6 Feb
2004
6 Feb
'04
8:27 p.m.
In message 0e2d01c3ece1$baee9320$885c96c0@RIPSNORTERVM you wrote:
I'm porting (well, 90% done now) u-boot to a new board based on an OMAP processor. This board happens to have a DIP switch to select whether you boot from flash (strata) or ram. It does this by juggling CS0 and CS3 for the flash. This means that at run time, if you're running from
I understand this is just a debugging aid? Or how do you initialize RAM and load an U-Boot image into it if you're booting from RAM?
This is _not_ a nice thing to do without creating a lot of changes in the code :-/ I've dug about in the existing code (I'm working with the 1.0.0
Can you please explain first what you're trying to do? And why, or what for?
Best regards,
Wolfgang Denk
--
See us @ Embedded World, Nuremberg, Feb 17 - 19, Hall 12.0 Booth 440
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de
"He only drinks when he gets depressed." "Why does he get depressed?"
"Sometimes it's because he hasn't had a drink."
- Terry Pratchett, _Men at Arms_