Rename this function to indicate that it refers to any xPL phase.
Signed-off-by: Simon Glass sjg@chromium.org ---
(no changes since v1)
README | 6 +++--- arch/sandbox/cpu/spl.c | 2 +- arch/sandbox/cpu/start.c | 2 +- arch/x86/cpu/apollolake/cpu_spl.c | 4 ++-- arch/x86/cpu/apollolake/hostbridge.c | 2 +- arch/x86/cpu/apollolake/lpc.c | 2 +- arch/x86/cpu/apollolake/pch.c | 2 +- arch/x86/cpu/apollolake/pmc.c | 4 ++-- arch/x86/cpu/apollolake/punit.c | 2 +- arch/x86/cpu/apollolake/spl.c | 2 +- arch/x86/cpu/broadwell/cpu.c | 2 +- arch/x86/cpu/i386/cpu.c | 2 +- arch/x86/cpu/intel_common/mrc.c | 2 +- arch/x86/cpu/intel_common/p2sb.c | 6 +++--- arch/x86/lib/fsp2/fsp_dram.c | 2 +- arch/x86/lib/fsp2/fsp_init.c | 4 ++-- boot/fdt_simplefb.c | 2 +- boot/vbe_simple_fw.c | 4 ++-- common/board_f.c | 2 +- common/bootstage.c | 2 +- common/spl/spl.c | 6 +++--- doc/develop/spl.rst | 4 ++-- drivers/i2c/designware_i2c_pci.c | 4 ++-- drivers/misc/p2sb-uclass.c | 2 +- drivers/pci/pci-uclass.c | 4 ++-- drivers/pci/pci_rom.c | 4 ++-- drivers/pinctrl/intel/pinctrl.c | 6 +++--- drivers/power/acpi_pmc/acpi-pmc-uclass.c | 2 +- drivers/ram/rockchip/sdram_rk3399.c | 2 +- drivers/spi/ich.c | 4 ++-- drivers/sysreset/sysreset-uclass.c | 2 +- drivers/video/console_truetype.c | 6 +++--- drivers/video/video-uclass.c | 6 +++--- include/spl.h | 10 +++++----- lib/fdtdec.c | 2 +- lib/lmb.c | 4 ++-- lib/time.c | 2 +- 37 files changed, 63 insertions(+), 63 deletions(-)
diff --git a/README b/README index a88e14a0449..54ffbd0975b 100644 --- a/README +++ b/README @@ -1512,7 +1512,7 @@ Low Level (hardware related) configuration options: Set when the currently running compilation is for an artifact that will end up in one of the 'xPL' builds, i.e. SPL, TPL or VPL. Code that needs phase-specific behaviour can check this, - or (where possible) use spl_phase() instead. + or (where possible) use xpl_phase() instead.
Note that CONFIG_XPL_BUILD *is* always defined when either of CONFIG_TPL_BUILD / CONFIG_VPL_BUILD is defined. This can be @@ -1522,13 +1522,13 @@ Low Level (hardware related) configuration options: Set when the currently running compilation is for an artifact that will end up in the TPL build (as opposed to SPL, VPL or U-Boot proper). Code that needs phase-specific behaviour can - check this, or (where possible) use spl_phase() instead. + check this, or (where possible) use xpl_phase() instead.
- CONFIG_VPL_BUILD Set when the currently running compilation is for an artifact that will end up in the VPL build (as opposed to the SPL, TPL or U-Boot proper). Code that needs phase-specific behaviour can - check this, or (where possible) use spl_phase() instead. + check this, or (where possible) use xpl_phase() instead.
