This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it.
Cc: Boris Brezillon boris.brezillon@free-electrons.com Signed-off-by: Tom Rini trini@konsulko.com --- arch/arm/mach-imx/mx6/Kconfig | 4 - board/seco/Kconfig | 65 ----------- board/seco/common/Makefile | 3 - board/seco/common/mx6.c | 137 ---------------------- board/seco/common/mx6.h | 9 -- board/seco/mx6quq7/MAINTAINERS | 6 - board/seco/mx6quq7/Makefile | 5 - board/seco/mx6quq7/mx6quq7-2g.cfg | 172 ---------------------------- board/seco/mx6quq7/mx6quq7.c | 181 ------------------------------ configs/secomx6quq7_defconfig | 39 ------- include/configs/secomx6quq7.h | 81 ------------- 11 files changed, 702 deletions(-) delete mode 100644 board/seco/Kconfig delete mode 100644 board/seco/common/Makefile delete mode 100644 board/seco/common/mx6.c delete mode 100644 board/seco/common/mx6.h delete mode 100644 board/seco/mx6quq7/MAINTAINERS delete mode 100644 board/seco/mx6quq7/Makefile delete mode 100644 board/seco/mx6quq7/mx6quq7-2g.cfg delete mode 100644 board/seco/mx6quq7/mx6quq7.c delete mode 100644 configs/secomx6quq7_defconfig delete mode 100644 include/configs/secomx6quq7.h
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index efd5ae054f6d..013468833984 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -546,9 +546,6 @@ config TARGET_PCL063_ULL select DM_THERMAL select SUPPORT_SPL
-config TARGET_SECOMX6 - bool "secomx6 boards" - config TARGET_SKSIMX6 bool "sks-imx6" depends on MX6QDL @@ -729,7 +726,6 @@ source "board/softing/vining_2000/Kconfig" source "board/liebherr/display5/Kconfig" source "board/liebherr/mccmon6/Kconfig" source "board/logicpd/imx6/Kconfig" -source "board/seco/Kconfig" source "board/sks-kinkel/sksimx6/Kconfig" source "board/solidrun/mx6cuboxi/Kconfig" source "board/somlabs/visionsom-6ull/Kconfig" diff --git a/board/seco/Kconfig b/board/seco/Kconfig deleted file mode 100644 index 12dd965ad52a..000000000000 --- a/board/seco/Kconfig +++ /dev/null @@ -1,65 +0,0 @@ -if TARGET_SECOMX6 - -choice - prompt "SECO i.MX6 Board variant" - optional - -config SECOMX6_Q7 - bool "Q7" - -config SECOMX6_UQ7 - bool "uQ7" - -config SECOMX6_USBC - bool "uSBC" - -endchoice - -choice - prompt "SECO i.MX6 SoC variant" - optional - -config SECOMX6Q - bool "i.MX6Q" - depends on MX6Q - -config SECOMX6DL - bool "i.MX6DL" - depends on MX6DL - -config SECOMX6S - bool "i.MX6S" - depends on MX6S - -endchoice - -choice - prompt "DDR size" - -config SECOMX6_512MB - bool "512MB" - -config SECOMX6_1GB - bool "1GB" - -config SECOMX6_2GB - bool "2GB" - -config SECOMX6_4GB - bool "4GB" - -endchoice - -config IMX_CONFIG - default "board/seco/mx6quq7/mx6quq7-2g.cfg" if SECOMX6_UQ7 && SECOMX6Q && SECOMX6_2GB - -config SYS_BOARD - default "mx6quq7" if SECOMX6_UQ7 && SECOMX6Q - -config SYS_VENDOR - default "seco" - -config SYS_CONFIG_NAME - default "secomx6quq7" if SECOMX6_UQ7 && SECOMX6Q - -endif diff --git a/board/seco/common/Makefile b/board/seco/common/Makefile deleted file mode 100644 index 4220e89bc5c0..000000000000 --- a/board/seco/common/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ - -obj-$(CONFIG_TARGET_SECOMX6) += mx6.o diff --git a/board/seco/common/mx6.c b/board/seco/common/mx6.c deleted file mode 100644 index 51832b9d082f..000000000000 --- a/board/seco/common/mx6.c +++ /dev/null @@ -1,137 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2013 Freescale Semiconductor, Inc. - * Copyright (C) 2015 ECA Sinters - * - * Author: Fabio Estevam fabio.estevam@freescale.com - * Modified by: Boris Brezillon boris.brezillon@free-electrons.com - */ - -#include <asm/arch/clock.