[PATCH v4 1/3] arm: mvebu: dts: sync DTS

20 May 2022

Update the uDPU DTS to the version that is pending upstream [1][2][3][4].
[1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220516124828.4...
[2] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220516124828.4...
[3] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220516124828.4...
[4] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220516124828.4...
Signed-off-by: Robert Marko robert.marko@sartura.hr
---
 arch/arm/dts/armada-3720-uDPU.dts | 23 ++++++++++-------------
 1 file changed, 10 insertions(+), 13 deletions(-)

diff --git a/arch/arm/dts/armada-3720-uDPU.dts b/arch/arm/dts/armada-3720-uDPU.dts
index 1f534c0c65..f21a855fc6 100644
--- a/arch/arm/dts/armada-3720-uDPU.dts
+++ b/arch/arm/dts/armada-3720-uDPU.dts
@@ -16,7 +16,7 @@
/ {
    model = "Methode uDPU Board";
-	compatible = "methode,udpu", "marvell,armada3720";
+	compatible = "methode,udpu", "marvell,armada3720", "marvell,armada3710";
chosen {
    	stdout-path = "serial0:115200n8";
@@ -28,35 +28,34 @@
    };
leds {
-		pinctrl-names = "default";
    	compatible = "gpio-leds";
-		power1 {
+		led-power1 {
    		label = "udpu:green:power";
    		gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
    	};
-		power2 {
+		led-power2 {
    		label = "udpu:red:power";
    		gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
    	};
-		network1 {
+		led-network1 {
    		label = "udpu:green:network";
    		gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
    	};
-		network2 {
+		led-network2 {
    		label = "udpu:red:network";
    		gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
    	};
-		alarm1 {
+		led-alarm1 {
    		label = "udpu:green:alarm";
    		gpios = <&gpionb 15 GPIO_ACTIVE_LOW>;
    	};
-		alarm2 {
+		led-alarm2 {
    		label = "udpu:red:alarm";
    		gpios = <&gpionb 16 GPIO_ACTIVE_LOW>;
    	};
@@ -99,7 +98,7 @@
    pinctrl-names = "default";
    pinctrl-0 = <&spi_quad_pins>;
-	spi-flash@0 {
+	flash@0 {
    	compatible = "jedec,spi-nor";
    	reg = <0>;
    	spi-max-frequency = <54000000>;
@@ -153,14 +152,12 @@
    scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
    sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	nct375@48 {
-		status = "okay";
+	temp-sensor@48 {
    	compatible = "ti,tmp75c";
    	reg = <0x48>;
    };
-	nct375@49 {
-		status = "okay";
+	temp-sensor@49 {
    	compatible = "ti,tmp75c";
    	reg = <0x49>;
    };
-- 
2.36.1


    