From: Nandor Han nandor.han@ge.com
Move the VPD reading earlier in order to establish the monitor type as soon as possible.
The configuration of the specific environment variables needs to be done later after the environment is configured.
Signed-off-by: Nandor Han nandor.han@ge.com Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.co.uk --- board/ge/bx50v3/bx50v3.c | 36 +++++++++++++++++++++++++++++------- 1 file changed, 29 insertions(+), 7 deletions(-)
diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c index 3c8689682141..c988043a137f 100644 --- a/board/ge/bx50v3/bx50v3.c +++ b/board/ge/bx50v3/bx50v3.c @@ -34,6 +34,11 @@ #include "../../../drivers/net/e1000.h" DECLARE_GLOBAL_DATA_PTR;
+struct vpd_cache; + +static int confidx = 3; /* Default to b850v3. */ +static struct vpd_cache vpd; + #ifndef CONFIG_SYS_I2C_EEPROM_ADDR # define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 @@ -620,7 +625,6 @@ static void process_vpd(struct vpd_cache *vpd)
static int read_vpd(uint eeprom_bus) { - struct vpd_cache vpd; int res; int size = 1024; uint8_t *data; @@ -640,7 +644,6 @@ static int read_vpd(uint eeprom_bus) if (res == 0) { memset(&vpd, 0, sizeof(vpd)); vpd_reader(size, data, &vpd, vpd_callback); - process_vpd(&vpd); }
free(data); @@ -690,8 +693,31 @@ int board_early_init_f(void) return 0; }
+static void set_confidx(const struct vpd_cache* vpd) +{ + switch (vpd->product_id) { + case VPD_PRODUCT_B450: + confidx = 1; + break; + case VPD_PRODUCT_B650: + confidx = 2; + break; + case VPD_PRODUCT_B850: + confidx = 3; + break; + } +} + int board_init(void) { + setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); + setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); + setup_i2c(3, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3); + + read_vpd(CONFIG_SYS_I2C_EEPROM_BUS); + + set_confidx(&vpd); + gpio_direction_output(SUS_S3_OUT, 1); gpio_direction_output(WIFI_EN, 1); #if defined(CONFIG_VIDEO_IPUV3) @@ -706,10 +732,6 @@ int board_init(void) #ifdef CONFIG_MXC_SPI setup_spi(); #endif - setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); - setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); - setup_i2c(3, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3); - return 0; }
@@ -775,7 +797,7 @@ void pmic_init(void)
int board_late_init(void) { - read_vpd(CONFIG_SYS_I2C_EEPROM_BUS); + process_vpd(&vpd);
#ifdef CONFIG_CMD_BMODE add_board_boot_modes(board_boot_modes);