- CONFIG_ARCH_MAP_SYSMEM Generally U-Boot (and in particular the md command) uses diff --git a/arch/sandbox/cpu/spl.c b/arch/sandbox/cpu/spl.c index 6c6f4fd8c3e..7497d90fb89 100644 --- a/arch/sandbox/cpu/spl.c +++ b/arch/sandbox/cpu/spl.c @@ -27,7 +27,7 @@ int sandbox_find_next_phase(char *fname, int maxlen, bool use_img) const char *cur_prefix, *next_prefix; int ret;
- cur_prefix = spl_phase_prefix(spl_phase()); + cur_prefix = spl_phase_prefix(xpl_phase()); next_prefix = spl_phase_prefix(spl_next_phase()); ret = os_find_u_boot(fname, maxlen, use_img, cur_prefix, next_prefix); if (ret) diff --git a/arch/sandbox/cpu/start.c b/arch/sandbox/cpu/start.c index ef587ef48b0..81752edc9f8 100644 --- a/arch/sandbox/cpu/start.c +++ b/arch/sandbox/cpu/start.c @@ -206,7 +206,7 @@ static int sandbox_cmdline_cb_test_fdt(struct sandbox_state *state, char *relname; int len;
- if (spl_phase() <= PHASE_SPL) + if (xpl_phase() <= PHASE_SPL) relname = "../arch/sandbox/dts/test.dtb"; else relname = "arch/sandbox/dts/test.dtb"; diff --git a/arch/x86/cpu/apollolake/cpu_spl.c b/arch/x86/cpu/apollolake/cpu_spl.c index 8798fa79d4c..8198667fa50 100644 --- a/arch/x86/cpu/apollolake/cpu_spl.c +++ b/arch/x86/cpu/apollolake/cpu_spl.c @@ -184,9 +184,9 @@ int arch_cpu_init(void) { int ret = 0;
- if (spl_phase() == PHASE_TPL) + if (xpl_phase() == PHASE_TPL) ret = arch_cpu_init_tpl(); - else if (spl_phase() == PHASE_SPL) + else if (xpl_phase() == PHASE_SPL) ret = arch_cpu_init_spl(); if (ret) printf("%s: Error %d\n", __func__, ret); diff --git a/arch/x86/cpu/apollolake/hostbridge.c b/arch/x86/cpu/apollolake/hostbridge.c index 9ee362239ef..039236df02d 100644 --- a/arch/x86/cpu/apollolake/hostbridge.c +++ b/arch/x86/cpu/apollolake/hostbridge.c @@ -255,7 +255,7 @@ static int apl_hostbridge_of_to_plat(struct udevice *dev)
static int apl_hostbridge_probe(struct udevice *dev) { - if (spl_phase() == PHASE_TPL) + if (xpl_phase() == PHASE_TPL) return apl_hostbridge_early_init(dev);
return 0; diff --git a/arch/x86/cpu/apollolake/lpc.c b/arch/x86/cpu/apollolake/lpc.c index 531ff1cd91f..f34c199bf73 100644 --- a/arch/x86/cpu/apollolake/lpc.c +++ b/arch/x86/cpu/apollolake/lpc.c @@ -80,7 +80,7 @@ int lpc_open_pmio_window(uint base, uint size)
lgir_reg_num = find_unused_pmio_window(); if (lgir_reg_num < 0) { - if (spl_phase() > PHASE_TPL) { + if (xpl_phase() > PHASE_TPL) { log_err("LPC: Cannot open IO window: %lx size %lx\n", bridge_base, size - bridged_size); log_err("No more IO windows\n"); diff --git a/arch/x86/cpu/apollolake/pch.c b/arch/x86/cpu/apollolake/pch.c index 32190312ff8..07ef26f6bde 100644 --- a/arch/x86/cpu/apollolake/pch.c +++ b/arch/x86/cpu/apollolake/pch.c @@ -12,7 +12,7 @@
static int apl_set_spi_protect(struct udevice *dev, bool protect) { - if (spl_phase() == PHASE_SPL) + if (xpl_phase() == PHASE_SPL) return lpc_set_spi_protect(dev, BIOS_CTRL, protect);
