From: Peng Fan peng.fan@nxp.com
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code, set_wdog_reset function could be handled by imx_watchdog.c driver.
Signed-off-by: Peng Fan peng.fan@nxp.com --- arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi | 4 ++++ board/beacon/imx8mm/spl.c | 19 ------------------- 2 files changed, 4 insertions(+), 19 deletions(-)
diff --git a/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi b/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi index e33e10ac129..c94b4ffa4c3 100644 --- a/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi @@ -73,6 +73,10 @@ u-boot,dm-spl; };
+&pinctrl_wdog { + u-boot,dm-spl; +}; + &uart2 { u-boot,dm-spl; }; diff --git a/board/beacon/imx8mm/spl.c b/board/beacon/imx8mm/spl.c index f92b4c3ed0a..a93cc938784 100644 --- a/board/beacon/imx8mm/spl.c +++ b/board/beacon/imx8mm/spl.c @@ -59,23 +59,6 @@ int board_fit_config_name_match(const char *name) } #endif
-#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE) - -static iomux_v3_cfg_t const wdog_pads[] = { - IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), -}; - -int board_early_init_f(void) -{ - struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; - - imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); - - set_wdog_reset(wdog); - - return 0; -} - static int power_init_board(void) { struct udevice *dev; @@ -116,8 +99,6 @@ void board_init_f(ulong dummy)
init_uart_clk(1);
- board_early_init_f(); - timer_init();
/* Clear the BSS. */