The driver for SPI0 on Allwinner H6 SoCs did not use the correct define SUN50I_GPC_SPI0 for the pin function, but one for a different Allwinner SoC series.
Fix the conditionals to use the correct define for H6 SoCs. This matches the conditional logic in the SPL spi driver.
Tested by probing the spi-flash on a pine64_h64-model-b board with adapted device-tree (disable mmc2, enable spi0).
Signed-off-by: Daniel Wagenknecht dwagenk@mailbox.org ---
Adapted to use CONFIG_SUN50I_GEN_H6 as requested.
drivers/spi/spi-sunxi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-sunxi.c b/drivers/spi/spi-sunxi.c index bc2f544e86..6a8ee8d542 100644 --- a/drivers/spi/spi-sunxi.c +++ b/drivers/spi/spi-sunxi.c @@ -249,7 +249,8 @@ static int sun4i_spi_parse_pins(struct udevice *dev) if (pin < 0) break;
- if (IS_ENABLED(CONFIG_MACH_SUN50I)) + if (IS_ENABLED(CONFIG_MACH_SUN50I) || + IS_ENABLED(CONFIG_SUN50I_GEN_H6)) sunxi_gpio_set_cfgpin(pin, SUN50I_GPC_SPI0); else sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_SPI0);