Hi Tim,
On 03/04/2014 08:01, Tim Harvey wrote:
Signed-off-by: Tim Harvey tharvey@gateworks.com
arch/arm/cpu/armv7/mx6/u-boot-spl.lds | 52 +++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 arch/arm/cpu/armv7/mx6/u-boot-spl.lds
diff --git a/arch/arm/cpu/armv7/mx6/u-boot-spl.lds b/arch/arm/cpu/armv7/mx6/u-boot-spl.lds new file mode 100644 index 0000000..02aa129 --- /dev/null +++ b/arch/arm/cpu/armv7/mx6/u-boot-spl.lds @@ -0,0 +1,52 @@ +/*
- (C) Copyright 2002
- Gary Jennejohn, DENX Software Engineering, garyj@denx.de
- (C) Copyright 2010
- Texas Instruments, <www.ti.com>
- Aneesh V aneesh@ti.com
- SPDX-License-Identifier: GPL-2.0+
- */
+MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\
LENGTH = CONFIG_SPL_MAX_SIZE }+MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
LENGTH = CONFIG_SPL_BSS_MAX_SIZE }+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{
- .text :
- {
__start = .;arch/arm/cpu/armv7/start.o (.text*)*(.text*)- } >.sram
- . = ALIGN(4);
- .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
- . = ALIGN(4);
- .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
- . = ALIGN(4);
- .u_boot_list : {
KEEP(*(SORT(.u_boot_list*_i2c_*)));- } >.sram
- . = ALIGN(4);
- __image_copy_end = .;
- _end = .;
- .bss :
- {
. = ALIGN(4);__bss_start = .;*(.bss*). = ALIGN(4);__bss_end = .;- } >.sdram
+}
This file is pretty identical to ./arch/arm/cpu/armv7/omap-common/u-boot-spl.lds. I understand that each SOC/arch could be a different set up, but I think we should introduce this diversity when it is needed, not as default.
Maybe can we avoid to copy the file ?
Best regards, Stefano Babic