For more details refer docs/README.kwbimage
Signed-off-by: Prafulla Wadaskar prafulla@marvell.com --- Change log: v2: strtok_r() used for simple parser algorithm updated as per feedback for v1 all line checked to be below 78 :-)
Makefile | 5 + common/image.c | 1 + doc/README.kwbimage | 93 ++++++++++++++++++ include/image.h | 1 + tools/Makefile | 1 + tools/kwbimage.c | 264 +++++++++++++++++++++++++++++++++++++++++++++++++++ tools/kwbimage.h | 104 ++++++++++++++++++++ tools/mkimage.c | 26 +++++- 8 files changed, 494 insertions(+), 1 deletions(-) create mode 100644 doc/README.kwbimage create mode 100644 tools/kwbimage.c create mode 100644 tools/kwbimage.h
diff --git a/Makefile b/Makefile index 55fc2a3..ebe00dc 100644 --- a/Makefile +++ b/Makefile @@ -339,6 +339,10 @@ $(obj)u-boot.img: $(obj)u-boot.bin sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ -d $< $@
+$(obj)u-boot.kwb: $(obj)u-boot.bin + $(obj)tools/mkimage -n $(KWD_CONFIG) -T kwbimage \ + -a $(TEXT_BASE) -e $(TEXT_BASE) -d $< $@ + $(obj)u-boot.sha1: $(obj)u-boot.bin $(obj)tools/ubsha1 $(obj)u-boot.bin
@@ -3638,6 +3642,7 @@ clobber: clean @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \ $(obj)cscope.* $(obj)*.*~ @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL) + @rm -f $(obj)u-boot.kwb @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes} @rm -f $(obj)cpu/mpc824x/bedbug_603e.c @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm diff --git a/common/image.c b/common/image.c index e22c974..845006f 100644 --- a/common/image.c +++ b/common/image.c @@ -145,6 +145,7 @@ static table_entry_t uimage_type[] = { { IH_TYPE_SCRIPT, "script", "Script", }, { IH_TYPE_STANDALONE, "standalone", "Standalone Program", }, { IH_TYPE_FLATDT, "flat_dt", "Flat Device Tree", }, + { IH_TYPE_KWBIMAGE, "kwbimage", "Kirkwood Boot Image",}, { -1, "", "", }, };
diff --git a/doc/README.kwbimage b/doc/README.kwbimage new file mode 100644 index 0000000..b8a9b6b --- /dev/null +++ b/doc/README.kwbimage @@ -0,0 +1,93 @@ +--------------------------------------------- +Kirkwood Boot Image generation using mkimage +--------------------------------------------- + +This document describes the U-Boot feature as it +is implemented for the Kirkwood family of SoCs. + +The Kirkwood SoC's can boot directly from NAND FLASH, +SPI FLASH, SATA etc. using its internal bootRom support. + +for more details refer section 24.2 of Kirkwood functional specifications. +ref: www.marvell.com/products/embedded.../kirkwood/index.jsp + +Commad syntax: +-------------- +./tools/mkimage -l <kwboot_file> + to list the kwb image file details + +./tools/mkimage -n <board specific configuration file> \ + -T kwbimage -a <start address> -e <execution address> \ + -d <input_raw_binary> <output_kwboot_file> + +for ex. +./tools/mkimage -n ./board/Marvell/openrd_base/kwbimage.cfg \ + -T kwbimage -a 0x00600000 -e 0x00600000 \ + -d u-boot.bin u-boot.kwb + +kwimage support available with mkimage utility will generate kirkwood boot +image that can be flashed on the board NAND/SPI flash + +Board specific configuration file specifications: +------------------------------------------------ +1. This file must present in the $(BOARDDIR) and