Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagnioj@jcrosoft.com --- include/linux/list.h | 506 +++++++++++++++++++++++++++++++++++++++++++----- include/linux/poison.h | 13 ++ 2 files changed, 474 insertions(+), 45 deletions(-) create mode 100644 include/linux/poison.h
diff --git a/include/linux/list.h b/include/linux/list.h index e6492f7..aeeeb21 100644 --- a/include/linux/list.h +++ b/include/linux/list.h @@ -1,6 +1,9 @@ #ifndef _LINUX_LIST_H #define _LINUX_LIST_H
+#include <linux/stddef.h> +#include <linux/poison.h> + #ifndef ARCH_HAS_PREFETCH #define ARCH_HAS_PREFETCH static inline void prefetch(const void *x) {;} @@ -25,9 +28,11 @@ struct list_head { #define LIST_HEAD(name) \ struct list_head name = LIST_HEAD_INIT(name)
-#define INIT_LIST_HEAD(ptr) do { \ - (ptr)->next = (ptr); (ptr)->prev = (ptr); \ -} while (0) +static inline void INIT_LIST_HEAD(struct list_head *list) +{ + list->next = list; + list->prev = list; +}
/* * Insert a new entry between two known consecutive entries. @@ -87,13 +92,37 @@ static inline void __list_del(struct list_head *prev, struct list_head *next) /** * list_del - deletes entry from list. * @entry: the element to delete from the list. - * Note: list_empty on entry does not return true after this, the entry is in an undefined state. + * Note: list_empty() on entry does not return true after this, the entry is + * in an undefined state. */ static inline void list_del(struct list_head *entry) { __list_del(entry->prev, entry->next); - entry->next = (void *) 0; - entry->prev = (void *) 0; + entry->next = LIST_POISON1; + entry->prev = LIST_POISON2; +} + +/** + * list_replace - replace old entry by new one + * @old : the element to be replaced + * @new : the new element to insert + * + * If @old was empty, it will be overwritten. + */ +static inline void list_replace(struct list_head *old, + struct list_head *new) +{ + new->next = old->next; + new->next->prev = new; + new->prev = old->prev; + new->prev->next = new; +} + +static inline void list_replace_init(struct list_head *old, + struct list_head *new) +{ + list_replace(old, new); + INIT_LIST_HEAD(old); }
/** @@ -130,37 +159,129 @@ static inline void list_move_tail(struct list_head *list, }
/** + * list_is_last - tests whether @list is the last entry in list @head + * @list: the entry to test + * @head: the head of the list + */ +static inline int list_is_last(const struct list_head *list, + const struct list_head *head) +{ + return list->next == head; +} + +/** * list_empty - tests whether a list is empty * @head: the list to test. */ -static inline int list_empty(struct list_head *head) +static inline int list_empty(const struct list_head *head) { return head->next == head; }
-static inline void __list_splice(struct list_head *list, - struct list_head *head) +/** + * list_empty_careful - tests whether a list is empty and not being modified + * @head: the list to test + * + * Description: + * tests whether a list is empty _and_ checks that no other CPU might be + * in the process of modifying either member (next or prev) + * + * NOTE: using list_empty_careful() without synchronization + * can only be safe if the only activity that can happen + * to the list entry is list_del_init(). Eg. it cannot be used + * if another CPU could re-list_add() it. + */ +static inline int list_empty_careful(const struct list_head *head) +{ + struct list_head *next = head->next; + return (next == head) && (next == head->prev); +} + +/** + * list_is_singular - tests whether a list has just one entry. + * @head: the list to test. + */ +static inline int list_is_singular(const struct list_head *head) +{ + return !list_empty(head) && (head->next == head->prev); +} + +static inline void __list_cut_position(struct list_head *list, + struct list_head *head, struct list_head *entry) +{ + struct list_head *new_first = entry->next; + list->next = head->next; + list->next->prev = list; + list->prev = entry; + entry->next = list; + head->next = new_first; + new_first->prev = head; +} + +/** + * list_cut_position - cut a list into two + * @list: a new list to add all removed entries + * @head: a list with entries + * @entry: an entry within head, could be the head itself + * and if so we won't cut the list + * + * This helper moves the initial part of @head, up to and + * including @entry, from @head to @list. You should + * pass on @entry an element you know is on @head. @list + * should be an empty list or a list you do not care about + * losing its data. + * + */ +static inline void list_cut_position(struct list_head *list, + struct list_head *head, struct list_head *entry) +{ + if (list_empty(head)) + return; + if (list_is_singular(head) && + (head->next != entry && head != entry)) + return; + if (entry == head) + INIT_LIST_HEAD(list); + else + __list_cut_position(list, head, entry); +} + +static inline void __list_splice(const struct list_head *list, + struct list_head *prev, + struct list_head *next) { struct list_head *first = list->next; struct list_head *last = list->prev; - struct list_head *at = head->next;
- first->prev = head; - head->next = first; + first->prev = prev; + prev->next = first;
- last->next = at; - at->prev = last; + last->next = next; + next->prev = last; }
/** - * list_splice - join two lists + * list_splice - join two lists, this is designed for stacks * @list: the new list to add. * @head: the place to add it in the first list. */ -static inline void list_splice(struct list_head *list, struct list_head *head) +static inline void list_splice(const struct list_head *list, + struct list_head *head) { if (!list_empty(list)) - __list_splice(list, head); + __list_splice(list, head, head->next); +} + +/** + * list_splice_tail - join two lists, each list being a queue + * @list: the new list to add. + * @head: the place to add it in the first list. + */ +static inline void list_splice_tail(struct list_head *list, + struct list_head *head) +{ + if (!list_empty(list)) + __list_splice(list, head->prev, head); }
/** @@ -174,7 +295,24 @@ static inline void list_splice_init(struct list_head *list, struct list_head *head) { if (!list_empty(list)) { - __list_splice(list, head); + __list_splice(list, head, head->next); + INIT_LIST_HEAD(list); + } +} + +/** + * list_splice_tail_init - join two lists and reinitialise the emptied list + * @list: the new list to add. + * @head: the place to add it in the first list. + * + * Each of the lists is a queue. + * The list at @list is reinitialised + */ +static inline void list_splice_tail_init(struct list_head *list, + struct list_head *head) +{ + if (!list_empty(list)) { + __list_splice(list, head->prev, head); INIT_LIST_HEAD(list); } } @@ -186,28 +324,53 @@ static inline void list_splice_init(struct list_head *list, * @member: the name of the list_struct within the struct. */ #define list_entry(ptr, type, member) \ - ((type *)((char *)(ptr)-(unsigned long)(&((type *)0)->member))) + container_of(ptr, type, member) + +/** + * list_first_entry - get the first element from a list + * @ptr: the list head to take the element from. + * @type: the type of the struct this is embedded in. + * @member: the name of the list_struct within the struct. + * + * Note, that list is expected to be not empty. + */ +#define list_first_entry(ptr, type, member) \ + list_entry((ptr)->next, type, member)
/** * list_for_each - iterate over a list - * @pos: the &struct list_head to use as a loop counter. + * @pos: the &struct list_head to use as a loop cursor. * @head: the head for your list. */ #define list_for_each(pos, head) \ - for (pos = (head)->next, prefetch(pos->next); pos != (head); \ - pos = pos->next, prefetch(pos->next)) + for (pos = (head)->next; prefetch(pos->next), pos != (head); \ + pos = pos->next) + +/** + * __list_for_each - iterate over a list + * @pos: the &struct list_head to use as a loop cursor. + * @head: the head for your list. + * + * This variant differs from list_for_each() in that it's the + * simplest possible list iteration code, no prefetching is