No need to configure indirect trigger address for every read/write.
Signed-off-by: Vikas Manocha vikas.manocha@st.com ---
Changes in v4: fix checkpatch CHECK message. Changes in v3: added commit message & removed extra bracket. Changes in v2: Rebased to master
drivers/spi/cadence_qspi_apb.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/drivers/spi/cadence_qspi_apb.c b/drivers/spi/cadence_qspi_apb.c index d053407..d377ad1 100644 --- a/drivers/spi/cadence_qspi_apb.c +++ b/drivers/spi/cadence_qspi_apb.c @@ -534,6 +534,8 @@ void cadence_qspi_apb_controller_init(struct cadence_spi_platdata *plat)
/* Indirect mode configurations */ writel((plat->sram_size/2), plat->regbase + CQSPI_REG_SRAMPARTITION); + writel((u32)plat->ahbbase & CQSPI_INDIRECTTRIGGER_ADDR_MASK, + plat->regbase + CQSPI_REG_INDIRECTTRIGGER);
/* Disable all interrupts */ writel(0, plat->regbase + CQSPI_REG_IRQMASK); @@ -693,10 +695,6 @@ int cadence_qspi_apb_indirect_read_setup(struct cadence_spi_platdata *plat, /* for normal read (only ramtron as of now) */ addr_bytes = cmdlen - 1;
- /* Setup the indirect trigger address */ - writel(((u32)plat->ahbbase & CQSPI_INDIRECTTRIGGER_ADDR_MASK), - plat->regbase + CQSPI_REG_INDIRECTTRIGGER); - /* Configure the opcode */ rd_reg = cmdbuf[0] << CQSPI_REG_RD_INSTR_OPCODE_LSB;
@@ -790,9 +788,6 @@ int cadence_qspi_apb_indirect_write_setup(struct cadence_spi_platdata *plat, cmdlen, (unsigned int)cmdbuf); return -EINVAL; } - /* Setup the indirect trigger address */ - writel(((u32)plat->ahbbase & CQSPI_INDIRECTTRIGGER_ADDR_MASK), - plat->regbase + CQSPI_REG_INDIRECTTRIGGER);
/* Configure the opcode */ reg = cmdbuf[0] << CQSPI_REG_WR_INSTR_OPCODE_LSB;