Signed-off-by: Eric Nelson eric.nelson@boundarydevices.com --- board/boundary/nitrogen6x/nitrogen6x.c | 7 +++++-- 1 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index e70871d..469a044 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -174,6 +174,7 @@ iomux_v3_cfg_t const enet_pads1[] = { MX6Q_PAD_RGMII_RX_CTL__GPIO_6_24 | MUX_PAD_CTRL(NO_PAD_CTRL), /* pin 42 PHY nRST */ MX6Q_PAD_EIM_D23__GPIO_3_23 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6Q_PAD_ENET_RXD0__GPIO_1_27 | MUX_PAD_CTRL(NO_PAD_CTRL), };
iomux_v3_cfg_t const enet_pads2[] = { @@ -203,7 +204,8 @@ static iomux_v3_cfg_t const button_pads[] = {
static void setup_iomux_enet(void) { - gpio_direction_output(IMX_GPIO_NR(3, 23), 0); + gpio_direction_output(IMX_GPIO_NR(3, 23), 0); /* SABRE Lite PHY rst */ + gpio_direction_output(IMX_GPIO_NR(1, 27), 0); /* Nitrogen6X PHY rst */ gpio_direction_output(IMX_GPIO_NR(6, 30), 1); gpio_direction_output(IMX_GPIO_NR(6, 25), 1); gpio_direction_output(IMX_GPIO_NR(6, 27), 1); @@ -214,7 +216,8 @@ static void setup_iomux_enet(void)
/* Need delay 10ms according to KSZ9021 spec */ udelay(1000 * 10); - gpio_set_value(IMX_GPIO_NR(3, 23), 1); + gpio_set_value(IMX_GPIO_NR(3, 23), 1); /* SABRE Lite PHY reset */ + gpio_set_value(IMX_GPIO_NR(1, 27), 1); /* Nitrogen6X PHY reset */
imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2)); }