the name should be + kwbimage.cfg (since this is used in Makefile) +2. This file can have empty lines and lines starting with "#" as first + character to put comments +3. This file can have configuration command lines as mentioned below, + any other information in this file is treated as invalid. + +Configuration command line syntax: +--------------------------------- +1. Each command line is must have two strings, first one command or address + and second one data string +2. Following are the valid command strings and associated data strings:- + Command string data string + -------------- ----------- + BOOT_FROM nand/spi/sata + NAND_ECC_MODE default/rs/hamming/disabled + NAND_PAGE_SIZE any uint16_t hex value + SATA_PIO_MODE any uint32_t hex value + DDR_INIT_DELAY any uint32_t hex value + <uint32_t reg addr> <uint32_t vlaue for it>, + you can have maximum 55 such register programming commands + +3. All commands are optional to program + +Typical example of kwimage.cfg file: +----------------------------------- + +# Boot Media configurations +BOOT_FROM nand +NAND_ECC_MODE default +NAND_PAGE_SIZE 0x0800 + +# Configure RGMII-0 interface pad voltage to 1.8V +0xFFD100e0 0x1b1b1b9b +# DRAM Configuration +0xFFD01400 0x43000c30 +0xFFD01404 0x37543000 +0xFFD01408 0x22125451 +0xFFD0140C 0x00000a33 +0xFFD01410 0x000000cc +0xFFD01414 0x00000000 +0xFFD01418 0x00000000 +0xFFD0141C 0x00000C52 +0xFFD01420 0x00000040 +0xFFD01424 0x0000F17F +0xFFD01428 0x00085520 +0xFFD0147C 0x00008552 +0xFFD01504 0x0FFFFFF1 +0xFFD01508 0x10000000 +0xFFD0150C 0x0FFFFFF5 +0xFFD01514 0x00000000 +0xFFD0151C 0x00000000 +0xFFD01494 0x00030000 +0xFFD01498 0x00000000 +0xFFD0149C 0x0000E803 +0xFFD01480 0x00000001 +# End of Header extension +0x0 0x0 + +------------------------------------------------ +Author: Prafulla Wadaskar prafulla@marvell.com diff --git a/include/image.h b/include/image.h index f183757..be322bd 100644 --- a/include/image.h +++ b/include/image.h @@ -158,6 +158,7 @@ #define IH_TYPE_SCRIPT 6 /* Script file */ #define IH_TYPE_FILESYSTEM 7 /* Filesystem Image (any type) */ #define IH_TYPE_FLATDT 8 /* Binary Flat Device Tree Blob */ +#define IH_TYPE_KWBIMAGE 9 /* Kirkwood Boot Image */
/* * Compression Types diff --git a/tools/Makefile b/tools/Makefile index 43c284c..5ead74c 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -167,6 +167,7 @@ $(obj)img2srec$(SFX): $(obj)img2srec.o $(STRIP) $@
$(obj)mkimage$(SFX): $(obj)mkimage.o $(obj)crc32.o $(obj)image.o $(obj)md5.o \ + $(obj)kwbimage.o \ $(obj)sha1.o $(LIBFDT_OBJS) $(obj)os_support.o $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ $(STRIP) $@ diff --git a/tools/kwbimage.c b/tools/kwbimage.c new file mode 100644 index 0000000..b1ad37a --- /dev/null +++ b/tools/kwbimage.c @@ -0,0 +1,264 @@ +/* + * (C) Copyright 2008 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar prafulla@marvell.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <errno.h> +#include <fcntl.