Add support to handle USB3 PHYs present on AM57xx/DRA7xx SoCs. This is needed to move AM57xx to DM_USB.
Signed-off-by: Vignesh R vigneshr@ti.com --- drivers/phy/ti-pipe3-phy.c | 30 +++++++++++++++++++++++------- 1 file changed, 23 insertions(+), 7 deletions(-)
diff --git a/drivers/phy/ti-pipe3-phy.c b/drivers/phy/ti-pipe3-phy.c index babf2ffe393e..9fddd011f8f3 100644 --- a/drivers/phy/ti-pipe3-phy.c +++ b/drivers/phy/ti-pipe3-phy.c @@ -266,10 +266,13 @@ static int pipe3_exit(struct phy *phy) return -EBUSY; }
- val = readl(pipe3->pll_reset_reg); - writel(val | SATA_PLL_SOFT_RESET, pipe3->pll_reset_reg); - mdelay(1); - writel(val & ~SATA_PLL_SOFT_RESET, pipe3->pll_reset_reg); + if (pipe3->pll_reset_reg) { + val = readl(pipe3->pll_reset_reg); + writel(val | SATA_PLL_SOFT_RESET, pipe3->pll_reset_reg); + mdelay(1); + writel(val & ~SATA_PLL_SOFT_RESET, pipe3->pll_reset_reg); + } + return 0; }
@@ -332,9 +335,11 @@ static int pipe3_phy_probe(struct udevice *dev) if (!pipe3->power_reg) return -EINVAL;
- pipe3->pll_reset_reg = get_reg(dev, "syscon-pllreset"); - if (!pipe3->pll_reset_reg) - return -EINVAL; + if (device_is_compatible(dev, "ti,phy-pipe3-sata")) { + pipe3->pll_reset_reg = get_reg(dev, "syscon-pllreset"); + if (!pipe3->pll_reset_reg) + return -EINVAL; + }
pipe3->dpll_map = (struct pipe3_dpll_map *)dev_get_driver_data(dev);
@@ -351,8 +356,19 @@ static struct pipe3_dpll_map dpll_map_sata[] = { { }, /* Terminator */ };
+static struct pipe3_dpll_map dpll_map_usb[] = { + {12000000, {1250, 5, 4, 20, 0} }, /* 12 MHz */ + {16800000, {3125, 20, 4, 20, 0} }, /* 16.8 MHz */ + {19200000, {1172, 8, 4, 20, 65537} }, /* 19.2 MHz */ + {20000000, {1000, 7, 4, 10, 0} }, /* 20 MHz */ + {26000000, {1250, 12, 4, 20, 0} }, /* 26 MHz */ + {38400000, {3125, 47, 4, 20, 92843} }, /* 38.4 MHz */ + { }, /* Terminator */ +}; + static const struct udevice_id pipe3_phy_ids[] = { { .compatible = "ti,phy-pipe3-sata", .data = (ulong)&dpll_map_sata }, + { .compatible = "ti,omap-usb3", .data = (ulong)&dpll_map_usb}, { } };