return 0; diff --git a/arch/x86/cpu/apollolake/pmc.c b/arch/x86/cpu/apollolake/pmc.c index 32fd0344861..bfb8a07d47a 100644 --- a/arch/x86/cpu/apollolake/pmc.c +++ b/arch/x86/cpu/apollolake/pmc.c @@ -115,7 +115,7 @@ int apl_pmc_ofdata_to_uc_plat(struct udevice *dev) ARRAY_SIZE(base)); if (ret) return log_msg_ret("Missing/short early-regs", ret); - if (spl_phase() == PHASE_TPL) { + if (xpl_phase() == PHASE_TPL) { upriv->pmc_bar0 = (void *)base[0]; upriv->pmc_bar2 = (void *)base[2];
@@ -186,7 +186,7 @@ static int enable_pmcbar(struct udevice *dev)
static int apl_pmc_probe(struct udevice *dev) { - if (spl_phase() == PHASE_TPL) { + if (xpl_phase() == PHASE_TPL) { return enable_pmcbar(dev); } else { struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev); diff --git a/arch/x86/cpu/apollolake/punit.c b/arch/x86/cpu/apollolake/punit.c index b1503c25140..9c708e9df55 100644 --- a/arch/x86/cpu/apollolake/punit.c +++ b/arch/x86/cpu/apollolake/punit.c @@ -77,7 +77,7 @@ static int punit_init(struct udevice *dev)
static int apl_punit_probe(struct udevice *dev) { - if (spl_phase() == PHASE_SPL) + if (xpl_phase() == PHASE_SPL) return punit_init(dev);
return 0; diff --git a/arch/x86/cpu/apollolake/spl.c b/arch/x86/cpu/apollolake/spl.c index b351d73e7d8..510f8c4350f 100644 --- a/arch/x86/cpu/apollolake/spl.c +++ b/arch/x86/cpu/apollolake/spl.c @@ -116,7 +116,7 @@ static int spl_fast_spi_load_image(struct spl_image_info *spl_image, return ret;
spl_image->size = CONFIG_SYS_MONITOR_LEN; /* We don't know SPL size */ - spl_image->entry_point = spl_phase() == PHASE_TPL ? + spl_image->entry_point = xpl_phase() == PHASE_TPL ? CONFIG_SPL_TEXT_BASE : CONFIG_TEXT_BASE; spl_image->load_addr = spl_image->entry_point; spl_image->os = IH_OS_U_BOOT; diff --git a/arch/x86/cpu/broadwell/cpu.c b/arch/x86/cpu/broadwell/cpu.c index dc6717eca40..87463748c4d 100644 --- a/arch/x86/cpu/broadwell/cpu.c +++ b/arch/x86/cpu/broadwell/cpu.c @@ -68,7 +68,7 @@ int arch_cpu_init(void) post_code(POST_CPU_INIT);
/* Do a mini-init if TPL has already done the full init */ - if (IS_ENABLED(CONFIG_TPL) && spl_phase() != PHASE_TPL) + if (IS_ENABLED(CONFIG_TPL) && xpl_phase() != PHASE_TPL) return x86_cpu_reinit_f(); else return x86_cpu_init_f(); diff --git a/arch/x86/cpu/i386/cpu.c b/arch/x86/cpu/i386/cpu.c index 934e98ac582..d837fb97982 100644 --- a/arch/x86/cpu/i386/cpu.c +++ b/arch/x86/cpu/i386/cpu.c @@ -271,7 +271,7 @@ static void identify_cpu(struct cpu_device_id *cpu) * Do a quick and dirty check to save space - Intel and AMD only and * just the vendor. This is enough for most TPL code. */ - if (spl_phase() == PHASE_TPL) { + if (xpl_phase() == PHASE_TPL) { struct cpuid_result result;
result = cpuid(0x00000000); diff --git a/arch/x86/cpu/intel_common/mrc.c b/arch/x86/cpu/intel_common/mrc.c index c834c05d130..baa1f0e32d6 100644 --- a/arch/x86/cpu/intel_common/mrc.c +++ b/arch/x86/cpu/intel_common/mrc.c @@ -259,7 +259,7 @@ int mrc_common_init(struct udevice *dev, void *pei_data, bool use_asm_linkage) return ret;
