Dear Gianluca,in message <3F68D1DF.7020007@libero.it> you wrote:> > I send you my patch for s3c2410 ARM processor. This patch implements > boot directly from nandflash. I haven't created new board in board > directory but I have writed new config-file (smdk2410nand.h) that use > smdk2410 board.I have forwarded your patch to David M?刜ler who is the maintainer forthe SMDK2410 board; I cannot test it myself.> I tested with MAKEALL ARM9 my patch.> I changed the frequency of internal clock of s3c2410 (for smdk2410 > borad) because (only) in this way the Linux Mizi kernel can boot correctly.> The patch is based on u-boot 0.4.8.> > This is my first contribution to open source and I hope that it is > useful to someone.It is definitely useful, but I have a couple of questions:* Which problem are you trying to address which is not  supported  by  the existing NAND code?* Is it necessary to implement this in a processor specific way?* You add new configuration options like CONFIG_S3C2410_NAND_BOOT but  do not include any  dosumentation.  At  least,  please  provide  an  explantion  of these options for the README fie. If you feel longer  explanations are needed create a new file  doc/README.NAND-Boot  or  so.David, I've forwarded the patch to you. Can you please have a look atthe implementation details? Thanks.Best regards,Wolfgang Denk-- Software Engineering:  Embedded and Realtime Systems,  Embedded LinuxPhone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de"If God had wanted us to use the metric system, Jesus would have  had10 apostles."-------------------------------------------------------This sf.net email is sponsored by:ThinkGeekWelcome to geek heaven.http://thinkgeek.com/sf_______________________________________________U-Boot-Users mailing listU-Boot-Users@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/u-boot-users