Hi Stefano,
Subject: Re: [PATCH v2 5/5] board: toradex: add colibri imx8qxp 2gb wb it v1.0b module support
Hi Marcel,
On 25/04/19 14:35, Marcel Ziswiler wrote:
Hi Stefano
On Thu, 2019-04-25 at 12:48 +0200, Stefano Babic wrote:
Hi Marcel,
On 09/04/19 17:25, Marcel Ziswiler wrote:
From: Marcel Ziswiler marcel.ziswiler@toradex.com
This commit adds initial support for the Toradex Colibri iMX8QXP 2GB WB IT V1.0B module. Unlike the V1.0A early access samples exclusively booting from SD card, they are now strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U- Boot supports either booting from the on-module eMMC or
may
be used for recovery purpose using the universal update utility (uuu) aka mfgtools 3.0.
Functionality wise the following is known to be working:
- eMMC and MMC/SD card
- Ethernet
- GPIOs
- I2C
Unfortunately, there is no USB functionality for the i.MX 8QXP as of yet.
Signed-off-by: Marcel Ziswiler marcel.ziswiler@toradex.com
I merged the series and build locally (fine), but Travis complains and stops with error:
+cc1: fatal error: opening output file spl/u-boot-spl.cfgout: No such file or directory +compilation terminated.
Can you take a look at it ?
Sure, looks like Peng's commit caceb739ea07 ("imx: build flash.bin for i.MX8") takes SPL for granted while my patchset currently avoids it.
It looks so, yes.
BTW: I still don't believe SPL makes much sense on i.MX 8X given all the other proprietary parts involved in booting.
SPL makes more sense if it is possible to detect at runtime the HW and change the configuration - for i.MX6, this means RAMS detection, which boot device is booting, and so on.
On i.MX8 there is a lot of proprietary parts - we lose the flexibility of SPL, and most features are lost (or must be provided by proprietary code). I agree that on this platform SPL makes less sense, and i.MX8 should be built independently if CONFIG_SPL is set (this is also for i.MX6 / MX5, there are boards without SPL and using the DCD image to set up the RAM controller).
The reason we move to use SPL on i.MX8 is that we would like to avoid bind ATF/OP-TEE/U-Boot into a flat image with hacked offset in an image.
So the bootflow now is SPL->ATF->OPTEE->ATF->U-Boot
Without SPL, when generating flash.bin, we have to hack ATF to copy OP-TEE image from flash.bin to the runtime location.
Plus currently SPL actually breaks the USB serial downloader aka recovery mode using the universal update utility (uuu) aka mfgtools 3.0.
The usb related function for i.MX8 is not ready now. we are almost run out of ocram with SPL DM, thinking to use OF_PLATDATA now, then move to usb functions.
Thanks, Peng.
Regards, Stefano
--
======= DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de ============================================================== =======