delay = dev_read_u32_default(dev, "fspm,training-delay", 0); - if (spl_phase() == PHASE_SPL) { + if (xpl_phase() == PHASE_SPL) { if (delay) printf("SDRAM training (%d seconds)...", delay); else diff --git a/arch/x86/cpu/intel_common/p2sb.c b/arch/x86/cpu/intel_common/p2sb.c index 7aad8f8ca56..406c41013fc 100644 --- a/arch/x86/cpu/intel_common/p2sb.c +++ b/arch/x86/cpu/intel_common/p2sb.c @@ -96,7 +96,7 @@ int p2sb_of_to_plat(struct udevice *dev) return log_msg_ret("Missing/short early-regs", ret); plat->mmio_base = base[0]; /* TPL sets up the initial BAR */ - if (spl_phase() == PHASE_TPL) { + if (xpl_phase() == PHASE_TPL) { plat->bdf = pci_get_devfn(dev); if (plat->bdf < 0) return log_msg_ret("Cannot get p2sb PCI address", @@ -114,9 +114,9 @@ int p2sb_of_to_plat(struct udevice *dev)
static int p2sb_probe(struct udevice *dev) { - if (spl_phase() == PHASE_TPL) + if (xpl_phase() == PHASE_TPL) return p2sb_early_init(dev); - else if (spl_phase() == PHASE_SPL) + else if (xpl_phase() == PHASE_SPL) return p2sb_spl_init(dev);
return 0; diff --git a/arch/x86/lib/fsp2/fsp_dram.c b/arch/x86/lib/fsp2/fsp_dram.c index a50dc985a3c..4c4c8334bdb 100644 --- a/arch/x86/lib/fsp2/fsp_dram.c +++ b/arch/x86/lib/fsp2/fsp_dram.c @@ -28,7 +28,7 @@ int dram_init(void)
return 0; } - if (spl_phase() == PHASE_SPL) { + if (xpl_phase() == PHASE_SPL) { bool s3wake = false;
s3wake = IS_ENABLED(CONFIG_HAVE_ACPI_RESUME) && diff --git a/arch/x86/lib/fsp2/fsp_init.c b/arch/x86/lib/fsp2/fsp_init.c index ecbadaae75c..1a2bf46c5c5 100644 --- a/arch/x86/lib/fsp2/fsp_init.c +++ b/arch/x86/lib/fsp2/fsp_init.c @@ -25,7 +25,7 @@ int fsp_setup_pinctrl(void) int ret;
/* Make sure pads are set up early in U-Boot */ - if (!ll_boot_init() || spl_phase() != PHASE_BOARD_F) + if (!ll_boot_init() || xpl_phase() != PHASE_BOARD_F) return 0;
/* Probe all pinctrl devices to set up the pads */ @@ -134,7 +134,7 @@ int fsp_locate_fsp(enum fsp_type_t type, struct binman_entry *entry, return log_msg_ret("Could not get flash mmap", ret); }
- if (spl_phase() >= PHASE_BOARD_F) { + if (xpl_phase() >= PHASE_BOARD_F) { if (type != FSP_S) return -EPROTONOSUPPORT; ret = binman_entry_find("intel-fsp-s", entry); diff --git a/boot/fdt_simplefb.c b/boot/fdt_simplefb.c index 53415548459..71b833eb9bd 100644 --- a/boot/fdt_simplefb.c +++ b/boot/fdt_simplefb.c @@ -27,7 +27,7 @@ static int fdt_simplefb_configure_node(void *blob, int off) struct udevice *dev; int ret;
- if (IS_ENABLED(CONFIG_SPL_VIDEO_HANDOFF) && spl_phase() > PHASE_SPL) { + if (IS_ENABLED(CONFIG_SPL_VIDEO_HANDOFF) && xpl_phase() > PHASE_SPL) { struct video_handoff *ho;
ho = bloblist_find(BLOBLISTT_U_BOOT_VIDEO, sizeof(*ho)); diff --git a/boot/vbe_simple_fw.c b/boot/vbe_simple_fw.c index 4d6da9490a7..da9701f9eb9 100644 --- a/boot/vbe_simple_fw.c +++ b/boot/vbe_simple_fw.c @@ -157,7 +157,7 @@ static int simple_load_from_image(struct spl_image_info *spl_image, struct vbe_handoff *handoff; int ret;
- if (spl_phase() != PHASE_VPL && spl_phase() != PHASE_SPL) + if (xpl_phase() != PHASE_VPL && xpl_phase() != PHASE_SPL) return -ENOENT;
