On Thu, Jul 26, 2018 at 12:35 PM, Icenowy Zheng icenowy@aosc.io wrote:
于 2018年7月26日 GMT+08:00 下午3:02:50, Jagan Teki jagan@amarulasolutions.com 写到:
On Sat, Jul 21, 2018 at 1:50 PM, Icenowy Zheng icenowy@aosc.io wrote:
This patchset trys to add support for Allwinner H6 SoC to U-Boot.
Allwinner H6 is a quite new Allwinner SoC, with several parts changed
a
lot (memory map, DRAM controller, CCU, so on). The position which SPL will be loaded (SRAM A1) also changed to 0x20000.
The Pine H64 board support comes with this patchset, as this is the first H6 board that I can get (being early bird).
Icenowy Zheng (13): sunxi: change SUNXI_HIGH_SRAM option to SUNXI_SRAM_ADDRESS sunxi: add basic memory map definitions of H6 SoC sunxi: change RMR64's RVBAR address for H6 sunxi: change ATF position for H6 sunxi: add config for SPL at 0x20000 on H6 sunxi: change GIC address on H6 sunxi: add clock code for H6 sunxi: use sun6i-style watchdog for H6 sunxi: add UART0 setup for H6 sunxi: add MMC support for H6 sunxi: add DRAM support to H6 sunxi: add support for Allwinner H6 SoC sunxi: add support for Pine H64 board
Reviewed-by: Jagan Teki jagan@openedev.com
Observing SPL hang during relocation switch to board_init_r with orangepi board[1], will pine boot? look like both seem similar LPDDR3 configs atleast from schematics.
Use v2.1 DRAM patch.
Thanks.
Tested-by: Jagan Teki jagan@openedev.com