Hi Tom,
Le 29/11/2011 23:53, Tom Rini a écrit :
The following changes since commit f2695a272849764cda09bcce6f86d03105e9e46d: Marek Vasut (1): PXA: Drop XM250 board
are available in the git repository at:
git://git.denx.de/u-boot-ti.git master
Anatolij Gustschin (1): ARM: davinci_dm6467Tevm: Fix build breakage
Aneesh V (13): armv7: disable L2 cache in cleanup_before_linux() armv7: include armv7/cpu.c in SPL build armv7: setup vector start.S: remove omap3 specific code from start.S omap: Improve PLL parameter calculation tool omap4: ttyO2 instead of ttyS2 in default bootargs omap: fix cache line size for omap3/omap4 boards omap4460: fix TPS initialization omap: remove I2C from SPL omap4: emif: fix error in driver omap4460: add ES1.1 identification omap4+: streamline CONFIG_SYS_TEXT_BASE and other SDRAM addresses omap4: fix IO setting
Christian Riesch (8): arm, davinci: Move pinmux functions from board to arch tree arm, hawkboard: Remove obsolete struct pinmux_config i2c_pins arm, da850evm: Do pinmux configuration for EMAC together with other pinmuxes arm, da850: Add pinmux configurations to the arch tree arm, da850evm: Use the pinmux configurations defined in the arch tree arm, hawkboard: Use the pinmux configurations defined in the arch tree arm, davinci: Remove duplication of pinmux configuration code arm: printf() is not available in some SPL configurations
Heiko Schocher (6): arm, arm926ejs: always do cpu critical inits arm, davinci: move davinci_rtc struct to hardware.h arm, davinci, da850: add uart1 tx rx pinmux config arm, board/davinci/common/misc.c: Codingstyle cleanup arm, davinci: move misc function in arch tree arm, davinci: add support for am1808 based enbw_cmc board
Ilya Yanok (10): davinci_emac: move arch-independent defines to separate header davinci_emac: use internal addresses in buffer descriptors davinci_emac: conditionally compile specific PHY support arm926ejs: add noop implementation for dcache ops davinci_emac: fix for running with dcache enabled davinci_emac: hardcode 100Mbps for AM35xx and RMII AM35xx: add EMAC support AM3517: move AM3517 specific mux defines to generic header nand_spl_simple: add support for software ECC omap_gpmc: use SOFTECC in SPL if it's enabled
Koen Kooi (1): BeagleBoard: config: Really switch to ttyO2
Prabhakar Lad (1): ARM: davici_emac: Fix condition for number of phy detects
Thomas Weber (3): ARM: OMAP3: Remove unused define CONFIG_OMAP3430 ARM: OMAP3: Remove unused define SDRC_R_C_B ARM: OMAP: Remove STACKSIZE for IRQ and FIQ if unused
Tom Rini (15): omap3: mem: Comment enable_gpmc_cs_config more OMAP3: Update SDRC dram_init to always call make_cs1_contiguous() OMAP3: Add a helper function to set timings in SDRC OMAP3: Change mem_ok to clear again after reading back OMAP3: Remove get_mem_type prototype omap3: mem: Add MCFG helper macro OMAP3: Add optimal SDRC autorefresh control values OMAP3: Suffix all Micron memory timing parts with their speed OMAP3 SPL: Rework memory initalization and devkit8000 support OMAP3 SPL: Add identify_nand_chip function OMAP3: Add SPL support to Beagleboard OMAP3: Add SPL support to omap3_evm AM3517: Add SPL support AM3517 CraneBoard: Add SPL support OMAP3: Add SPL_BOARD_INIT hook
Applied to u-boot-arm/master, thanks.
Amicalement,