done. + * Use this for code that knows the list to be very short (empty + * or 1 entry) most of the time. + */ +#define __list_for_each(pos, head) \ + for (pos = (head)->next; pos != (head); pos = pos->next) + /** * list_for_each_prev - iterate over a list backwards - * @pos: the &struct list_head to use as a loop counter. + * @pos: the &struct list_head to use as a loop cursor. * @head: the head for your list. */ #define list_for_each_prev(pos, head) \ - for (pos = (head)->prev, prefetch(pos->prev); pos != (head); \ - pos = pos->prev, prefetch(pos->prev)) + for (pos = (head)->prev; prefetch(pos->prev), pos != (head); \ + pos = pos->prev)
/** - * list_for_each_safe - iterate over a list safe against removal of list entry - * @pos: the &struct list_head to use as a loop counter. + * list_for_each_safe - iterate over a list safe against removal of list entry + * @pos: the &struct list_head to use as a loop cursor. * @n: another &struct list_head to use as temporary storage * @head: the head for your list. */ @@ -216,43 +379,296 @@ static inline void list_splice_init(struct list_head *list, pos = n, n = pos->next)
/** + * list_for_each_prev_safe - iterate over a list backwards safe against removal of list entry + * @pos: the &struct list_head to use as a loop cursor. + * @n: another &struct list_head to use as temporary storage + * @head: the head for your list. + */ +#define list_for_each_prev_safe(pos, n, head) \ + for (pos = (head)->prev, n = pos->prev; \ + prefetch(pos->prev), pos != (head); \ + pos = n, n = pos->prev) + +/** * list_for_each_entry - iterate over list of given type - * @pos: the type * to use as a loop counter. + * @pos: the type * to use as a loop cursor. * @head: the head for your list. * @member: the name of the list_struct within the struct. */ #define list_for_each_entry(pos, head, member) \ - for (pos = list_entry((head)->next, typeof(*pos), member), \ - prefetch(pos->member.next); \ - &pos->member != (head); \ - pos = list_entry(pos->member.next, typeof(*pos), member), \ - prefetch(pos->member.next)) + for (pos = list_entry((head)->next, typeof(*pos), member); \ + prefetch(pos->member.next), &pos->member != (head); \ + pos = list_entry(pos->member.next, typeof(*pos), member)) + +/** + * list_for_each_entry_reverse - iterate backwards over list of given type. + * @pos: the type * to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + */ +#define list_for_each_entry_reverse(pos, head, member) \ + for (pos = list_entry((head)->prev, typeof(*pos), member); \ + prefetch(pos->member.prev), &pos->member != (head); \ + pos = list_entry(pos->member.prev, typeof(*pos), member)) + +/** + * list_prepare_entry - prepare a pos entry for use in list_for_each_entry_continue() + * @pos: the type * to use as a start point + * @head: the head of the list + * @member: the name of the list_struct within the struct. + * + * Prepares a pos entry for use as a start point in list_for_each_entry_continue(). + */ +#define list_prepare_entry(pos, head, member) \ + ((pos) ? : list_entry(head, typeof(*pos), member)) + +/** + * list_for_each_entry_continue - continue iteration over list of given type + * @pos: the type * to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + * + * Continue to iterate over list of given type, continuing after + * the current position. + */ +#define list_for_each_entry_continue(pos, head, member) \ + for (pos = list_entry(pos->member.next, typeof(*pos), member); \ + prefetch(pos->member.next), &pos->member != (head); \ + pos = list_entry(pos->member.next, typeof(*pos), member)) + +/** + * list_for_each_entry_continue_reverse - iterate backwards from the given point + * @pos: the type * to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + * + * Start to iterate over list of given type backwards, continuing after + * the current position. + */ +#define list_for_each_entry_continue_reverse(pos, head, member) \ + for (pos = list_entry(pos->member.prev, typeof(*pos), member); \ + prefetch(pos->member.prev), &pos->member != (head); \ + pos = list_entry(pos->member.prev, typeof(*pos), member)) + +/** + * list_for_each_entry_from - iterate over list of given type from the current point + * @pos: the type * to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + * + * Iterate over list of given type, continuing from current position. + */ +#define list_for_each_entry_from(pos, head, member) \ + for (; prefetch(pos->member.next), &pos->member != (head); \ + pos = list_entry(pos->member.next, typeof(*pos), member))
