In message 3F15CE75.7070906@tait.co.nz you wrote:
Is anyone aware of any problems with the I2C POST test - I've enabled it and it looks like it locks up the CPM with the busy flag in the command register remaining set all the time.
Works fine here, both with the hardware and the software version of the I2C driver:
... => log show <4>POST memory PASSED <4>POST spr PASSED <4>POST cache PASSED <4>POST watchdog <4>PASSED <4>POST i2c PASSED <4>POST cpu PASSED <4>POST ethernet PASSED <4>POST spi PASSED <4>POST usb PASSED <4>POST sysmon PASSED => diag run i2c => log show <4>POST memory PASSED <4>POST spr PASSED <4>POST cache PASSED <4>POST watchdog <4>PASSED <4>POST i2c PASSED <4>POST cpu PASSED <4>POST ethernet PASSED <4>POST spi PASSED <4>POST usb PASSED <4>POST sysmon PASSED <4>POST i2c PASSED =>
Does anyone know if this is (well) tested code or should I just ignore it and write my own...
Please do not ignore it, and do not write your own. If there are problems I'd rather see them fixed.
Best regards,
Wolfgang Denk