Hi Jaehoon,
Please find my response below.
Thanks & Regards Amarendra Reddy
On 12 April 2013 16:50, Jaehoon Chung jh80.chung@samsung.com wrote:
On 04/10/2013 03:13 PM, Amarendra Reddy wrote:
Hi Jaehoon,
Please find my responses below.
Thanks & Regards Amarendra Reddy
On 9 April 2013 16:23, Jaehoon Chung jh80.chung@samsung.com wrote:
On 04/03/2013 11:08 PM, Amar wrote:
This patch adds FDT support for DWMMC, by reading the DWMMC node data from the device tree and initialising DWMMC channels as per data obtained from the node.
Signed-off-by: Vivek Gautam gautam.vivek@samsung.com Signed-off-by: Amar amarendra.xt@samsung.com Acked-by: Simon Glass sjg@chromium.org
Changes since V1: 1)Updated code to have same signature for the function exynos_dwmci_init() for both FDT and non-FDT versions. 2)Updated code to pass device_id parameter to the function exynos5_mmc_set_clk_div() instead of index. 3)Updated code to decode the value of "samsung,width" from FDT. 4)Channel index is computed instead of getting from FDT.
Changes since V2: 1)Updation of commit message and resubmition of proper patch set.
Changes since V3: 1)Replaced the new function exynos5_mmc_set_clk_div() with the existing function set_mmc_clk(). set_mmc_clk() will do the
purpose.
2)Computation of FSYS block clock divisor (pre-ratio) is added.Changes since V4: 1)Replaced "unsigned int exynos_dwmmc_init(int index, int
bus_width)" with
int exynos_dwmci_add_port(int, u32, inth, u32) i)exynos_dwmmc_add_port() will be used by non-FDT boards. ii)In FDT case, exynos_dwmmc_init(const void *blob) willuse
exynos_dwmmc_add_port() for every channel enabled indevice node.
2)Changed the computation method of mmc clock divisor. 3)Updated exynos_dwmmc_init() to compute the 'clksel_val' withinthe function.
Changes since V5: 1)Updated in response to review comments and changed the mmc
clock
value
from 50MHz to 52MHz.Changes since V6: No change.
Changes since V7: No change.
arch/arm/include/asm/arch-exynos/dwmmc.h | 11 +-- drivers/mmc/exynos_dw_mmc.c | 127
++++++++++++++++++++++++++++---
include/dwmmc.h | 3 + 3 files changed, 124 insertions(+), 17 deletions(-)
diff --git a/arch/arm/include/asm/arch-exynos/dwmmc.h
b/arch/arm/include/asm/arch-exynos/dwmmc.h
index 8acdf9b..3b147b8 100644 --- a/arch/arm/include/asm/arch-exynos/dwmmc.h +++ b/arch/arm/include/asm/arch-exynos/dwmmc.h @@ -27,10 +27,7 @@ #define DWMCI_SET_DRV_CLK(x) ((x) << 16) #define DWMCI_SET_DIV_RATIO(x) ((x) << 24)
-int exynos_dwmci_init(u32 regbase, int bus_width, int index);
-static inline unsigned int exynos_dwmmc_init(int index, int bus_width) -{
unsigned int base = samsung_get_base_mmc() + (0x10000 * index);return exynos_dwmci_init(base, bus_width, index);-} +#ifdef CONFIG_OF_CONTROL +int exynos_dwmmc_init(const void *blob); +#endif +int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32
clksel);
diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c index 72a31b7..4238dd9 100644 --- a/drivers/mmc/exynos_dw_mmc.c +++ b/drivers/mmc/exynos_dw_mmc.c @@ -19,39 +19,146 @@ */
#include <common.h> -#include <malloc.h> #include <dwmmc.h> +#include <fdtdec.h> +#include <libfdt.h> +#include <malloc.h> #include <asm/arch/dwmmc.h> #include <asm/arch/clk.h> +#include <asm/arch/pinmux.h>
-static char *EXYNOS_NAME = "EXYNOS DWMMC"; +#define DWMMC_MAX_CH_NUM 4 +#define DWMMC_MAX_FREQ 52000000 +#define DWMMC_MIN_FREQ 400000 +#define DWMMC_MMC0_CLKSEL_VAL 0x03030001 +#define DWMMC_MMC2_CLKSEL_VAL 0x03020001
I known that CLKSEL's value is SoC specific. All exynos series are working fine? I didn't think so.
Best Regards, Jaehoon Chung
The above values of CLKSEL work fine for Exynos5 (5250 & 5410) and is tested.
The above CLKSEL values donot hold good for Exynos4 series. Exynos4 has "Mobile Storage Host" with only one port. But this file 'drivers/mmc/exynos_dw_mmc.c' is specific to Exynos5 series and gets compiled only when CONFIG_EXYNOS_DWMMC is defined.
No, driver/mmc/exynos_dw_mmc.c isn't specific to Exynos5 series. We can use this controller at the exynos4. Then we need to consider how get the clksel value according to SoC.
Best Regards, Jaehoon Chung
OK. Then I shall add the macro for supporting exynos4 also as shown below #define EXYNOS4_DWMMC_MMC0_CLKSEL_VAL 0x00000000 (reset value) #define EXYNOS5_DWMMC_MMC0_CLKSEL_VAL 0x03030001 #define EXYNOS5_DWMMC_MMC2_CLKSEL_VAL 0x03020001
In Exynos4, Mobile Storage Host has only one channel.