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/iomux.h> -#include <asm/arch/mx6-pins.h> -#include <linux/errno.h> -#include <asm/gpio.h> -#include <asm/mach-imx/iomux-v3.h> -#include <asm/mach-imx/boot_mode.h> -#include <mmc.h> -#include <fsl_esdhc_imx.h> -#include <miiphy.h> -#include <netdev.h> -#include <asm/arch/mxc_hdmi.h> -#include <asm/arch/crm_regs.h> -#include <linux/fb.h> -#include <ipu_pixfmt.h> -#include <asm/io.h> -#include <asm/arch/sys_proto.h> -#include <micrel.h> -#include <asm/mach-imx/mxc_i2c.h> -#include <i2c.h> - -#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ - PAD_CTL_SRE_FAST | PAD_CTL_HYS) - -static iomux_v3_cfg_t const uart2_pads[] = { - MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), -}; - -void seco_mx6_setup_uart_iomux(void) -{ - imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads)); -} - -#define ENET_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ - PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | \ - PAD_CTL_HYS) - -static iomux_v3_cfg_t const enet_pads[] = { - MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), -}; - -void seco_mx6_setup_enet_iomux(void) -{ - imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads)); -} - -int seco_mx6_rgmii_rework(struct phy_device *phydev) -{ - /* control data pad skew - devaddr = 0x02, register = 0x04 */ - ksz9031_phy_extended_write(phydev, 0x02, - MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW, - MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000); - /* rx data pad skew - devaddr = 0x02, register = 0x05 */ - ksz9031_phy_extended_write(phydev, 0x02, - MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, - MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000); - /* tx data pad skew - devaddr = 0x02, register = 0x05 */ - ksz9031_phy_extended_write(phydev, 0x02, - MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, - MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000); - - /* gtx and rx clock pad skew - devaddr = 0x02, register = 0x08 */ - ksz9031_phy_extended_write(phydev, 0x02, - MII_KSZ9031_EXT_RGMII_CLOCK_SKEW, - MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x03FF); - return 0; -} - -#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ - PAD_CTL_SPEED_LOW | \ - PAD_CTL_DSE_80ohm | \ - PAD_CTL_SRE_FAST | \ - PAD_CTL_HYS) - -static iomux_v3_cfg_t const usdhc3_pads[] = { - MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), -}; - -static iomux_v3_cfg_t const usdhc4_pads[] = { - MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), -}; - -void seco_mx6_setup_usdhc_iomux(int id) -{ - switch (id) { - case 3: - imx_iomux_v3_setup_multiple_pads(usdhc3_pads, - ARRAY_SIZE(usdhc3_pads)); - break; - - case 4: - imx_iomux_v3_setup_multiple_pads(usdhc4_pads, - ARRAY_SIZE(usdhc4_pads)); - break; - - default: - printf("Warning: invalid usdhc id (%d)\n", id); - break; - } -} diff --git a/board/seco/common/mx6.h b/board/seco/common/mx6.h deleted file mode 100644 index a05db673e284..000000000000 --- a/board/seco/common/mx6.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __SECO_COMMON_MX6_H -#define __SECO_COMMON_MX6_H - -void seco_mx6_setup_uart_iomux(void); -void seco_mx6_setup_enet_iomux(void); -int seco_mx6_rgmii_rework(struct phy_device *phydev); -void seco_mx6_setup_usdhc_iomux(int id); - -#endif /* __SECO_COMMON_MX6_H */ diff --git a/board/seco/mx6quq7/MAINTAINERS b/board/seco/mx6quq7/MAINTAINERS deleted file mode 100644 index 60fd4caab8f5..000000000000 --- a/board/seco/mx6quq7/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -MX6QUQ7 BOARD -M: Boris Brezillon boris.brezillon@free-electrons.com -S: Maintained -F: board/seco/mx6quq7/ -F: include/configs/secomx6quq7.h -F: configs/secomx6quq7_defconfig diff --git a/board/seco/mx6quq7/Makefile b/board/seco/mx6quq7/Makefile deleted file mode 100644 index c7aea8c851a5..000000000000 --- a/board/seco/mx6quq7/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2015 ECA Sinters - -obj-y := mx6quq7.o diff --git a/board/seco/mx6quq7/mx6quq7-2g.cfg b/board/seco/mx6quq7/mx6quq7-2g.cfg deleted file mode 100644 index 68d13cc92bc8..000000000000 --- a/board/seco/mx6quq7/mx6quq7-2g.cfg +++ /dev/null @@ -1,172 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (C) 2013 Seco USA Inc - * - * Refer doc/imx/mkimage/imximage.txt for more details about how-to configure - * and create imximage boot image - * - * The syntax is taken as close as possible with the kwbimage - */ - -/* image version */ -IMAGE_VERSION 2 - -/* - * Boot Device : one of - * spi, sd (the board has no nand neither onenand) - */ -BOOT_FROM sd - -#define __ASSEMBLY__ -#include <config.h> -#include "asm/arch/mx6-ddr.h" -#include "asm/arch/iomux.h" -#include "asm/arch/crm_regs.h" - -/* DDR IO TYPE */ -DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000 -DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000 - -/* DATA STROBE */ -DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000 -DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000028 -DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000028 -DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000028 -DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000028 -DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000028 -DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000028 -DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000028 -DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000028 - -/* DATA */ -DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000 -DATA 4, MX6_IOM_GRP_B0DS, 0x00000028 -DATA 4, MX6_IOM_GRP_B1DS, 0x00000028 -DATA 4, MX6_IOM_GRP_B2DS, 0x00000028 -DATA 4, MX6_IOM_GRP_B3DS, 0x00000028 -DATA 4, MX6_IOM_GRP_B4DS, 0x00000028 -DATA 4, MX6_IOM_GRP_B5DS, 0x00000028 -DATA 4, MX6_IOM_GRP_B6DS, 0x00000028 -DATA 4, MX6_IOM_GRP_B7DS, 0x00000028 -DATA 4, MX6_IOM_DRAM_DQM0, 0x00000028 -DATA 4, MX6_IOM_DRAM_DQM1, 0x00000028 -DATA 4, MX6_IOM_DRAM_DQM2, 0x00000028 -DATA 4, MX6_IOM_DRAM_DQM3, 0x00000028 -DATA 4, MX6_IOM_DRAM_DQM4, 0x00000028 -DATA 4, MX6_IOM_DRAM_DQM5, 0x00000028 -DATA 4, MX6_IOM_DRAM_DQM6, 0x00000028 -DATA 4, MX6_IOM_DRAM_DQM7, 0x00000028 -/* ADDRESS */ -DATA 4, MX6_IOM_GRP_ADDDS, 0x00000028 -DATA 4, MX6_IOM_DRAM_CAS, 0x00000028 -DATA 4, MX6_IOM_DRAM_RAS, 0x00000028 - -/* CONTROL */ -DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030 -DATA 4, MX6_IOM_DRAM_RESET, 0x00000028 -DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000 -DATA 4, MX6_IOM_DRAM_SDODT0, 0x00000028 -DATA 4, MX6_IOM_DRAM_SDODT1, 0x00000028 - -/* CLOCK */ -DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00000028 -DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00000028 - -/* - * DDR3 SETTINGS - * Read Data Bit Delay - */ -DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333 -DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333 -DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333 -DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333 -DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333 -DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333 -DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333 -DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333 - - -/* Write Leveling */ -DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x001F001F -DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F -DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x001F0001 -DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x001F001F - -/* DQS gating, read delay, write delay calibration values */ -DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x431A0326 -DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x0323031B -DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x433F0340 -DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x0345031C - -/* Read calibration */ -DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x40343137 -DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x40372F45 - -/* write calibration */ -DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x32414741 -DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x4731473C - -/* Complete calibration by forced measurement: */ -DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 -DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 - -/* - * MMDC init: - * in DDR3, 64-bit mode, only MMDC0 is init - */ -DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036 -DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040 - -DATA 4, MX6_MMDC_P0_MDCFG0, 0x898E7955 -DATA 4, MX6_MMDC_P0_MDCFG1, 0xFF328F64 -DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB - -DATA 4, MX6_MMDC_P0_MDMISC, 0x00001740 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000 -DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 -DATA 4, MX6_MMDC_P0_MDOR, 0x008E1023 - -/* CS0_END = 2304MB in step da 256Mb -> [(2304*8/256) - 1] */ -DATA 4, MX6_MMDC_P0_MDASP, 0x00000047 - -/* SDE_1=0; ROW=3; BL=1; DSIZ=2 -> 64 bit */ -DATA 4, MX6_MMDC_P0_MDCTL, 0x841A0000 - -/* Initialize DDR3 on CS_0 and CS_1 */ -DATA 4, MX6_MMDC_P0_MDSCR, 0x02088032 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031 - -/* P0 01c */ -/* write 0x0940 to MR0 bank_0 (Burst Type=1 (Interlived)) */ -DATA 4, MX6_MMDC_P0_MDSCR, 0x09408030 - -/*ZQ - Calibrationi */ -DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xa1390003 -DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 -DATA 4, MX6_MMDC_P0_MDREF, 0x00007800 - -DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227 -DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227 - -DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576 - -DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 -DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 - -/* set the default clock gate to save power */ -DATA 4, CCM_CCGR0, 0x00C03F3F -DATA 4, CCM_CCGR1, 0x0030FC03 -DATA 4, CCM_CCGR2, 0x0FFFC000 -DATA 4, CCM_CCGR3, 0x3FF00000 -DATA 4, CCM_CCGR4, 0x00FFF300 -DATA 4, CCM_CCGR5, 0x0F0000C3 -DATA 4, CCM_CCGR6, 0x000003FF - -/* enable AXI cache for VDOA/VPU/IPU */ -DATA 4, MX6_IOMUXC_GPR4, 0xF00000FF - -/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ -DATA 4, MX6_IOMUXC_GPR6, 0x007F007F -DATA 4, MX6_IOMUXC_GPR7, 0x007F007F - diff --git a/board/seco/mx6quq7/mx6quq7.c b/board/seco/mx6quq7/mx6quq7.c deleted file mode 100644 index a061d7d8afbc..000000000000 --- a/board/seco/mx6quq7/mx6quq7.c +++ /dev/null @@ -1,181 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2013 Freescale Semiconductor, Inc. - * Copyright (C) 2015 ECA Sinters - * - * Author: Fabio Estevam fabio.estevam@freescale.com - * Modified by: Boris Brezillon boris.brezillon@free-electrons.com - */ - -#include <init.h> -#include <net.h> -#include <asm/arch/clock.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/iomux.h> -#include <asm/arch/mx6-pins.h> -#include <asm/global_data.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <asm/gpio.h> -#include <asm/mach-imx/iomux-v3.h> -#include <asm/mach-imx/boot_mode.h> -#include <malloc.h> -#include <mmc.h> -#include <fsl_esdhc_imx.h> -#include <miiphy.h> -#include <netdev.h> -#include <asm/arch/mxc_hdmi.h> -#include <asm/arch/crm_regs.h> -#include <linux/fb.h> -#include <ipu_pixfmt.h> -#include <asm/io.h> -#include <asm/arch/sys_proto.h> -#include <asm/mach-imx/mxc_i2c.h> -#include <i2c.h> - -#include "../common/mx6.h" - -DECLARE_GLOBAL_DATA_PTR; - -int dram_init(void) -{ - gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); - - return 0; -} - -int board_early_init_f(void) -{ - seco_mx6_setup_uart_iomux(); - - return 0; -} - -int board_phy_config(struct phy_device *phydev) -{ - seco_mx6_rgmii_rework(phydev); - if (phydev->drv->config) - phydev->drv->config(phydev); - - return 0; -} - -int board_eth_init(struct bd_info *bis) -{ - uint32_t base = IMX_FEC_BASE; - struct mii_dev *bus = NULL; - struct phy_device *phydev = NULL; - int ret = 0; - - seco_mx6_setup_enet_iomux(); - -#ifdef CONFIG_FEC_MXC - bus = fec_get_miibus(base, -1); - if (!bus) - return -ENOMEM; - - /* scan phy 4,5,6,7 */ - phydev = phy_find_by_mask(bus, (0xf << 4), PHY_INTERFACE_MODE_RGMII); - if (!phydev) { - free(bus); - return -ENOMEM; - } - - printf("using phy at %d\n", phydev->addr); - ret = fec_probe(bis, -1, base, bus, phydev); - if (ret) { - free(phydev); - free(bus); - printf("FEC MXC: %s:failed\n", __func__); - } -#endif - - return ret; -} - -#define USDHC4_CD_GPIO IMX_GPIO_NR(2, 6) - -static struct fsl_esdhc_cfg usdhc_cfg[2] = { - {USDHC3_BASE_ADDR, 0, 4}, - {USDHC4_BASE_ADDR, 0, 4}, -}; - -int board_mmc_getcd(struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - int ret = 0; - - switch (cfg->esdhc_base) { - case USDHC3_BASE_ADDR: - ret = 1; /* Assume eMMC is always present */ - break; - case USDHC4_BASE_ADDR: - ret = !gpio_get_value(USDHC4_CD_GPIO); - break; - } - - return ret; -} - -int board_mmc_init(struct bd_info *bis) -{ - u32 index = 0; - int ret; - - /* - * Following map is done: - * (U-Boot