Add support in the driver for handling phy specific registers.
Signed-off-by: Faiz Abbas faiz_abbas@ti.com Reviewed-by: Tom Rini trini@konsulko.com --- drivers/mmc/Kconfig | 1 + drivers/mmc/am654_sdhci.c | 223 +++++++++++++++++++++++++++++++++++++- 2 files changed, 218 insertions(+), 6 deletions(-)
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 0062ad1bb9..41e8a270d8 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -458,6 +458,7 @@ config MMC_SDHCI_AM654 depends on ARCH_K3 depends on MMC_SDHCI depends on DM_MMC && OF_CONTROL && BLK + depends on REGMAP help Support for Secure Digital Host Controller Interface (SDHCI) controllers present on TI's AM654 SOCs. diff --git a/drivers/mmc/am654_sdhci.c b/drivers/mmc/am654_sdhci.c index a8c92277f7..cd7ad03479 100644 --- a/drivers/mmc/am654_sdhci.c +++ b/drivers/mmc/am654_sdhci.c @@ -10,16 +10,184 @@ #include <dm.h> #include <malloc.h> #include <power-domain.h> +#include <regmap.h> #include <sdhci.h>
+/* CTL_CFG Registers */ +#define CTL_CFG_2 0x14 + +#define SLOTTYPE_MASK GENMASK(31, 30) +#define SLOTTYPE_EMBEDDED BIT(30) + +/* PHY Registers */ +#define PHY_CTRL1 0x100 +#define PHY_CTRL2 0x104 +#define PHY_CTRL3 0x108 +#define PHY_CTRL4 0x10C +#define PHY_CTRL5 0x110 +#define PHY_CTRL6 0x114 +#define PHY_STAT1 0x130 +#define PHY_STAT2 0x134 + +#define IOMUX_ENABLE_SHIFT 31 +#define IOMUX_ENABLE_MASK BIT(IOMUX_ENABLE_SHIFT) +#define OTAPDLYENA_SHIFT 20 +#define OTAPDLYENA_MASK BIT(OTAPDLYENA_SHIFT) +#define OTAPDLYSEL_SHIFT 12 +#define OTAPDLYSEL_MASK GENMASK(15, 12) +#define STRBSEL_SHIFT 24 +#define STRBSEL_MASK GENMASK(27, 24) +#define SEL50_SHIFT 8 +#define SEL50_MASK BIT(SEL50_SHIFT) +#define SEL100_SHIFT 9 +#define SEL100_MASK BIT(SEL100_SHIFT) +#define DLL_TRIM_ICP_SHIFT 4 +#define DLL_TRIM_ICP_MASK GENMASK(7, 4) +#define DR_TY_SHIFT 20 +#define DR_TY_MASK GENMASK(22, 20) +#define ENDLL_SHIFT 1 +#define ENDLL_MASK BIT(ENDLL_SHIFT) +#define DLLRDY_SHIFT 0 +#define DLLRDY_MASK BIT(DLLRDY_SHIFT) +#define PDB_SHIFT 0 +#define PDB_MASK BIT(PDB_SHIFT) +#define CALDONE_SHIFT 1 +#define CALDONE_MASK BIT(CALDONE_SHIFT) +#define RETRIM_SHIFT 17 +#define RETRIM_MASK BIT(RETRIM_SHIFT) + +#define DRIVER_STRENGTH_50_OHM 0x0 +#define DRIVER_STRENGTH_33_OHM 0x1 +#define DRIVER_STRENGTH_66_OHM 0x2 +#define DRIVER_STRENGTH_100_OHM 0x3 +#define DRIVER_STRENGTH_40_OHM 0x4 + #define AM654_SDHCI_MIN_FREQ 400000
struct am654_sdhci_plat { struct mmc_config cfg; struct mmc mmc; unsigned int f_max; + struct regmap *base; + bool non_removable; + u32 otap_del_sel; + u32 trm_icp; + u32 drv_strength; + bool dll_on; +}; + +static int am654_sdhci_set_ios_post(struct sdhci_host *host) +{ + struct udevice *dev = host->mmc->dev; + struct am654_sdhci_plat *plat = dev_get_platdata(dev); + unsigned int speed = host->mmc->clock; + int sel50, sel100; + u32 mask, val; + int ret; + + /* Reset SD Clock Enable */ + val = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + val &= ~SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, val, SDHCI_CLOCK_CONTROL); + + /* power off phy */ + if (plat->dll_on) { + regmap_update_bits(plat->base, PHY_CTRL1, ENDLL_MASK, 0); + + plat->dll_on = false; + } + + /* restart clock */ + sdhci_set_clock(host->mmc, speed); + + /* switch phy back on */ + if (speed > AM654_SDHCI_MIN_FREQ) { + mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK; + val = (1 << OTAPDLYENA_SHIFT) | + (plat->otap_del_sel << OTAPDLYSEL_SHIFT); + regmap_update_bits(plat->base, PHY_CTRL4, mask, val); + switch (speed) { + case 200000000: + sel50 = 0; + sel100 = 0; + break; + case 100000000: + sel50 = 0; + sel100 = 1; + break; + default: + sel50 = 1; + sel100 = 0; + } + + /* Configure PHY DLL