Hi Tom,
On Mon, Oct 2, 2017 at 4:32 PM, Tom Rini trini@konsulko.com wrote:
FWIW, on cubox the current status is looping, and your kludge I just get no output :( But there may be some other problems here too as I'm
Just tried it on 2017.11-rc1 plus the attached hack and it boots fine:
U-Boot SPL 2017.11-rc1-dirty (Oct 02 2017 - 21:27:10) Trying to boot from MMC1
U-Boot 2017.11-rc1-dirty (Oct 02 2017 - 21:27:10 -0300)
CPU: Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 26C Reset cause: POR Board: MX6 Cubox-i DRAM: 2 GiB MMC: FSL_SDHC: 0 No panel detected: default to HDMI Display: HDMI (1024x768) In: serial Out: serial Err: serial Net: FEC Hit any key to stop autoboot: 0 =>