[U-Boot] [PATCH 0/4] add drive strenght and slew rate support for SAM9X60

From: Claudiu Beznea claudiu.beznea@microchip.com

Hi,

This series adds support for drive strength and slew rate support for Microchip SAMX60's pin controller. For drive strenght we could have 2 values: low, high. For slew rate we could have 2 values: enable, disabled.

Thank you, Claudiu Beznea

Claudiu Beznea (4): pinctrl: at91: add option to use drive strength bits pinctrl: at91: add drive strength support for SAM9X60 pinctrl: at91: add compatibles for SAM9X60 pin controller pinctrl: at91: add slewrate support for SAM9X60

drivers/pinctrl/pinctrl-at91.c | 84 +++++++++++++++++++++++++++++++++++--- include/dt-bindings/pinctrl/at91.h | 4 ++ 2 files changed, 83 insertions(+), 5 deletions(-)