Hi
2008/11/5 John Rigby jrigby@freescale.com:
Reworked MPC5121 NAND driver. Attempted to address all the problems listed by Scott Wood. Driver is now board independent. Will still need more work to be SOC independent.
Driver for the NAND controller on MPC5121.
This driver has been tested on ADS5121 rev4 / MPC5121e rev2 only which has the following configuration: 2K page size 8 bit device width
This should work on other boards with MPC5121 rev2 silicon with little or no change to the driver.
Various vintages of this controller exist on some iMX parts. Getting it to work on an iMX with the same controller version should be fairly easy. More work if it is an iMX with a different version on the controller.
The i.MX31 seems to have NFC v1 while i.MX32 has v2, would that mean that your driver is likely to work with i.MX32?
Regards, Magnus