Re: [U-Boot] [U-Boot, v2] spl: Change debug to printf for "Unsupported boot-device"

Hi Michal,

On 27.01.2015 14:43, Michal Simek wrote:

On Tue, Nov 11, 2014 at 07:03:55PM +0100, Stefan Roese wrote:

> We had the problem on an AM33xx platform, that SPL detected an
> unsupported boot-device. But since this message is a debug message
> it took a bit of time to really know, where the hangup in SPL
> resulted from. So let's change this debug message to a printf
> and also print the detected boot-device that is not supported.
> This makes debugging of such cases much easier.
>
> Signed-off-by: Stefan Roese <sr@denx.de <mailto:sr@denx.de>>
> Cc: Wolfgang Denk <wd@denx.de <mailto:wd@denx.de>>
> Cc: Tom Rini <trini@ti.com <mailto:trini@ti.com>>
 > Acked-by: Heiko Schocher <hs@denx.de <mailto:hs@denx.de>>

Applied to u-boot/master, thanks!

This patch is causing problem on Microblaze because SPL exceed 4k limit. It is only one printf which is called in entire SPL that's why this should be solved a little bit differently.

Ups. Yes, sorry. This one line definitely shouldn't cause all the printf stuff to be included. I'll try to address this quickly...

Thanks, Stefan