Hi, Przemyslaw.
On 09/30/2015 08:14 PM, Przemyslaw Marczak wrote:
This device uses SDHCI driver, for eMMC and SD cards. Trying bind the DW MMC driver with fdt node without all required properties, causes printing an error.
This commit disables the DW MMC node.
Why does it need? Trats board doesn't support the Designware IP, so i think right that it shouldn't build.
If needs to modify, exynos-common.h should be modified.
Tested-on: Trats
Signed-off-by: Przemyslaw Marczak p.marczak@samsung.com Cc: Łukasz Majewski l.majewski@samsung.com Cc: Minkyu Kang mk7.kang@samsung.com -- Changes V3:
- new commit
arch/arm/dts/exynos4210-trats.dts | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/arch/arm/dts/exynos4210-trats.dts b/arch/arm/dts/exynos4210-trats.dts index 36d02df..f3fac80 100644 --- a/arch/arm/dts/exynos4210-trats.dts +++ b/arch/arm/dts/exynos4210-trats.dts @@ -117,4 +117,8 @@ sdhci@12540000 { status = "disabled"; };
- dwmmc@12550000 {
status = "disabled";- };
It seems to support dwmmc controller. 12550000 addr is for sdhci controller.
Best Regards, Jaehoon Chung
};