[U-Boot] [PATCH 1/3] spi: xilinx_spi: Fix to configure CPOL, CPHA mask

priv->mode is initialized when .set_speed triggers with mode value, so checking mode for configuring CPOL, CPHA using priv->mode is invalid hence use mode from .set_speed argument, and at the end priv->mode will initialized with mode.

This patch also replaces formatting string to use speed instead of mode in .set_speed ops.

Signed-off-by: Jagan Teki jteki@openedev.com --- drivers/spi/xilinx_spi.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c index 6c21acd..8ccc578 100644 --- a/drivers/spi/xilinx_spi.c +++ b/drivers/spi/xilinx_spi.c @@ -247,7 +247,7 @@ static int xilinx_spi_set_speed(struct udevice *bus, uint speed)

priv->freq = speed;

- debug("xilinx_spi_set_speed: regs=%p, mode=%d\n", priv->regs, + debug("xilinx_spi_set_speed: regs=%p, speed=%d\n", priv->regs, priv->freq);

return 0; @@ -260,13 +260,13 @@ static int xilinx_spi_set_mode(struct udevice *bus, uint mode) uint32_t spicr;

spicr = readl(&regs->spicr); - if (priv->mode & SPI_LSB_FIRST) + if (mode & SPI_LSB_FIRST) spicr |= SPICR_LSB_FIRST; - if (priv->mode & SPI_CPHA) + if (mode & SPI_CPHA) spicr |= SPICR_CPHA; - if (priv->mode & SPI_CPOL) + if (mode & SPI_CPOL) spicr |= SPICR_CPOL; - if (priv->mode & SPI_LOOP) + if (mode & SPI_LOOP) spicr |= SPICR_LOOP;

writel(spicr, &regs->spicr);