ret = bloblist_ensure_size(BLOBLISTT_VBE, sizeof(struct vbe_handoff), @@ -197,7 +197,7 @@ static int simple_load_from_image(struct spl_image_info *spl_image, bootflow_free(&bflow);
/* Record that VBE was used in this phase */ - handoff->phases |= 1 << spl_phase(); + handoff->phases |= 1 << xpl_phase();
return 0; } diff --git a/common/board_f.c b/common/board_f.c index 154675d0e40..f1bd70fdd6c 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -397,7 +397,7 @@ __weak int arch_reserve_mmu(void)
static int reserve_video_from_videoblob(void) { - if (IS_ENABLED(CONFIG_SPL_VIDEO_HANDOFF) && spl_phase() > PHASE_SPL) { + if (IS_ENABLED(CONFIG_SPL_VIDEO_HANDOFF) && xpl_phase() > PHASE_SPL) { struct video_handoff *ho; int ret = 0;
diff --git a/common/bootstage.c b/common/bootstage.c index 72d80ee9fe5..dd6aed7c2fd 100644 --- a/common/bootstage.c +++ b/common/bootstage.c @@ -489,7 +489,7 @@ int bootstage_unstash(const void *base, int size) for (rec = data->record + data->next_id, i = 0; i < hdr->count; i++, rec++) { rec->name = ptr; - if (spl_phase() == PHASE_SPL) + if (xpl_phase() == PHASE_SPL) rec->name = strdup(ptr);
/* Assume no data corruption here */ diff --git a/common/spl/spl.c b/common/spl/spl.c index 81b3501ebaf..a0de495e529 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -441,7 +441,7 @@ static inline int write_spl_handoff(void) { return 0; } */ static enum bootstage_id get_bootstage_id(bool start) { - enum xpl_phase_t phase = spl_phase(); + enum xpl_phase_t phase = xpl_phase();
if (IS_ENABLED(CONFIG_TPL_BUILD) && phase == PHASE_TPL) return start ? BOOTSTAGE_ID_START_TPL : BOOTSTAGE_ID_END_TPL; @@ -476,7 +476,7 @@ static int spl_common_init(bool setup_malloc) log_debug("Failed to unstash bootstage: ret=%d\n", ret); } bootstage_mark_name(get_bootstage_id(true), - spl_phase_name(spl_phase())); + spl_phase_name(xpl_phase())); #if CONFIG_IS_ENABLED(LOG) ret = log_init(); if (ret) { @@ -493,7 +493,7 @@ static int spl_common_init(bool setup_malloc) } if (CONFIG_IS_ENABLED(DM)) { bootstage_start(BOOTSTAGE_ID_ACCUM_DM_SPL, - spl_phase() == PHASE_TPL ? "dm tpl" : "dm_spl"); + xpl_phase() == PHASE_TPL ? "dm tpl" : "dm_spl"); /* With CONFIG_SPL_OF_PLATDATA, bring in all devices */ ret = dm_init_and_scan(!CONFIG_IS_ENABLED(OF_PLATDATA)); bootstage_accum(BOOTSTAGE_ID_ACCUM_DM_SPL); diff --git a/doc/develop/spl.rst b/doc/develop/spl.rst index fba4a439d3a..aa6d28fa333 100644 --- a/doc/develop/spl.rst +++ b/doc/develop/spl.rst @@ -35,7 +35,7 @@ For example:: if (IS_ENABLED(CONFIG_XPL_BUILD)) foo();
- if (spl_phase() == PHASE_TPL) + if (xpl_phase() == PHASE_TPL) bar();
The building of xPL images can be enabled by CONFIG_SPL (etc.) options in @@ -121,7 +121,7 @@ Further usages of U-Boot SPL comprise: Checking the boot phase -----------------------
-Use `spl_phase()` to find the current U-Boot phase, e.g. `PHASE_SPL`. You can +Use `xpl_phase()` to find the current U-Boot phase, e.g. `PHASE_SPL`. You can also find the previous and next phase and get the phase name.
