On Wed, 2015-12-23 at 03:07 +0100, Marek Vasut wrote:
On Wednesday, December 23, 2015 at 03:02:10 AM, ShengjiangWu wrote:
[..]
Hi Marek,
Yes, emac1 and qspi are working now. I'm afraid USB is not working,
=> usb reset resetting USB... USB0: Core Release: 2.93a dwc_otg_core_host_init: Timeout! dwc_otg_core_host_init: Timeout! dwc_otg_core_host_init: Timeout! dwc_otg_core_host_init: Timeout! dwc_otg_core_host_init: Timeout! dwc_otg_core_host_init: Timeout! dwc_otg_core_host_init: Timeout! dwc_otg_core_host_init: Timeout! dwc_otg_core_host_init: Timeout! dwc_otg_core_host_init: Timeout! dwc_otg_core_host_init: Timeout! dwc_otg_core_host_init: Timeout! dwc_otg_core_host_init: Timeout! dwc_otg_core_host_init: Timeout! dwc_otg_core_host_init: Timeout! scanning bus 0 for devices... 1 USB Device(s) found => usb tree USB device tree: 1 Hub (480 Mb/s, 0mA) U-Boot Root Hub
Hm, darn. Can you or Chin check it ? It's either pinmux or wrong USB node in DT in arch/arm/dts/socfpga_cyclone5_socdk.dts .
I am still setting up the SPL into SD card. In the mean time, I believe the error come from pinmux. Shengjiang, can you try out below change?
diff --git a/board/altera/cyclone5-socdk/qts/pinmux_config.h b/board/altera/cyclone5-socdk/qts/pinmux_config.h index 06783dc..fb8648b 100644 --- a/board/altera/cyclone5-socdk/qts/pinmux_config.h +++ b/board/altera/cyclone5-socdk/qts/pinmux_config.h @@ -8,20 +8,20 @@ #define __SOCFPGA_PINMUX_CONFIG_H__
const u8 sys_mgr_init_table[] = { - 3, /* EMACIO0 */ - 3, /* EMACIO1 */ - 3, /* EMACIO2 */ - 3, /* EMACIO3 */ - 3, /* EMACIO4 */ - 3, /* EMACIO5 */ - 3, /* EMACIO6 */ - 3, /* EMACIO7 */ - 3, /* EMACIO8 */ - 3, /* EMACIO9 */ - 3, /* EMACIO10 */ - 3, /* EMACIO11 */ - 3, /* EMACIO12 */ - 3, /* EMACIO13 */ + 0, /* EMACIO0 */ + 2, /* EMACIO1 */ + 2, /* EMACIO2 */ + 2, /* EMACIO3 */ + 2, /* EMACIO4 */ + 2, /* EMACIO5 */ + 2, /* EMACIO6 */ + 2, /* EMACIO7 */ + 2, /* EMACIO8 */ + 0, /* EMACIO9 */ + 2, /* EMACIO10 */ + 2, /* EMACIO11 */ + 2, /* EMACIO12 */ + 2, /* EMACIO13 */ 0, /* EMACIO14 */ 0, /* EMACIO15 */ 0, /* EMACIO16 */
Thanks Chin Liang