Still having trouble finding exactly what is causing it. See below for my include/configs/jornada.h file.
diff --git a/include/configs/jornada.h b/include/configs/jornada.h new file mode 100644 index 0000000..270b54f --- /dev/null +++ b/include/configs/jornada.h @@ -0,0 +1,166 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger mgroeger@sysgo.de + * + * 2004 (c) MontaVista Software, Inc. + * + * Configuation settings for the Intel Assabet board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_SA1110 1 /* This is an SA1100 CPU */ +#define CONFIG_JORNADA700 1 /* on an HP Jornada 700 */ + +#undef CONFIG_USE_IRQ +/* we will never enable dcache, because we have to setup MMU first */ +#define CONFIG_SYS_NO_DCACHE + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size rsrvd for initial data */ + +/* + * select serial console configuration + */ +#define CONFIG_SA1100_SERIAL +#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on HP Jornada */ +#define CONFIG_SERIAL3 1 /* needed? */ + +/* allow to overwrite serial and ethaddr */ +//#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 59600 + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +//#define CONFIG_CMD_DHCP + + +/* + * BOOTP options + */ +//#define CONFIG_BOOTP_SUBNETMASK +//#define CONFIG_BOOTP_GATEWAY +//#define CONFIG_BOOTP_HOSTNAME +//#define CONFIG_BOOTP_BOOTPATH + +#define CONFIG_BOOTDELAY 10 +#define CONFIG_BOOTARGS "console=ttySA0,115200n8" +#define CONFIG_BOOTCOMMAND "bootp;tftp;bootm" +//#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */ + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 59600 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "HP Jornada # " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */ + +#define CONFIG_SYS_LOAD_ADDR 0xc0000000 /* default load address */ + +#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */ +#define CONFIG_SYS_CPUSPEED 0x0a /* set core clock to 206MHz */ + + /* valid baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */ +#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ + +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ +#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ +#define PHYS_FLASH_BANK_SIZE 0x01000000 /* 16 MB Banks */ +#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ + +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 KB for Monitor */ + +#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_RAMSTART +#endif + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_FLASH_SIZE PHYS_FLASH_SIZE +#define CONFIG_SYS_FLASH_CFI 1 /* flash is CFI conformant */ +#define CONFIG_FLASH_CFI_DRIVER 1 /* use common cfi driver */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max # of memory banks */ +#define CONFIG_SYS_FLASH_INCREMENT 0 /* there is only one bank */ +#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max # of sectors on one chip */ +#undef CONFIG_SYS_FLASH_PROTECTION +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } + +#define CONFIG_ENV_IS_IN_FLASH 1 + +#if defined(CONFIG_ENV_IS_IN_FLASH) +#define CONFIG_ENV_IN_OWN_SECTOR 1 +#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + PHYS_FLASH_SECT_SIZE) +#define CONFIG_ENV_SIZE PHYS_FLASH_SECT_SIZE +#define CONFIG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE +#endif + +#endif /* __CONFIG_H */
On Wed, 02 Sep 2009 23:37:47 +0200 Wolfgang Denk wd@denx.de wrote:
Dear Kristoffer Ericson,
In message 20090902233329.a9b77e68.kristoffer.ericson@gmail.com you wrote:
Greetings,
Trying to get my Flashrom working (previously used blob with it). I get this now : c -Map u-boot.map -o u-boot net/libnet.a(net.o)(.text+0x1cc): In function `ArpRequest': /home/kristoffer/work/projects/u-boot.git/net/net.c:250: undefined reference to `eth_send'
...
My device shouldnt be using those at all so its no wonder that they are undefined, but the question is how I should get rid of those messages.
Don't enable network support in your board configuration? I. e. remove all command selections that require Ethenret to work...
Best regards,
Wolfgang Denk
-- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de Substitute "damn" every time you're inclined to write "very"; your editor will delete it and the writing will be just as it should be. - Mark Twain