Hi, I work with a FADS823 board. I use u-boot as my bootloader,I downloaded the ppc kernel from Montavista using rsync. I compiled my kernel with minimal configurations .It boots and works well on board. Now that I am trying to add more features like Ethernet support etc etc.. I understand that in our board (FADS823) the Ethernet is on SCC2.When I configure my kernel for the same in CPM iOptions, it gives me the following error,
/*********************************************************************************************************************************************************/ make[2]: Entering directory `/home/rupesh/PPC-Installs/RSYNC/Montavista/linux/arch/ppc/8xx_io' ppc-linux-gcc -D__KERNEL__ -I/home/rupesh/PPC-Installs/RSYNC/Montavista/linux/include -I/usr/lib/gcc-lib/ppc-linux/2.95.4/include/ -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer -I/home/rupesh/PPC-Installs/RSYNC/Montavista/linux/arch/ppc -fsigned-char -msoft-float -pipe -ffixed-r2 -Wno-uninitialized -mmultiple -mstring -mcpu=860 -nostdinc -iwithprefix include -DKBUILD_BASENAME=enet -c -o enet.o enet.c enet.c:699: #error Exactly ONE pair of PA_ENET_[RT]XD, PB_ENET_[RT]XD must be defined enet.c:904: #error Configuration Error: define exactly ONE of PB_ENET_TENA, PC_ENET_TENA enet.c: In function `scc_enet_init': enet.c:713: `PC_ENET_CLSN' undeclared (first use in this function) enet.c:713: (Each undeclared identifier is reported only once enet.c:713: for each function it appears in.) enet.c:713: `PC_ENET_RENA' undeclared (first use in this function) enet.c:719: `PA_ENET_TCLK' undeclared (first use in this function) enet.c:719: `PA_ENET_RCLK' undeclared (first use in this function) enet.c:725: `SICR_ENET_MASK' undeclared (first use in this function) enet.c:726: `SICR_ENET_CLKRT' undeclared (first use in this function) enet.c:929: `PB_ENET_TENA' undeclared (first use in this function) make[2]: *** [enet.o] Error 1 make[2]: Leaving directory `/home/rupesh/PPC-Installs/RSYNC/Montavista/linux/arch/ppc/8xx_io' make[1]: *** [first_rule] Error 2 make[1]: Leaving directory `/home/rupesh/PPC-Installs/RSYNC/Montavista/linux/arch/ppc/8xx_io' make: *** [_dir_arch/ppc/8xx_io] Error 2
/*********************************************************************************************************************************************************/
When I see the comproc.h file, these Macros arn't defined for FADS Board.. Any clues ?
Note: The Ethernet hardware work very fine with u-boot, using which I do my tftpboot .
Rupesh