG_165(256 << 20); *ctrla = NUMONYX_V_ACTIMA_165; *ctrlb = NUMONYX_V_ACTIMB_165; *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; } else {
*mcfg = NUMONYX_V_MCFG_200(512 << 20);
*mcfg = NUMONYX_V_MCFG_200(256 << 20); *ctrla = NUMONYX_V_ACTIMA_200; *ctrlb = NUMONYX_V_ACTIMB_200; *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;-- 1.7.9.5
Hi Enric,
I missed that on the original patch, thanks for fixing it.
Tested-by: Javier Martinez Canillas javier@dowhile0.org
Best regards, Javier