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <sys/mman.h> +#include <sys/stat.h> +#include <sys/types.h> +#include <unistd.h> +#include "kwbimage.h" + +static struct kwb_header kwbimage_header; +static int datacmd_cnt = 0; + +/* + * Generates 8 bit checksum + */ +uint8_t kwbimage_checksum8(void *start, uint32_t len, uint8_t csum) +{ + register uint8_t sum = csum; + volatile uint8_t *startp = (volatile uint8_t *)start; + + do { + sum += *startp; + startp++; + } while (--len); + return (sum); +} + +/* + * Generates 32 bit checksum + */ +uint32_t kwbimage_checksum32(uint32_t *start, uint32_t len, uint32_t csum) +{ + register uint32_t sum = csum; + volatile uint32_t *startp = start; + + do { + sum += *startp; + startp++; + len -= sizeof(uint32_t); + } while (len > 0); + return (sum); +} + +void *kwbimage_get_header_ptr (void) +{ + return ((void *)&kwbimage_header); +} + +int kwbimage_get_header_size (void) +{ + return (sizeof (struct kwb_header)); +} + +enum kwbimage_cmd kwbimage_check_cfgcmd(char *token, + struct kwb_header *kwbhdr) +{ + extbhr_t *exthdr = &kwbhdr->kwb_exthdr; + char tempptr[MAX_TEMPBUF_LEN]; + + /* command string processing */ + if (strcmp(token, "BOOT_FROM") == 0) + return CMD_BOOT_FROM; + else if (strcmp(token, "NAND_ECC_MODE") == 0) + return CMD_NAND_ECC_MODE; + else if (strcmp(token, "NAND_PAGE_SIZE") == 0) + return CMD_NAND_PAGE_SIZE; + else if (strcmp(token, "SATA_PIO_MODE") == 0) + return CMD_SATA_PIO_MODE; + else if (strcmp(token, "DDR_INIT_DELAY") == 0) + return CMD_DDR_INIT_DELAY; + else { + exthdr->rcfg[datacmd_cnt].raddr = + (uint32_t) strtoul (token, tempptr, 16); + return CMD_DDR_DATA; + } +} + +void kwbimage_check_cfgdata(char *token, enum kwbimage_cmd cmdsw, + struct kwb_header *kwbhdr) +{ + bhr_t *mhdr = &kwbhdr->kwb_hdr; + extbhr_t *exthdr = &kwbhdr->kwb_exthdr; + char tempptr[MAX_TEMPBUF_LEN]; + + switch(cmdsw) { + case CMD_BOOT_FROM: + if (strcmp(token, "spi") == 0) { + mhdr->blockid = IBR_HDR_SPI_ID; + } else if (strcmp(token, "nand") == 0) { + mhdr->blockid = IBR_HDR_NAND_ID; + } else if (strcmp(token, "sata") == 0) { + mhdr->blockid = IBR_HDR_SATA_ID; + } else { + printf("Err.. Invalid kwimage data\n"); + exit (EXIT_FAILURE); + } + printf("Preparing kirkwood boot image to boot " + "from %s\n", token); + break; + case CMD_NAND_ECC_MODE: + if (strcmp(token, "default") == 0) { + mhdr->nandeccmode = IBR_HDR_ECC_DEFAULT; + } else if (strcmp(token, "hamming") == 0) { + mhdr->nandeccmode = + IBR_HDR_ECC_FORCED_HAMMING; + } else if (strcmp(token, "rs") == 0) { + mhdr->nandeccmode = + IBR_HDR_ECC_FORCED_RS; + } else if (strcmp(token, "disabled") == 0) { + mhdr->nandeccmode = IBR_HDR_ECC_DISABLED; + } else { + printf("Err.. Invalid kwimage data\n"); + exit (EXIT_FAILURE); + } + printf("Nand ECC mode = %s\n", token); + break; + case CMD_NAND_PAGE_SIZE: + mhdr->nandpagesize = + (uint16_t) strtoul (token, tempptr, 16); + printf("Nand page size = %x\n", mhdr->nandpagesize); + break; + case CMD_SATA_PIO_MODE: + mhdr->satapiomode = + (uint8_t) strtoul (token, tempptr, 16); + printf("Sata PIO mode = %x\n", mhdr->satapiomode); + break; + case CMD_DDR_INIT_DELAY: + mhdr->ddrinitdelay = + (uint16_t) strtoul (token, tempptr, 16); + printf("DDR init delay = %d msec\n", + mhdr->ddrinitdelay); + break; + case CMD_DDR_DATA: + exthdr->rcfg[datacmd_cnt].rdata = + (uint32_t) strtoul (token, tempptr, 16); + + if (datacmd_cnt > KWBIMAGE_MAX_CONFIG ) { + printf("Err.. found more than max " + "allowed(%d) configurations\n", + KWBIMAGE_MAX_CONFIG); + exit (EXIT_FAILURE); + } else + datacmd_cnt++; + break; + case CMD_INVALID: + default: + printf("Error.. invalid data %s\n",token); + exit (EXIT_FAILURE); + } +} + +void kwdimage_set_ext_header(struct kwb_header *kwbhdr, char* fname) { + bhr_t *mhdr = &kwbhdr->kwb_hdr; + extbhr_t *exthdr = &kwbhdr->kwb_exthdr; + int fd = -1; + int lineno, j; + char *line = NULL; + char * token, *saveptr1, *saveptr2; + size_t len = 0; + enum kwbimage_cmd cmd; + + /* set dram register offset */ + exthdr->dramregsoffs = (uint32_t)&exthdr->rcfg - (uint32_t)mhdr; + + if ((fd = fopen(fname, "r")) == 0) { + if (strlen(fname)) + fprintf (stderr, "Err: Can't open %s: %s\n", + fname, strerror(errno)); + else + fprintf (stderr, "Err: kwbimage.cfg not specified " + "%s\n" + "add -n <file>/<kwbimage.cfg> to the cmd\n", + strerror(errno)); + exit (EXIT_FAILURE); + } + + /* Simple kwimage.cfg file parser */ + lineno=0; + while ((getline(&line, &len, fd)) != -1) { + lineno++; + token = strtok_r(line, "\r\n", &saveptr1); + /* drop all lines with zero tokens (= empty lines) */ + if (token == NULL) + continue; + + for (j = 0, cmd = CMD_INVALID, line = token; ; line = NULL) { + token = strtok_r(line, " ", &saveptr2); + if (token == NULL) + break; + /* Drop all text starting with '#' as comments */ + if (token[0] == '#') + break; + + /* Process rest as valid config command line */ + if (j == 0) { + cmd = kwbimage_check_cfgcmd(token, kwbhdr); + if (cmd == CMD_INVALID) + break; + } else if (j == 1) { + kwbimage_check_cfgdata(token, cmd, kwbhdr); + } else { + /* + * Command format permits only two strings + * on a line, i.e. command and data + * if more than two are observed, then error + * will be reported + */ + printf("Error.. Invalid command line(%d)\n", + lineno); + exit (EXIT_FAILURE); + } + j++; + } + } + if (line) + free(line); + + fclose(fd); +} + +void kwbimage_set_header (struct kwb_header *hdr, struct stat *sbuf, + uint32_t dadr, uint32_t eadr, char *fname) +{ + bhr_t *mhdr = &hdr->kwb_hdr; + extbhr_t *exthdr = &hdr->kwb_exthdr; + + mhdr->blocksize = sbuf->st_size - kwbimage_get_header_size(); + mhdr->srcaddr = kwbimage_get_header_size(); + mhdr->destaddr= dadr; + mhdr->execaddr =eadr; + mhdr->ext = 0x1; /* header extension appended */ + + kwdimage_set_ext_header(hdr, fname); + /* calculate checksums */ + mhdr->checkSum = kwbimage_checksum8((void *)mhdr, sizeof(bhr_t), 0); + exthdr->checkSum = kwbimage_checksum8((void *)exthdr, + sizeof(extbhr_t), 0); +} diff --git a/tools/kwbimage.h b/tools/kwbimage.h new file mode 100644 index 0000000..98ab34f --- /dev/null +++ b/tools/kwbimage.h @@ -0,0 +1,104 @@ +/* + * (C) Copyright 2008 + * Marvell Semiconductor <www.marvell.com> + * iWritten-by: Prafulla Wadaskar prafulla@marvell.