From: Keerthy j-keerthy@ti.com
dra76-evm uses lp8736 and tps65917 pmic for powering on various peripherals. Add data for these pmics and register for dra76-evm.
Reviewed-by: Tom Rini trini@konsulko.com Signed-off-by: Keerthy j-keerthy@ti.com Signed-off-by: Lokesh Vutla lokeshvutla@ti.com --- arch/arm/include/asm/arch-omap5/clock.h | 9 ++++++ arch/arm/include/asm/omap_common.h | 1 + arch/arm/mach-omap2/omap5/hw_data.c | 16 +++++++++++ board/ti/dra7xx/evm.c | 50 +++++++++++++++++++++++++++++++++ 4 files changed, 76 insertions(+)
diff --git a/arch/arm/include/asm/arch-omap5/clock.h b/arch/arm/include/asm/arch-omap5/clock.h index dbe340d23e..ee2e78b99b 100644 --- a/arch/arm/include/asm/arch-omap5/clock.h +++ b/arch/arm/include/asm/arch-omap5/clock.h @@ -340,6 +340,9 @@ /* Offset is 0.73V for LP873x */ #define LP873X_BUCK_BASE_VOLT_UV 730000
+/* Offset is 0.73V for LP87565 */ +#define LP87565_BUCK_BASE_VOLT_UV 730000 + /* TPS659038 */ #define TPS659038_I2C_SLAVE_ADDR 0x58 #define TPS659038_REG_ADDR_SMPS12 0x23 @@ -353,6 +356,7 @@ #define TPS65917_REG_ADDR_SMPS1 0x23 #define TPS65917_REG_ADDR_SMPS2 0x27 #define TPS65917_REG_ADDR_SMPS3 0x2F +#define TPS65917_REG_ADDR_SMPS4 0x33
/* LP873X */ #define LP873X_I2C_SLAVE_ADDR 0x60 @@ -360,6 +364,11 @@ #define LP873X_REG_ADDR_BUCK1 0x7 #define LP873X_REG_ADDR_LDO1 0xA
+/* LP87565 */ +#define LP87565_I2C_SLAVE_ADDR 0x61 +#define LP87565_REG_ADDR_BUCK01 0xA +#define LP87565_REG_ADDR_BUCK23 0xE + /* TPS */ #define TPS62361_I2C_SLAVE_ADDR 0x60 #define TPS62361_REG_ADDR_SET0 0x0 diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index e951b232d6..b34ad41325 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -607,6 +607,7 @@ extern struct omap_sys_ctrl_regs const dra7xx_ctrl;
extern struct pmic_data tps659038; extern struct pmic_data lp8733; +extern struct pmic_data lp87565;
void hw_data_init(void);
diff --git a/arch/arm/mach-omap2/omap5/hw_data.c b/arch/arm/mach-omap2/omap5/hw_data.c index 19a8d10cef..7aaf379357 100644 --- a/arch/arm/mach-omap2/omap5/hw_data.c +++ b/arch/arm/mach-omap2/omap5/hw_data.c @@ -306,6 +306,22 @@ struct pmic_data tps659038 = { .gpio_en = 0, };
+/* The LP87565*/ +struct pmic_data lp87565 = { + .base_offset = LP873X_BUCK_BASE_VOLT_UV, + .step = 5000, /* 5 mV represented in uV */ + /* + * Offset codes 0 - 0x13 Invalid. + * Offset codes 0x14 0x17 give 10mV steps + * Offset codes 0x17 through 0x9D give 5mV steps + * So let us start with our operating range from .73V + */ + .start_code = 0x17, + .i2c_slave_addr = 0x60, + .pmic_bus_init = gpi2c_init, + .pmic_write = palmas_i2c_write_u8, +}; + /* The LP8732 and LP8733 are software-compatible, use common struct */ struct pmic_data lp8733 = { .base_offset = LP873X_BUCK_BASE_VOLT_UV, diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index ee6d5251d5..8e79350111 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -357,6 +357,54 @@ struct vcores_data dra752_volts = { .iva.abb_tx_done_mask = OMAP_ABB_IVA_TXDONE_MASK, };
+struct vcores_data dra76x_volts = { + .mpu.value[OPP_NOM] = VDD_MPU_DRA7_NOM, + .mpu.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_MPU_NOM, + .mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .mpu.addr = LP87565_REG_ADDR_BUCK01, + .mpu.pmic = &lp87565, + .mpu.abb_tx_done_mask = OMAP_ABB_MPU_TXDONE_MASK, + + .eve.value[OPP_NOM] = VDD_EVE_DRA7_NOM, + .eve.value[OPP_OD] = VDD_EVE_DRA7_OD, + .eve.value[OPP_HIGH] = VDD_EVE_DRA7_HIGH, + .eve.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_DSPEVE_NOM, + .eve.efuse.reg[OPP_OD] = STD_FUSE_OPP_VMIN_DSPEVE_OD, + .eve.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_DSPEVE_HIGH, + .eve.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .eve.addr = TPS65917_REG_ADDR_SMPS1, + .eve.pmic = &tps659038, + .eve.abb_tx_done_mask = OMAP_ABB_EVE_TXDONE_MASK, + + .gpu.value[OPP_NOM] = VDD_GPU_DRA7_NOM, + .gpu.value[OPP_OD] = VDD_GPU_DRA7_OD, + .gpu.value[OPP_HIGH] = VDD_GPU_DRA7_HIGH, + .gpu.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_GPU_NOM, + .gpu.efuse.reg[OPP_OD] = STD_FUSE_OPP_VMIN_GPU_OD, + .gpu.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_GPU_HIGH, + .gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .gpu.addr = LP87565_REG_ADDR_BUCK23, + .gpu.pmic = &lp87565, + .gpu.abb_tx_done_mask = OMAP_ABB_GPU_TXDONE_MASK, + + .core.value[OPP_NOM] = VDD_CORE_DRA7_NOM, + .core.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_CORE_NOM, + .core.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .core.addr = TPS65917_REG_ADDR_SMPS3, + .core.pmic = &tps659038, + + .iva.value[OPP_NOM] = VDD_IVA_DRA7_NOM, + .iva.value[OPP_OD] = VDD_IVA_DRA7_OD, + .iva.value[OPP_HIGH] = VDD_IVA_DRA7_HIGH, + .iva.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_IVA_NOM, + .iva.efuse.reg[OPP_OD] = STD_FUSE_OPP_VMIN_IVA_OD, + .iva.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_IVA_HIGH, + .iva.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .iva.addr = TPS65917_REG_ADDR_SMPS4, + .iva.pmic = &tps659038, + .iva.abb_tx_done_mask = OMAP_ABB_IVA_TXDONE_MASK, +}; + struct vcores_data dra722_volts = { .mpu.value[OPP_NOM] = VDD_MPU_DRA7_NOM, .mpu.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_MPU_NOM, @@ -622,6 +670,8 @@ void vcores_init(void) *omap_vcores = &dra722_volts; } else if (board_is_dra71x_evm()) { *omap_vcores = &dra718_volts; + } else if (board_is_dra76x_evm()) { + *omap_vcores = &dra76x_volts; } else { /* If EEPROM is not populated */ if (is_dra72x())