30 Aug
2013
30 Aug
'13
7:16 a.m.
Eric,
On Wed, 28 Aug 2013 16:26:44 +0200 Eric Bénard eric@eukrea.com wrote:
Le Wed, 28 Aug 2013 19:23:33 +0800, Tapani tapani@technexion.com a écrit :
Add support for TechNexion edm-cf-imx6 SoM The edm1-cf-imx6 SoM comes in three variants, one with imx6 solo cpu, one with an imx6 dual lite cpu and one with an imx6 quad cpu.aren't these boards Wandboard without the MicroSD connector but with either a eMMC or a NAND ?
No.
While u-boot level edm-cf-imx6 is compatible with Wandboard, there are differences (some different pin definitions, different wifi chips, different board ids, different maintainers, ... ). Also there is going to be a edm2-cf-imx6 module, which we are hoping to be able to share code with instead.
However if someone wants to play with the SPL boot, a edm-cf-imx6 u-boot should work on a Wandboard (after changing machine id).
//Tapani