Re: [U-Boot] [PATCH v7 4/4] Kirkwood: add lschlv2 and lsxhl board support

Hi Michael,

On Thu, May 31, 2012 at 08:12:45PM +0200, Michael Walle wrote:

...

+#ifdef CONFIG_RESET_PHY_R +/* Configure and enable MV88E1118 PHY */ +void reset_phy(void) +{

• u16 devadr;
• char *name = "egiga1";
• if (miiphy_set_current_dev(name))

• return;
  

• /* command to read PHY dev address */
• if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) {

• printf("Err..%s could not read PHY dev address\n", __func__);
  

• return;
  

• }
• /* reset the phy */
• miiphy_reset(name, devadr);

+} +#endif /* CONFIG_RESET_PHY_R */

Can you please test without this part if your network will work?

Regards, Luka