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _KWBIMAGE_H_ +#define _KWBIMAGE_H_ + +#include <stdint.h> + +#define KWBIMAGE_MAX_CONFIG ((0x1dc - 0x20)/sizeof(struct reg_config)) +#define MAX_TEMPBUF_LEN 32 + +/* NAND ECC Mode */ +#define IBR_HDR_ECC_DEFAULT 0x00 +#define IBR_HDR_ECC_FORCED_HAMMING 0x01 +#define IBR_HDR_ECC_FORCED_RS 0x02 +#define IBR_HDR_ECC_DISABLED 0x03 + +/* Boot Type - block ID */ +#define IBR_HDR_I2C_ID 0x4D +#define IBR_HDR_SPI_ID 0x5A +#define IBR_HDR_NAND_ID 0x8B +#define IBR_HDR_SATA_ID 0x78 +#define IBR_HDR_PEX_ID 0x9C +#define IBR_HDR_UART_ID 0x69 +#define IBR_DEF_ATTRIB 0x00 + +enum kwbimage_cmd { + CMD_INVALID, + CMD_BOOT_FROM, + CMD_NAND_ECC_MODE, + CMD_NAND_PAGE_SIZE, + CMD_SATA_PIO_MODE, + CMD_DDR_INIT_DELAY, + CMD_DDR_DATA +}; + +/* typedefs */ +typedef struct bhr_t { + uint8_t blockid; /*0 */ + uint8_t nandeccmode; /*1 */ + uint16_t nandpagesize; /*2-3 */ + uint32_t blocksize; /*4-7 */ + uint32_t rsvd1; /*8-11 */ + uint32_t srcaddr; /*12-15 */ + uint32_t destaddr; /*16-19 */ + uint32_t execaddr; /*20-23 */ + uint8_t satapiomode; /*24 */ + uint8_t rsvd3; /*25 */ + uint16_t ddrinitdelay; /*26-27 */ + uint16_t rsvd2; /*28-29 */ + uint8_t ext; /*30 */ + uint8_t checkSum; /*31 */ +} bhr_t, *pbhr_t; + +struct reg_config { + uint32_t raddr; + uint32_t rdata; +}; + +typedef struct extbhr_t { + uint32_t dramregsoffs; + uint8_t rsrvd1[0x20 - sizeof(uint32_t)]; + struct reg_config rcfg[KWBIMAGE_MAX_CONFIG]; + uint8_t rsrvd2[7]; + uint8_t checkSum; +} extbhr_t, *pextbhr_t; + +struct kwb_header { + bhr_t kwb_hdr; + extbhr_t kwb_exthdr; +}; + +/* + * functions + */ +uint8_t kwbimage_checksum8(void *start, uint32_t len, uint8_t csum); +uint32_t kwbimage_checksum32(uint32_t *start, uint32_t len, uint32_t csum); +void *kwbimage_get_header_ptr(void); +int kwbimage_get_header_size (void); +void kwbimage_set_header (struct kwb_header *hdr, struct stat *sbuf, + uint32_t dadr, uint32_t eadr, char *fname); + +#endif /* _KWBIMAGE_H_ */ diff --git a/tools/mkimage.c b/tools/mkimage.c index 40363a9..ba71874 100644 --- a/tools/mkimage.c +++ b/tools/mkimage.c @@ -24,6 +24,7 @@
#include "mkimage.h" #include <image.h> +#include "kwbimage.h"
extern int errno;
@@ -164,6 +165,10 @@ NXTARG: ; (lflag && (dflag || fflag))) usage();
+ if (((argc != 1) && (opt_type == IH_TYPE_KWBIMAGE)) && + (xflag || lflag)) + usage(); + if (!eflag) { ep = addr; /* If XIP, entry point must be after the U-Boot header */ @@ -251,7 +256,12 @@ NXTARG: ; * * write dummy header, to be fixed later */ - hdr_size = image_get_header_size (); + if (opt_type == IH_TYPE_KWBIMAGE) { + hdr = kwbimage_get_header_ptr(); + hdr_size = kwbimage_get_header_size (); + } else + hdr_size = image_get_header_size (); + memset (hdr, 0, hdr_size); if (write(ifd, hdr, hdr_size) != hdr_size) { fprintf (stderr, "%s: Write error on %s: %s\n", @@ -339,6 +349,19 @@ NXTARG: ;
hdr = (image_header_t *)ptr;
+ /* Build new header */ + if (opt_type == IH_TYPE_KWBIMAGE) { + checksum = kwbimage_checksum32((uint32_t *)ptr, sbuf.st_size, 0); + + if (write(ifd, &checksum, sizeof(uint32_t)) + != sizeof(uint32_t)) { + fprintf (stderr, "%s: Checksum wr err on %s: %s\n", + cmdname, imagefile, strerror(errno)); + exit (EXIT_FAILURE); + } + sbuf.st_size += sizeof(uint32_t); + kwbimage_set_header (hdr, &sbuf, addr, ep, name); + } else { checksum = crc32 (0, (const char *)(ptr + hdr_size), sbuf.st_size - hdr_size); @@ -361,6 +384,7 @@ NXTARG: ;
image_print_contents (hdr);
+ } (void) munmap((void *)ptr, sbuf.st_size);
/* We're a bit of paranoid */