Hi Sinan,
Thanks for your Reply, I am using u-boot-2013.04 version. These are the following configuration which we are using: 1. SySclk -> 100Mhz 2. MPX Clk -> 400Mhz 3. Core Clk ->1200Mhz 4. LBC clk -> 25Mhz 5. LBC CS0 -> Flash1(128Mbyte s29gl01gs) 6. LBC CS1 -> Flash2(256Mbyte s70gl02gs)
I have attached booting and crash log file. But when I type bdinfo in there its display only current flash size. I hope this information will help to understand the problem.
On Thu, Mar 19, 2015 at 11:02 PM, Sinan Akman sinan@writeme.com wrote:
Hi Ashish
On 03/19/2015 08:12 AM, Ashish Khetan wrote:
Hi All, I have been facing a strange problem in my board which is MPC8641D based. In this board we have two nor spansion flashes connected to cs0 and cs1. U boot had detected both the flashes and when flinfo command is it shows both flash information but when we try to access another flash u-boot is crashing.
Flash part no is s29gl01gs which is CFI complaint.
Please provide some pointers where I should concentrate more to resolve this issue. As I have checked all the configuration in configuration file it seems to be fine. Any help will be really appreciated.
As a rule of thumb, you need to provide u-boot version that you are running. Ideally you should run the latest mainline u-boot and reproduce the problem if you like to get effective help from others.
So please reproduce the issue with the latest mainline u-boot, document the steps and provide some more info on your target hw.
Regards Sinan Akman