diff --git a/drivers/i2c/designware_i2c_pci.c b/drivers/i2c/designware_i2c_pci.c index 11c98672265..c21c412231c 100644 --- a/drivers/i2c/designware_i2c_pci.c +++ b/drivers/i2c/designware_i2c_pci.c @@ -37,7 +37,7 @@ static int designware_i2c_pci_of_to_plat(struct udevice *dev) { struct dw_i2c *priv = dev_get_priv(dev);
- if (spl_phase() < PHASE_SPL) { + if (xpl_phase() < PHASE_SPL) { u32 base; int ret;
@@ -53,7 +53,7 @@ static int designware_i2c_pci_of_to_plat(struct udevice *dev) PCI_COMMAND_MASTER); }
- if (spl_phase() < PHASE_BOARD_F) { + if (xpl_phase() < PHASE_BOARD_F) { /* Handle early, fixed mapping into a different address space */ priv->regs = (struct i2c_regs *)dm_pci_read_bar32(dev, 0); } else { diff --git a/drivers/misc/p2sb-uclass.c b/drivers/misc/p2sb-uclass.c index 016c8073378..d7ce0383ac9 100644 --- a/drivers/misc/p2sb-uclass.c +++ b/drivers/misc/p2sb-uclass.c @@ -198,7 +198,7 @@ static int p2sb_child_post_bind(struct udevice *dev)
static int p2sb_post_bind(struct udevice *dev) { - if (spl_phase() > PHASE_TPL && !CONFIG_IS_ENABLED(OF_PLATDATA)) + if (xpl_phase() > PHASE_TPL && !CONFIG_IS_ENABLED(OF_PLATDATA)) return dm_scan_fdt_dev(dev);
return 0; diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c index 6571e653049..59894d2430b 100644 --- a/drivers/pci/pci-uclass.c +++ b/drivers/pci/pci-uclass.c @@ -722,7 +722,7 @@ static bool pci_need_device_pre_reloc(struct udevice *bus, uint vendor, u32 vendev; int index;
- if (spl_phase() == PHASE_SPL && CONFIG_IS_ENABLED(PCI_PNP)) + if (xpl_phase() == PHASE_SPL && CONFIG_IS_ENABLED(PCI_PNP)) return true;
for (index = 0; @@ -798,7 +798,7 @@ static int pci_find_and_bind_driver(struct udevice *parent, if (!(gd->flags & GD_FLG_RELOC) && !(drv->flags & DM_FLAG_PRE_RELOC) && (!CONFIG_IS_ENABLED(PCI_PNP) || - spl_phase() != PHASE_SPL)) + xpl_phase() != PHASE_SPL)) return log_msg_ret("pre", -EPERM);
/* diff --git a/drivers/pci/pci_rom.c b/drivers/pci/pci_rom.c index 78e5de937cd..2753df275ca 100644 --- a/drivers/pci/pci_rom.c +++ b/drivers/pci/pci_rom.c @@ -379,7 +379,7 @@ int vesa_setup_video(struct udevice *dev, int (*int15_handler)(void)) }
/* In U-Boot proper, collect the information added by SPL (see below) */ - if (IS_ENABLED(CONFIG_SPL_VIDEO) && spl_phase() > PHASE_SPL && + if (IS_ENABLED(CONFIG_SPL_VIDEO) && xpl_phase() > PHASE_SPL && CONFIG_IS_ENABLED(BLOBLIST)) { struct video_handoff *ho;
@@ -425,7 +425,7 @@ int vesa_setup_video(struct udevice *dev, int (*int15_handler)(void)) mode_info.vesa.bits_per_pixel);
/* In SPL, store the information for use by U-Boot proper */ - if (spl_phase() == PHASE_SPL && CONFIG_IS_ENABLED(BLOBLIST)) { + if (xpl_phase() == PHASE_SPL && CONFIG_IS_ENABLED(BLOBLIST)) { struct video_handoff *ho;
ho = bloblist_add(BLOBLISTT_U_BOOT_VIDEO, sizeof(*ho), 0); diff --git a/drivers/pinctrl/intel/pinctrl.c b/drivers/pinctrl/intel/pinctrl.c index 6cfe83a593a..19525f82a22 100644 --- a/drivers/pinctrl/intel/pinctrl.c +++ b/drivers/pinctrl/intel/pinctrl.c @@ -273,7 +273,7 @@ static int pinctrl_configure_itss(struct udevice *dev, irq = pcr_read32(dev, PAD_CFG1_OFFSET(pad_cfg_offset)); irq &= PAD_CFG1_IRQ_MASK; if (!irq) { - if (spl_phase() > PHASE_TPL) + if (xpl_phase() > PHASE_TPL) log_err("GPIO %u doesn't support APIC routing\n", cfg->pad);
@@ -315,7 +315,7 @@ static int pinctrl_pad_reset_config_override(const struct pad_community *comm, return config_value; } } - if (spl_phase() > PHASE_TPL) + if (xpl_phase() > PHASE_TPL) log_err("Logical-to-Chipset mapping not found\n");