frequency */ + mask = SEL50_MASK | SEL100_MASK; + val = (sel50 << SEL50_SHIFT) | (sel100 << SEL100_SHIFT); + regmap_update_bits(plat->base, PHY_CTRL5, mask, val); + + /* Enable DLL */ + regmap_update_bits(plat->base, PHY_CTRL1, ENDLL_MASK, + 0x1 << ENDLL_SHIFT); + /* + * Poll for DLL ready. Use a one second timeout. + * Works in all experiments done so far + */ + ret = regmap_read_poll_timeout(plat->base, PHY_STAT1, val, + val & DLLRDY_MASK, 1000, 1000000); + if (ret) + return ret; + + plat->dll_on = true; + } + + return 0; +} + +const struct sdhci_ops am654_sdhci_ops = { + .set_ios_post = &am654_sdhci_set_ios_post, };
+int am654_sdhci_init(struct am654_sdhci_plat *plat) +{ + u32 ctl_cfg_2 = 0; + u32 mask, val; + int ret; + + /* Reset OTAP to default value */ + mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK; + regmap_update_bits(plat->base, PHY_CTRL4, mask, 0x0); + + regmap_read(plat->base, PHY_STAT1, &val); + if (~val & CALDONE_MASK) { + /* Calibrate IO lines */ + regmap_update_bits(plat->base, PHY_CTRL1, PDB_MASK, PDB_MASK); + ret = regmap_read_poll_timeout(plat->base, PHY_STAT1, val, + val & CALDONE_MASK, 1, 20); + if (ret) + return ret; + } + + /* Configure DLL TRIM */ + mask = DLL_TRIM_ICP_MASK; + val = plat->trm_icp << DLL_TRIM_ICP_SHIFT; + + /* Configure DLL driver strength */ + mask |= DR_TY_MASK; + val |= plat->drv_strength << DR_TY_SHIFT; + regmap_update_bits(plat->base, PHY_CTRL1, mask, val); + + /* Enable pins by setting IO mux to 0 */ + regmap_update_bits(plat->base, PHY_CTRL1, IOMUX_ENABLE_MASK, 0); + + /* Set slot type based on SD or eMMC */ + if (plat->non_removable) + ctl_cfg_2 = SLOTTYPE_EMBEDDED; + + regmap_update_bits(plat->base, CTL_CFG_2, SLOTTYPE_MASK, ctl_cfg_2); + + return 0; +} + static int am654_sdhci_probe(struct udevice *dev) { struct am654_sdhci_plat *plat = dev_get_platdata(dev); @@ -55,16 +223,20 @@ static int am654_sdhci_probe(struct udevice *dev) }
host->max_clk = clock; - - ret = sdhci_setup_cfg(&plat->cfg, host, plat->f_max, - AM654_SDHCI_MIN_FREQ); host->mmc = &plat->mmc; + host->mmc->dev = dev; + ret = sdhci_setup_cfg(cfg, host, cfg->f_max, + AM654_SDHCI_MIN_FREQ); if (ret) return ret; + host->ops = &am654_sdhci_ops; host->mmc->priv = host; - host->mmc->dev = dev; upriv->mmc = host->mmc;
+ regmap_init_mem_index(dev_ofnode(dev), &plat->base, 1); + + am654_sdhci_init(plat); + return sdhci_probe(dev); }
@@ -72,11 +244,50 @@ static int am654_sdhci_ofdata_to_platdata(struct udevice *dev) { struct am654_sdhci_plat *plat = dev_get_platdata(dev); struct sdhci_host *host = dev_get_priv(dev); + struct mmc_config *cfg = &plat->cfg; + u32 drv_strength; + int ret;
host->name = dev->name; host->ioaddr = (void *)dev_read_addr(dev); - host->bus_width = dev_read_u32_default(dev, "bus-width", 4); - plat->f_max = dev_read_u32_default(dev, "max-frequency", 0); + plat->non_removable = dev_read_bool(dev, "non-removable"); + + ret = dev_read_u32(dev, "ti,trm-icp", &plat->trm_icp); + if (ret) + return ret; + + ret = dev_read_u32(dev, "ti,otap-del-sel", &plat->otap_del_sel); + if (ret) + return ret; + + ret = dev_read_u32(dev, "ti,driver-strength-ohm", &drv_strength); + if (ret) + return ret; + + switch (drv_strength) { + case 50: + plat->drv_strength = DRIVER_STRENGTH_50_OHM; + break; + case 33: + plat->drv_strength = DRIVER_STRENGTH_33_OHM; + break; + case 66: + plat->drv_strength = DRIVER_STRENGTH_66_OHM; + break; + case 100: + plat->drv_strength = DRIVER_STRENGTH_100_OHM; + break; + case 40: + plat->drv_strength = DRIVER_STRENGTH_40_OHM; + break; + default: + dev_err(dev, "Invalid driver strength\n"); + return -EINVAL; + } + + ret = mmc_of_parse(dev, cfg); + if (ret) + return ret;
return 0; }