/** * list_for_each_entry_safe - iterate over list of given type safe against removal of list entry - * @pos: the type * to use as a loop counter. + * @pos: the type * to use as a loop cursor. * @n: another type * to use as temporary storage * @head: the head for your list. * @member: the name of the list_struct within the struct. */ #define list_for_each_entry_safe(pos, n, head, member) \ for (pos = list_entry((head)->next, typeof(*pos), member), \ - n = list_entry(pos->member.next, typeof(*pos), member); \ - &pos->member != (head); \ + n = list_entry(pos->member.next, typeof(*pos), member); \ + &pos->member != (head); \ pos = n, n = list_entry(n->member.next, typeof(*n), member))
/** - * list_for_each_entry_continue - iterate over list of given type - * continuing after existing point - * @pos: the type * to use as a loop counter. + * list_for_each_entry_safe_continue + * @pos: the type * to use as a loop cursor. + * @n: another type * to use as temporary storage * @head: the head for your list. * @member: the name of the list_struct within the struct. + * + * Iterate over list of given type, continuing after current point, + * safe against removal of list entry. + */ +#define list_for_each_entry_safe_continue(pos, n, head, member) \ + for (pos = list_entry(pos->member.next, typeof(*pos), member), \ + n = list_entry(pos->member.next, typeof(*pos), member); \ + &pos->member != (head); \ + pos = n, n = list_entry(n->member.next, typeof(*n), member)) + +/** + * list_for_each_entry_safe_from + * @pos: the type * to use as a loop cursor. + * @n: another type * to use as temporary storage + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + * + * Iterate over list of given type from current point, safe against + * removal of list entry. + */ +#define list_for_each_entry_safe_from(pos, n, head, member) \ + for (n = list_entry(pos->member.next, typeof(*pos), member); \ + &pos->member != (head); \ + pos = n, n = list_entry(n->member.next, typeof(*n), member)) + +/** + * list_for_each_entry_safe_reverse + * @pos: the type * to use as a loop cursor. + * @n: another type * to use as temporary storage + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + * + * Iterate backwards over list of given type, safe against removal + * of list entry. + */ +#define list_for_each_entry_safe_reverse(pos, n, head, member) \ + for (pos = list_entry((head)->prev, typeof(*pos), member), \ + n = list_entry(pos->member.prev, typeof(*pos), member); \ + &pos->member != (head); \ + pos = n, n = list_entry(n->member.prev, typeof(*n), member)) + +/* + * Double linked lists with a single pointer list head. + * Mostly useful for hash tables where the two pointer list head is + * too wasteful. + * You lose the ability to access the tail in O(1). + */ + +struct hlist_head { + struct hlist_node *first; +}; + +struct hlist_node { + struct hlist_node *next, **pprev; +}; + +#define HLIST_HEAD_INIT { .first = NULL } +#define HLIST_HEAD(name) struct hlist_head name = { .first = NULL } +#define INIT_HLIST_HEAD(ptr) ((ptr)->first = NULL) +static inline void INIT_HLIST_NODE(struct hlist_node *h) +{ + h->next = NULL; + h->pprev = NULL; +} + +static inline int hlist_unhashed(const struct hlist_node *h) +{ + return !h->pprev; +} + +static inline int hlist_empty(const struct hlist_head *h) +{ + return !h->first; +} + +static inline void __hlist_del(struct hlist_node *n) +{ + struct hlist_node *next = n->next; + struct hlist_node **pprev = n->pprev; + *pprev = next; + if (next) + next->pprev = pprev; +} + +static inline void hlist_del(struct hlist_node *n) +{ + __hlist_del(n); + n->next = LIST_POISON1; + n->pprev = LIST_POISON2; +} + +static inline void hlist_del_init(struct hlist_node *n) +{ + if (!hlist_unhashed(n)) { + __hlist_del(n); + INIT_HLIST_NODE(n); + } +} + +static inline void hlist_add_head(struct hlist_node *n, struct hlist_head *h) +{ + struct hlist_node *first = h->first; + n->next = first; + if (first) + first->pprev = &n->next; + h->first = n; + n->pprev = &h->first; +} + +/* next must be != NULL */ +static inline void hlist_add_before(struct hlist_node *n, + struct hlist_node *next) +{ + n->pprev = next->pprev; + n->next = next; + next->pprev = &n->next; + *(n->pprev) = n; +} + +static inline void hlist_add_after(struct hlist_node *n, + struct hlist_node *next) +{ + next->next = n->next; + n->next = next; + next->pprev = &n->next; + + if(next->next) + next->next->pprev = &next->next; +} + +#define hlist_entry(ptr, type, member) container_of(ptr,type,member) + +#define hlist_for_each(pos, head) \ + for (pos = (head)->first; pos && ({ prefetch(pos->next); 1; }); \ + pos = pos->next) + +#define hlist_for_each_safe(pos, n, head) \ + for (pos = (head)->first; pos && ({ n = pos->next; 1; }); \ + pos = n) + +/** + * hlist_for_each_entry - iterate over list of given type + * @tpos: the type * to use as a loop cursor. + * @pos: the &struct hlist_node to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the hlist_node within the struct. + */ +#define hlist_for_each_entry(tpos, pos, head, member) \ + for (pos = (head)->first; \ + pos && ({ prefetch(pos->next); 1;}) && \ + ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \ + pos = pos->next) + +/** + * hlist_for_each_entry_continue - iterate over a hlist continuing after current point + * @tpos: the type * to use as a loop cursor. + * @pos: the &struct hlist_node to use as a loop cursor. + * @member: the name of the hlist_node within the struct. + */ +#define hlist_for_each_entry_continue(tpos, pos, member) \ + for (pos = (pos)->next; \ + pos && ({ prefetch(pos->next); 1;}) && \ + ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \ + pos = pos->next) + +/** + * hlist_for_each_entry_from - iterate over a hlist continuing from current point + * @tpos: the type * to use as a loop cursor. + * @pos: the &struct hlist_node to use as a loop cursor. + * @member: the name of the hlist_node within the struct. + */ +#define hlist_for_each_entry_from(tpos, pos, member) \ + for (; pos && ({ prefetch(pos->next); 1;}) && \ + ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \ + pos = pos->next) + +/** + * hlist_for_each_entry_safe - iterate over list of given type safe against removal of list entry + * @tpos: the type * to use as a loop cursor. + * @pos: the &struct hlist_node to use as a loop cursor. + * @n: another &struct hlist_node to use as temporary storage + * @head: the head for your list. + * @member: the name of the hlist_node within the struct. */ -#define list_for_each_entry_continue(pos, head, member) \ - for (pos = list_entry(pos->member.next, typeof(*pos), member), \ - prefetch(pos->member.next); \ - &pos->member != (head); \ - pos = list_entry(pos->member.next, typeof(*pos), member), \ - prefetch(pos->member.next)) +#define hlist_for_each_entry_safe(tpos, pos, n, head, member) \ + for (pos = (head)->first; \ + pos && ({ n = pos->next; 1; }) && \ + ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \ + pos = n)
#endif diff --git a/include/linux/poison.h b/include/linux/poison.h new file mode 100644 index 0000000..ba7ff84 --- /dev/null +++ b/include/linux/poison.h @@ -0,0 +1,13 @@ +#ifndef _LINUX_POISON_H +#define _LINUX_POISON_H + +/********** include/linux/list.h **********/ +/* + * These are non-NULL pointers that will result in page faults + * under normal circumstances, used to verify that nobody uses + * non-initialized list entries. + */ +#define LIST_POISON1 ((void *) 0x00100100) +#define LIST_POISON2 ((void *) 0x00200200) + +#endif