Hi Rick,
Should we put all the init code into cpu/at91rm9200/{start.S} and use CONFIG_ and CFG_?
I'd put it all in start.S and not define any CONFIG for it.
Hmm. But my boards has a completly different clocking scheme! For instance: I use an 16MHz external clock oszillator. The eval board has an 18,xxx MHz crystal... So we need at least some CFG_'s for clock configuration.
Ok?
No.
I have completely different crystals than the AT91RM9200DK. Do you want me to put my clock settings in u-boot? How about the 500 different AT91RM9200 boards that get designed this year? Do you want their specific stuff in u-boot?
By necessity u-boot is already nearing #ifdef hell because it supports so many devel boards (which is good). If we all threw our specific board design stuff in there, I don't think anyone in their right mind would use u-boot.
Just my opinion ;-) Maybe Wolfgang disagrees.
Rick
-- Steven Scholz
imc Measurement & Control imc Meßsysteme GmbH Voltastr. 5 Voltastr. 5 13355 Berlin 13355 Berlin Germany Deutschland fon: +49 30 467090-0 Tel: 030 / 467090-0 fax: +49 30 4631576 fax: 030 / 4631576