return -ENOENT; @@ -622,7 +622,7 @@ int intel_pinctrl_of_to_plat(struct udevice *dev, struct intel_pinctrl_priv *priv = dev_get_priv(dev);
if (!comm) { - if (spl_phase() > PHASE_TPL) + if (xpl_phase() > PHASE_TPL) log_err("Cannot find community for pid %d\n", pplat->pid); return -EDOM; diff --git a/drivers/power/acpi_pmc/acpi-pmc-uclass.c b/drivers/power/acpi_pmc/acpi-pmc-uclass.c index c289cede15b..1e94104091e 100644 --- a/drivers/power/acpi_pmc/acpi-pmc-uclass.c +++ b/drivers/power/acpi_pmc/acpi-pmc-uclass.c @@ -60,7 +60,7 @@ int pmc_gpe_init(struct udevice *dev) * are different and if they aren't, use the reset values. */ if (dw[0] == dw[1] || dw[1] == dw[2]) { - if (spl_phase() > PHASE_TPL) + if (xpl_phase() > PHASE_TPL) log_info("PMC: Using default GPE route"); gpio_cfg = readl(upriv->gpe_cfg); for (i = 0; i < upriv->gpe0_count; i++) diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c index c3745f9445b..7b48af49af8 100644 --- a/drivers/ram/rockchip/sdram_rk3399.c +++ b/drivers/ram/rockchip/sdram_rk3399.c @@ -193,7 +193,7 @@ struct io_setting { */ static bool phase_sdram_init(void) { - return spl_phase() == PHASE_TPL || + return xpl_phase() == PHASE_TPL || (!IS_ENABLED(CONFIG_TPL) && !IS_ENABLED(CONFIG_ROCKCHIP_EXTERNAL_TPL) && !spl_in_proper()); diff --git a/drivers/spi/ich.c b/drivers/spi/ich.c index e48ca65fe72..2264ca83d66 100644 --- a/drivers/spi/ich.c +++ b/drivers/spi/ich.c @@ -779,7 +779,7 @@ static int ich_init_controller(struct udevice *dev, struct ich_spi_plat *plat, struct ich_spi_priv *ctlr) { - if (spl_phase() == PHASE_TPL) { + if (xpl_phase() == PHASE_TPL) { struct ich_spi_plat *plat = dev_get_plat(dev); int ret;
@@ -867,7 +867,7 @@ static int ich_spi_probe(struct udevice *dev) if (ret) return ret;
- if (spl_phase() == PHASE_TPL) { + if (xpl_phase() == PHASE_TPL) { /* Cache the BIOS to speed things up */ ret = ich_cache_bios_region(dev); if (ret) diff --git a/drivers/sysreset/sysreset-uclass.c b/drivers/sysreset/sysreset-uclass.c index d30b008bf9a..536ac727142 100644 --- a/drivers/sysreset/sysreset-uclass.c +++ b/drivers/sysreset/sysreset-uclass.c @@ -102,7 +102,7 @@ void sysreset_walk_halt(enum sysreset_t type) mdelay(100);
/* Still no reset? Give up */ - if (spl_phase() <= PHASE_SPL) + if (xpl_phase() <= PHASE_SPL) log_err("no sysreset\n"); else log_err("System reset not supported on this platform\n"); diff --git a/drivers/video/console_truetype.c b/drivers/video/console_truetype.c index c435162d3f9..17a29817664 100644 --- a/drivers/video/console_truetype.c +++ b/drivers/video/console_truetype.c @@ -802,7 +802,7 @@ static int truetype_entry_save(struct udevice *dev, struct abuf *buf) struct console_tt_store store; const uint size = sizeof(store);
- if (spl_phase() <= PHASE_SPL) + if (xpl_phase() <= PHASE_SPL) return -ENOSYS;
/* @@ -826,7 +826,7 @@ static int truetype_entry_restore(struct udevice *dev, struct abuf *buf) struct console_tt_priv *priv = dev_get_priv(dev); struct console_tt_store store;
- if (spl_phase() <= PHASE_SPL) + if (xpl_phase() <= PHASE_SPL) return -ENOSYS;
memcpy(&store, abuf_data(buf), sizeof(store)); @@ -853,7 +853,7 @@ static int truetype_set_cursor_visible(struct udevice *dev, bool visible, uint out, val; int ret;
- if (spl_phase() <= PHASE_SPL) + if (xpl_phase() <= PHASE_SPL) return -ENOSYS;
