[U-Boot] Whose responsibility is it to enable FPU?

I built u-boot for a 440EPx board derived from the sequoia configuration.

I am using an FPU-enabled gcc cross compiler.

U-Boot runs fine and successfully boots my operating system (Linux and uClibc-based root filesystem).

However, I was having a problem running busybox that I traced to errors occurring executing setjmp, which attempts to save floating point registers.

Then I realized that the FPU was not enabled in the MSR or in the ccr0 register.

Have I misconfigured something, or should I go ahead and add code to u-boot to enable the FPU?

Thanks,

Gregg