On 11 December 2017 at 09:41, Marek Vasut marex@denx.de wrote:
On 12/11/2017 05:37 PM, Eugeniy Paltsev wrote:
On Mon, 2017-12-11 at 17:21 +0100, Marek Vasut wrote:
On 12/11/2017 05:18 PM, Eugeniy Paltsev wrote:
Add option to set spi controller clock frequency via device tree using standard clock bindings.
Define dw_spi_get_clk function as 'weak' as some targets (like SOCFPGA_GEN5 and SOCFPGA_ARRIA10) fon't use standard clock API and implement dw_spi_get_clk their own way in their clock manager.
Get rid of clock_manager.h include as we don't use cm_get_spi_controller_clk_hz function anymore. (we use redefined dw_spi_get_clk in SOCFPGA clock managers instead)
Signed-off-by: Eugeniy Paltsev Eugeniy.Paltsev@synopsys.com
drivers/spi/designware_spi.c | 43 +++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 41 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/designware_spi.c b/drivers/spi/designware_spi.c index 5aa507b..a037376 100644 --- a/drivers/spi/designware_spi.c +++ b/drivers/spi/designware_spi.c @@ -11,6 +11,7 @@ */
#include <common.h> +#include <clk.h> #include <dm.h> #include <errno.h> #include <malloc.h> @@ -18,7 +19,6 @@ #include <fdtdec.h> #include <linux/compat.h> #include <asm/io.h> -#include <asm/arch/clock_manager.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -94,6 +94,8 @@ struct dw_spi_priv { void __iomem *regs; unsigned int freq; /* Default frequency */ unsigned int mode;
struct clk clk;
unsigned long bus_clk_rate;
int bits_per_word; u8 cs; /* chip select pin */
@@ -176,14 +178,51 @@ static void spi_hw_init(struct dw_spi_priv *priv) debug("%s: fifo_len=%d\n", __func__, priv->fifo_len); }
+/*
- We define dw_spi_get_clk function as 'weak' as some targets
- (like SOCFPGA_GEN5 and SOCFPGA_ARRIA10) fon't use standard clock API
- and implement dw_spi_get_clk their own way in their clock manager.
- */
+__weak int dw_spi_get_clk(struct udevice *bus, ulong *rate) +{
- struct dw_spi_priv *priv = dev_get_priv(bus);
- int ret;
- ret = clk_get_by_index(bus, 0, &priv->clk);
- if (ret)
return -EINVAL;if (ret) return ret;
Ok.
- ret = clk_enable(&priv->clk);
- if (ret && ret != -ENOSYS && ret != -ENOSYS && ret != -ENOTSUPP)
You have ENOSYS twice in there, but you can do just if (ret) return ret again.
The idea is to skip error if error code is -ENOSYS or -ENOTSUPP as it is OK situation: some clock drivers don't implement .enable/.disable callbacks so clk_enable returns -ENOSYS. Also some clock drivers implement .enable/.disable callbacks not for all clock IDs and return -ENOSYS or -ENOTSUPP for others.
But definitely I should remove second ENOSYS here.
+CC Simon, that's somewhat iffy ...
I think it is OK.
Regards, Simon