if (!visible) diff --git a/drivers/video/video-uclass.c b/drivers/video/video-uclass.c index 41bb7647fda..9823673f817 100644 --- a/drivers/video/video-uclass.c +++ b/drivers/video/video-uclass.c @@ -128,7 +128,7 @@ int video_reserve(ulong *addrp) struct udevice *dev; ulong size;
- if (IS_ENABLED(CONFIG_SPL_VIDEO_HANDOFF) && spl_phase() == PHASE_BOARD_F) + if (IS_ENABLED(CONFIG_SPL_VIDEO_HANDOFF) && xpl_phase() == PHASE_BOARD_F) return 0;
gd->video_top = *addrp; @@ -421,7 +421,7 @@ bool video_is_active(void) struct udevice *dev;
/* Assume video to be active if SPL passed video hand-off to U-boot */ - if (IS_ENABLED(CONFIG_SPL_VIDEO_HANDOFF) && spl_phase() > PHASE_SPL) + if (IS_ENABLED(CONFIG_SPL_VIDEO_HANDOFF) && xpl_phase() > PHASE_SPL) return true;
for (uclass_find_first_device(UCLASS_VIDEO, &dev); @@ -573,7 +573,7 @@ static int video_post_probe(struct udevice *dev) * NOTE: * This assumes that reserved video memory only uses a single framebuffer */ - if (spl_phase() == PHASE_SPL && CONFIG_IS_ENABLED(BLOBLIST)) { + if (xpl_phase() == PHASE_SPL && CONFIG_IS_ENABLED(BLOBLIST)) { struct video_handoff *ho;
ho = bloblist_add(BLOBLISTT_U_BOOT_VIDEO, sizeof(*ho), 0); diff --git a/include/spl.h b/include/spl.h index 3447a429e87..079a38433a2 100644 --- a/include/spl.h +++ b/include/spl.h @@ -74,7 +74,7 @@ enum xpl_phase_t { };
/** - * spl_phase() - Find out the phase of U-Boot + * xpl_phase() - Find out the phase of U-Boot * * This can be used to avoid #ifdef logic and use if() instead. * @@ -86,7 +86,7 @@ enum xpl_phase_t { * * but with this you can use: * - * if (spl_phase() == PHASE_TPL) { + * if (xpl_phase() == PHASE_TPL) { * ... * } * @@ -98,7 +98,7 @@ enum xpl_phase_t { * * but with this you can use: * - * if (spl_phase() == PHASE_SPL) { + * if (xpl_phase() == PHASE_SPL) { * ... * } * @@ -110,13 +110,13 @@ enum xpl_phase_t { * * but with this you can use: * - * if (spl_phase() == PHASE_BOARD_F) { + * if (xpl_phase() == PHASE_BOARD_F) { * ... * } * * Return: U-Boot phase */ -static inline enum xpl_phase_t spl_phase(void) +static inline enum xpl_phase_t xpl_phase(void) { #ifdef CONFIG_TPL_BUILD return PHASE_TPL; diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 4199379c872..cdc2edbd61e 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -608,7 +608,7 @@ int fdtdec_get_chosen_node(const void *blob, const char *name) static int fdtdec_prepare_fdt(const void *blob) { if (!blob || ((uintptr_t)blob & 3) || fdt_check_header(blob)) { - if (spl_phase() <= PHASE_SPL) { + if (xpl_phase() <= PHASE_SPL) { puts("Missing DTB\n"); } else { printf("No valid device tree binary found at %p\n", diff --git a/lib/lmb.c b/lib/lmb.c index 3ed570fb29b..380d92a6718 100644 --- a/lib/lmb.c +++ b/lib/lmb.c @@ -749,9 +749,9 @@ int lmb_init(void) lmb_add_memory();
/* Reserve the U-Boot image region once U-Boot has relocated */ - if (spl_phase() == PHASE_SPL) + if (xpl_phase() == PHASE_SPL) lmb_reserve_common_spl(); - else if (spl_phase() == PHASE_BOARD_R) + else if (xpl_phase() == PHASE_BOARD_R) lmb_reserve_common((void *)gd->fdt_blob);
return 0; diff --git a/lib/time.c b/lib/time.c index 872f73d521e..d88edafb196 100644 --- a/lib/time.c +++ b/lib/time.c @@ -100,7 +100,7 @@ uint64_t notrace get_ticks(void)
ret = timer_get_count(gd->timer, &count); if (ret) { - if (spl_phase() > PHASE_TPL) + if (xpl_phase() > PHASE_TPL) panic("Could not read count from timer (err %d)\n", ret); else