The the below function will be updated as below int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel) { ...... ......
if (clksel) { host->clksel_val = clksel; } else { if (0 == index) { if(cpu_is_exynos5()) host->clksel_val = EXYNOS5_DWMMC_MMC0_CLKSEL_VAL; else host->clksel_val = EXYNOS4_DWMMC_MMC0_CLKSEL_VAL; /* Exynos4 MSH has only one channel */
}
if (2 == index) host->clksel_val = EXYNOS5_DWMMC_MMC2_CLKSEL_VAL; } ........ ........ }
Is it OK. Please comment on the above.
Thanks & Regards Amarendra Reddy
+/*
- Function used as callback function to initialise the
- CLKSEL register for every mmc channel.
- */
static void exynos_dwmci_clksel(struct dwmci_host *host) {
u32 val;val = DWMCI_SET_SAMPLE_CLK(DWMCI_SHIFT_0) |DWMCI_SET_DRV_CLK(DWMCI_SHIFT_0) |DWMCI_SET_DIV_RATIO(0);
dwmci_writel(host, DWMCI_CLKSEL, host->clksel_val);+}
dwmci_writel(host, DWMCI_CLKSEL, val);+unsigned int exynos_dwmci_get_clk(int dev_index) +{
return get_mmc_clk(dev_index);}
-int exynos_dwmci_init(u32 regbase, int bus_width, int index) +/*
- This function adds the mmc channel to be registered with mmc core.
- index - mmc channel number.
- regbase - register base address of mmc channel specified in
'index'.
- bus_width - operating bus width of mmc channel specified in
'index'.
- clksel - value to be written into CLKSEL register in case of FDT.
NULL in case od non-FDT.- */
+int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32
clksel)
{ struct dwmci_host *host = NULL;
unsigned int div;unsigned long freq, sclk; host = malloc(sizeof(struct dwmci_host)); if (!host) { printf("dwmci_host malloc fail!\n"); return 1; }/* request mmc clock vlaue of 52MHz. */freq = 52000000;sclk = get_mmc_clk(index);div = DIV_ROUND_UP(sclk, freq);/* set the clock divisor for mmc */set_mmc_clk(index, div);
host->name = EXYNOS_NAME;
host->name = "EXYNOS DWMMC"; host->ioaddr = (void *)regbase; host->buswidth = bus_width;if (clksel) {host->clksel_val = clksel;} else {if (0 == index)host->clksel_val = DWMMC_MMC0_CLKSEL_VAL;if (2 == index)host->clksel_val = DWMMC_MMC2_CLKSEL_VAL;}host->clksel = exynos_dwmci_clksel; host->dev_index = index;host->mmc_clk = exynos_dwmci_get_clk;/* Add the mmc channel to be registered with mmc core */if (add_dwmci(host, DWMMC_MAX_FREQ, DWMMC_MIN_FREQ)) {debug("dwmmc%d registration failed\n", index);return -1;}return 0;+}
+#ifdef CONFIG_OF_CONTROL +int exynos_dwmmc_init(const void *blob) +{
int index, bus_width;int node_list[DWMMC_MAX_CH_NUM];int err = 0, dev_id, flag, count, i;u32 clksel_val, base, timing[3];count = fdtdec_find_aliases_for_id(blob, "mmc",COMPAT_SAMSUNG_EXYNOS5_DWMMC, node_list,DWMMC_MAX_CH_NUM);for (i = 0; i < count; i++) {int node = node_list[i];if (node <= 0)continue;
add_dwmci(host, 52000000, 400000);
/* Extract device id for each mmc channel */dev_id = pinmux_decode_periph_id(blob, node);/* Get the bus width from the device node */bus_width = fdtdec_get_int(blob, node,"samsung,bus-width", 0);
if (bus_width <= 0) {debug("DWMMC: Can't get bus-width\n");return -1;}if (8 == bus_width)flag = PINMUX_FLAG_8BIT_MODE;elseflag = PINMUX_FLAG_NONE;/* config pinmux for each mmc channel */err = exynos_pinmux_config(dev_id, flag);if (err) {debug("DWMMC not configured\n");return err;}index = dev_id - PERIPH_ID_SDMMC0;/* Get the base address from the device node */base = fdtdec_get_addr(blob, node, "reg");if (!base) {debug("DWMMC: Can't get base address\n");return -1;}/* Extract the timing info from the node */err = fdtdec_get_int_array(blob, node, "samsung,timing",timing, 3);if (err) {debug("Can't get sdr-timings for divider\n");return -1;}clksel_val = (DWMCI_SET_SAMPLE_CLK(timing[0]) |DWMCI_SET_DRV_CLK(timing[1]) |DWMCI_SET_DIV_RATIO(timing[2]));/* Initialise each mmc channel */err = exynos_dwmci_add_port(index, base, bus_width,clksel_val);
if (err)debug("dwmmc Channel-%d init failed\n", index);} return 0;}
+#endif diff --git a/include/dwmmc.h b/include/dwmmc.h index c8b1d40..e142f3e 100644 --- a/include/dwmmc.h +++ b/include/dwmmc.h @@ -123,6 +123,8 @@ #define MSIZE(x) ((x) << 28) #define RX_WMARK(x) ((x) << 16) #define TX_WMARK(x) (x) +#define RX_WMARK_SHIFT 16 +#define RX_WMARK_MASK (0xfff << RX_WMARK_SHIFT)
#define DWMCI_IDMAC_OWN (1 << 31) #define DWMCI_IDMAC_CH (1 << 4) @@ -144,6 +146,7 @@ struct dwmci_host { unsigned int bus_hz; int dev_index; int buswidth;
u32 clksel_val; u32 fifoth_val; struct mmc *mmc;
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot