On Mon, Aug 05, 2013 at 04:00:34PM +0200, Heiko Schocher wrote:
add the am1808 based ipam390 board from Barix.
- 128MByte, DDR2, synchronous RAM 16bit databus to SDRAM interface
- 128MByte, NAND Flash, 8bit databus to the NANDFlash Interface
- Ethernet PHY Micrel KSZ8051R via RMII
- Console on UART 0
- booting fron nand flash
- spl falcon bootmode
Needed patches posted on the ML but not yet in mainline:
- [U-Boot,05/10] arm: spl: For Falcon Mode, set a default machid of ~0 http://patchwork.ozlabs.org/patch/264336/
applies on git://git.denx.de/u-boot-ti.git master last commit:
commit 500a0daeecf36b72797c53ef78d9ad096a464d32 Author: Dan Murphy dmurphy@ti.com Date: Thu Jul 11 13:10:27 2013 -0500 gpio: tca642x: Add the tca642x gpio expander driver
I am on vacation for two weeks, so I maybe not able to respond immediately but as the merge window closes soon, I post this board support now ...
Heiko Schocher (4): arm/davinci/da850: add uart0_pins_rtscts and RMII_MHz_50_CLK in emac_pins_rmii pinmux bootstage: get more BOOTSTAGE_ID* in show_boot_progress() arm, da850: enable the correct uart in arch_cpu_init() arm, da850: add ipam390 board support
MAINTAINERS | 1 + arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 4 + arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c | 6 + arch/arm/include/asm/arch-davinci/pinmux_defs.h | 3 +- board/Barix/ipam390/Makefile | 29 ++ board/Barix/ipam390/README.ipam390 | 229 ++++++++++++++++ board/Barix/ipam390/ipam390-ais-uart.cfg | 202 ++++++++++++++ board/Barix/ipam390/ipam390.c | 348 ++++++++++++++++++++++++ board/Barix/ipam390/u-boot-spl-ipam390.lds | 53 ++++ boards.cfg | 1 + include/bootstage.h | 1 + include/configs/ipam390.h | 331 ++++++++++++++++++++++ 12 Dateien ge??ndert, 1207 Zeilen hinzugef??gt(+), 1 Zeile entfernt(-) create mode 100644 board/Barix/ipam390/Makefile create mode 100644 board/Barix/ipam390/README.ipam390 create mode 100644 board/Barix/ipam390/ipam390-ais-uart.cfg create mode 100644 board/Barix/ipam390/ipam390.c create mode 100644 board/Barix/ipam390/u-boot-spl-ipam390.lds create mode 100644 include/configs/ipam390.h
Applied to u-boot-ti/master, thanks.