The dm_gpio_set_value() routine sets signal logical level, with GPIO_ACTIVE_LOW/HIGH value taken into account. Reset active value is 1 (asserted), while reset inactive value is 0 (de-asserted). Fix the reset toggle code to set the correct reset logic value.
Reported-by: Sven Auhagen sven.auhagen@voleatech.de Signed-off-by: Baruch Siach baruch@tkos.co.il --- drivers/pci/pcie_dw_mvebu.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/pcie_dw_mvebu.c b/drivers/pci/pcie_dw_mvebu.c index 8081005c27ee..95fb41966fd6 100644 --- a/drivers/pci/pcie_dw_mvebu.c +++ b/drivers/pci/pcie_dw_mvebu.c @@ -489,7 +489,9 @@ static int pcie_dw_mvebu_probe(struct udevice *dev) * using this GPIO. */ if (dm_gpio_is_valid(&reset_gpio)) { - dm_gpio_set_value(&reset_gpio, 1); + dm_gpio_set_value(&reset_gpio, 1); /* assert */ + mdelay(200); + dm_gpio_set_value(&reset_gpio, 0); /* de-assert */ mdelay(200); } #else