device node) (Physical Port) - * mmc0 eMMC on Board - * mmc1 Ext SD - */ - for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) { - switch (index) { - case 0: - seco_mx6_setup_usdhc_iomux(3); - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - break; - case 1: - seco_mx6_setup_usdhc_iomux(4); - usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); - break; - - default: - printf("Warning: %d exceed maximum number of SD ports %d\n", - index + 1, CONFIG_SYS_FSL_USDHC_NUM); - return -EINVAL; - } - - ret = fsl_esdhc_initialize(bis, &usdhc_cfg[index]); - if (ret) - return ret; - } - - return 0; -} - -int board_init(void) -{ - /* address of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - - imx_iomux_v3_setup_pad(MX6_PAD_NANDF_D4__GPIO2_IO04 | - MUX_PAD_CTRL(NO_PAD_CTRL)); - - gpio_direction_output(IMX_GPIO_NR(2, 4), 0); - - /* Set Low */ - gpio_set_value(IMX_GPIO_NR(2, 4), 0); - udelay(1000); - - /* Set High */ - gpio_set_value(IMX_GPIO_NR(2, 4), 1); - - return 0; -} - -int checkboard(void) -{ - puts("Board: SECO uQ7\n"); - - return 0; -} diff --git a/configs/secomx6quq7_defconfig b/configs/secomx6quq7_defconfig deleted file mode 100644 index cc56b2e2b6c4..000000000000 --- a/configs/secomx6quq7_defconfig +++ /dev/null @@ -1,39 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_MX6=y -CONFIG_SYS_TEXT_BASE=0x17800000 -CONFIG_NR_DRAM_BANKS=1 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0xC0000 -CONFIG_MX6Q=y -CONFIG_TARGET_SECOMX6=y -CONFIG_SECOMX6_UQ7=y -CONFIG_SECOMX6Q=y -CONFIG_SECOMX6_2GB=y -CONFIG_SUPPORT_RAW_INITRD=y -CONFIG_BOOTDELAY=3 -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="SECO MX6Q uQ7 U-Boot > " -CONFIG_CMD_BOOTZ=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_MMC=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_BOUNCE_BUFFER=y -CONFIG_FSL_USDHC=y -CONFIG_PHYLIB=y -CONFIG_PHY_MICREL=y -CONFIG_PHY_MICREL_KSZ90X1=y -CONFIG_MII=y -CONFIG_MXC_UART=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/secomx6quq7.h b/include/configs/secomx6quq7.h deleted file mode 100644 index bd3c3402c485..000000000000 --- a/include/configs/secomx6quq7.h +++ /dev/null @@ -1,81 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2013 Seco S.r.l - * - * Configuration settings for the Seco Boards. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include "mx6_common.h" - -#define CONFIG_BOARD_REVISION_TAG - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) - -#define CONFIG_MXC_UART_BASE UART2_BASE - -/* MMC Configuration */ -#define CONFIG_SYS_FSL_USDHC_NUM 2 -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 - -/* Ethernet Configuration */ -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_ETHPRIME "FEC" -#define CONFIG_FEC_MXC_PHYADDR 6 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "ethprime=FEC0\0" \ - "netdev=eth0\0" \ - "ethprime=FEC0\0" \ - "uboot=u-boot.bin\0" \ - "kernel=uImage\0" \ - "nfsroot=/opt/eldk/arm\0" \ - "ip_local=10.0.0.5::10.0.0.1:255.255.255.0::eth0:off\0" \ - "ip_server=10.0.0.1\0" \ - "nfs_path=/targetfs \0" \ - "memory=mem=1024M\0" \ - "bootdev=mmc dev 0; ext2load mmc 0:1\0" \ - "root=root=/dev/mmcblk0p1\0" \ - "option=rootwait rw fixrtc rootflags=barrier=1\0" \ - "cpu_freq=arm_freq=996\0" \ - "setbootargs=setenv bootargs console=ttymxc1,115200 ${root}" \ - " ${option} ${memory} ${cpu_freq}\0" \ - "setbootargs_nfs=setenv bootargs console=ttymxc1,115200" \ - " root=/dev/nfs nfsroot=${ip_server}:${nfs_path}" \ - " nolock,wsize=4096,rsize=4096 ip=:::::eth0:dhcp" \ - " ${memory} ${cpu_freq}\0" \ - "setbootdev=setenv boot_dev ${bootdev} 10800000 /boot/uImage\0" \ - "bootcmd=run setbootargs; run setbootdev; run boot_dev;" \ - " bootm 0x10800000\0" \ - "stdin=serial\0" \ - "stdout=serial\0" \ - "stderr=serial\0" - -#define CONFIG_SYS_HZ 1000 - -/* Physical Memory Map */ -#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR -#define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024) - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* Environment organization */ - -#if defined(CONFIG_ENV_IS_IN_MMC) - #define CONFIG_DYNAMIC_MMC_DEVNO -#endif - -#endif /* __CONFIG_H */