From: Jagan Teki jagan@amarulasolutions.com
Add initial dts support for i.MX6 Quad Plus Sabresd board.
Boot from MMC: ------------- U-Boot SPL 2017.03-33690-ga80e4f6-dirty (Mar 30 2017 - 00:40:29) Trying to boot from MMC1
U-Boot 2017.03-33690-ga80e4f6-dirty (Mar 30 2017 - 00:40:29 +0530)
CPU: Freescale i.MX6QP rev1.0 996 MHz (running at 792 MHz) CPU: Automotive temperature grade (-40C to 125C) at 29C Reset cause: POR Model: Freescale i.MX6 Quad Plus SABRE Smart Device Board Board: MX6-SabreSD I2C: ready DRAM: 1 GiB PMIC: PFUZE100 ID=0x10 MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 *** Warning - bad CRC, using default environment
gpio@020a4000: dir_output: error: gpio GPIO3_19 not reserved gpio@020a4000: set_value: error: gpio GPIO3_19 not reserved gpio@020b4000: dir_output: error: gpio GPIO7_12 not reserved gpio@020b4000: set_value: error: gpio GPIO7_12 not reserved PCI: pcie phy link never came up No panel detected: default to Hannstar-XGA gpio@0209c000: dir_output: error: gpio GPIO1_21 not reserved Display: Hannstar-XGA (1024x768) In: serial Out: serial Err: serial Net: gpio@0209c000: dir_output: error: gpio GPIO1_25 not reserved gpio@0209c000: set_value: error: gpio GPIO1_25 not reserved FEC [PRIME] Hit any key to stop autoboot: 0 =>
Cc: Stefano Babic sbabic@denx.de Cc: Fabio Estevam fabio.estevam@nxp.com Cc: Michael Trimarchi michael@amarulasolutions.com Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- board/freescale/mx6sabresd/MAINTAINERS | 1 + configs/imx6qp_sabresd_defconfig | 60 ++++++++++++++++++++++++++++++++++ 2 files changed, 61 insertions(+) create mode 100644 configs/imx6qp_sabresd_defconfig
diff --git a/board/freescale/mx6sabresd/MAINTAINERS b/board/freescale/mx6sabresd/MAINTAINERS index 434548a..40507f8 100644 --- a/board/freescale/mx6sabresd/MAINTAINERS +++ b/board/freescale/mx6sabresd/MAINTAINERS @@ -7,3 +7,4 @@ F: configs/mx6dlsabresd_defconfig F: configs/mx6qsabresd_defconfig F: configs/mx6sabresd_spl_defconfig F: configs/imx6q_sabresd_defconfig +F: configs/imx6qp_sabresd_defconfig diff --git a/configs/imx6qp_sabresd_defconfig b/configs/imx6qp_sabresd_defconfig new file mode 100644 index 0000000..73fbdb2 --- /dev/null +++ b/configs/imx6qp_sabresd_defconfig @@ -0,0 +1,60 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX6=y +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_TARGET_MX6SABRESD=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_LIBDISK_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_VIDEO=y +CONFIG_DEFAULT_DEVICE_TREE="imx6qp-sabresd" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" +CONFIG_BOOTDELAY=3 +CONFIG_DEFAULT_FDT_FILE="imx6qp-sabresd.dtb" +# CONFIG_CONSOLE_MUX is not set +CONFIG_SYS_CONSOLE_IS_IN_ENV=y +CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y +CONFIG_SPL=y +CONFIG_SPL_EXT_SUPPORT=y +CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_OS_BOOT=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_PCI=y +CONFIG_USB=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_CI_UDC=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_G_DNL_MANUFACTURER="FSL" +CONFIG_G_DNL_VENDOR_NUM=0x0525 +CONFIG_G_DNL_PRODUCT_NUM=0xa4a5 +# CONFIG_VIDEO_SW_CURSOR is not set +CONFIG_OF_LIBFDT=y +CONFIG_OF_CONTROL=y +CONFIG_DM_GPIO=y +CONFIG_DM_MMC=y +# CONFIG_BLK is not set +# CONFIG_DM_MMC_OPS is not set +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y