Provide a static Kconfig value for the target FPGA archtitecture, as it is done in Linux. The cpu-uclass driver will cross-check it with the value read from PVR10 register.
Signed-off-by: Ovidiu Panait ovpanait@gmail.com ---
Changes in v2: - New patch.
board/xilinx/microblaze-generic/Kconfig | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/board/xilinx/microblaze-generic/Kconfig b/board/xilinx/microblaze-generic/Kconfig index a6743cadf4..90f79cfb94 100644 --- a/board/xilinx/microblaze-generic/Kconfig +++ b/board/xilinx/microblaze-generic/Kconfig @@ -38,6 +38,14 @@ config XILINX_MICROBLAZE0_HW_VER string "Core version number" default "7.10.d"
+config XILINX_MICROBLAZE0_FPGA_FAMILY + string "Targeted FPGA family" + default "virtex5" + help + This option contains info about the target FPGA architecture + (Zynq-7000, UltraScale+ Kintex, etc) that the MicroBlaze soft core is + implemented on. It corresponds to the C_FAMILY hdl parameter. + config XILINX_MICROBLAZE0_USR_EXCEP bool "MicroBlaze user exception support" default y