From: Icenowy Zheng icenowy@aosc.xyz
Basic U-Boot support is now present for V3s.
Some memory addresses are changed specially for V3s, as the original address map cannot fit into a so small DRAM.
As the DRAM controller code needs a big refactor, the SPL support is disabled in this version.
Signed-off-by: Icenowy Zheng icenowy@aosc.io Acked-by: Maxime Ripard maxime.ripard@free-electrons.com Reviewed-by: Jagan Teki jagan@openedev.com --- Changes in v5: - Fixed the regression that A64 cannot build after applying this patch. (Added BOOTM_SIZE for 64-bit environment) - Rebased on current sunxi/next.
Changes in v4: - Enable PSCI for the SoC. (For virtualization support, although it seems to be a joke to use virtualization on systems with 64MiB DRAM) - Add Maxime's ACK and Jagan's Reviewed-By.
Changes in v3: - Remove some dead codes.
arch/arm/include/asm/arch-sunxi/gpio.h | 1 + arch/arm/mach-sunxi/board.c | 4 ++++ arch/arm/mach-sunxi/cpu_info.c | 2 ++ board/sunxi/Kconfig | 15 +++++++++++++-- include/configs/sun8i.h | 2 ++ include/configs/sunxi-common.h | 29 +++++++++++++++++++++++++++-- 6 files changed, 49 insertions(+), 4 deletions(-)
diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index 85a4ec3b0e..24f85206c8 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -161,6 +161,7 @@ enum sunxi_gpio_number { #define SUN8I_GPB_UART2 2 #define SUN8I_A33_GPB_UART0 3 #define SUN8I_A83T_GPB_UART0 2 +#define SUN8I_V3S_GPB_UART0 3 #define SUN50I_GPB_UART0 4
#define SUNXI_GPC_NAND 2 diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c index 5e03d03943..4a8b52389e 100644 --- a/arch/arm/mach-sunxi/board.c +++ b/arch/arm/mach-sunxi/board.c @@ -110,6 +110,10 @@ static int gpio_init(void) sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN8I_A83T_GPB_UART0); sunxi_gpio_set_cfgpin(SUNXI_GPB(10), SUN8I_A83T_GPB_UART0); sunxi_gpio_set_pull(SUNXI_GPB(10), SUNXI_GPIO_PULL_UP); +#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_V3S) + sunxi_gpio_set_cfgpin(SUNXI_GPB(8), SUN8I_V3S_GPB_UART0); + sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN8I_V3S_GPB_UART0); + sunxi_gpio_set_pull(SUNXI_GPB(9), SUNXI_GPIO_PULL_UP); #elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN9I) sunxi_gpio_set_cfgpin(SUNXI_GPH(12), SUN9I_GPH_UART0); sunxi_gpio_set_cfgpin(SUNXI_GPH(13), SUN9I_GPH_UART0); diff --git a/arch/arm/mach-sunxi/cpu_info.c b/arch/arm/mach-sunxi/cpu_info.c index 85633ccec2..46a51c6659 100644 --- a/arch/arm/mach-sunxi/cpu_info.c +++ b/arch/arm/mach-sunxi/cpu_info.c @@ -87,6 +87,8 @@ int print_cpuinfo(void) printf("CPU: Allwinner A83T (SUN8I %04x)\n", sunxi_get_sram_id()); #elif defined CONFIG_MACH_SUN8I_H3 printf("CPU: Allwinner H3 (SUN8I %04x)\n", sunxi_get_sram_id()); +#elif defined CONFIG_MACH_SUN8I_V3S + printf("CPU: Allwinner V3s (SUN8I %04x)\n", sunxi_get_sram_id()); #elif defined CONFIG_MACH_SUN9I puts("CPU: Allwinner A80 (SUN9I)\n"); #elif defined CONFIG_MACH_SUN50I diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 32b2e3e2c0..5670ce42f3 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -132,6 +132,15 @@ config MACH_SUN8I_H3 select MACH_SUNXI_H3_H5 select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
+config MACH_SUN8I_V3S + bool "sun8i (Allwinner V3s)" + select CPU_V7 + select CPU_V7_HAS_NONSEC + select CPU_V7_HAS_VIRT + select ARCH_SUPPORT_PSCI + select SUNXI_GEN_SUN6I + select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT + config MACH_SUN9I bool "sun9i (Allwinner A80)" select CPU_V7 @@ -157,7 +166,8 @@ endchoice # The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33" config MACH_SUN8I bool - default y if MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUNXI_H3_H5 || MACH_SUN8I_A83T + default y if MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUNXI_H3_H5 || \ + MACH_SUN8I_A83T || MACH_SUN8I_V3S
config RESERVE_ALLWINNER_BOOT0_HEADER bool "reserve space for Allwinner boot0 header" @@ -517,7 +527,8 @@ config AXP_GPIO
config VIDEO bool "Enable graphical uboot console on HDMI, LCD or VGA" - depends on !MACH_SUN8I_A83T && !MACH_SUNXI_H3_H5 && !MACH_SUN9I && !MACH_SUN50I + depends on !MACH_SUN8I_A83T && !MACH_SUN8I_V3S && \ + !MACH_SUNXI_H3_H5 && !MACH_SUN9I && !MACH_SUN50I default y ---help--- Say Y here to add support for using a cfb console on the HDMI, LCD diff --git a/include/configs/sun8i.h b/include/configs/sun8i.h index a4c3fb69e4..6ac42acaea 100644 --- a/include/configs/sun8i.h +++ b/include/configs/sun8i.h @@ -21,6 +21,8 @@ #define CONFIG_SUNXI_USB_PHYS 4 #elif defined CONFIG_MACH_SUN8I_A83T #define CONFIG_SUNXI_USB_PHYS 3 +#elif defined CONFIG_MACH_SUN8I_V3S + #define CONFIG_SUNXI_USB_PHYS 1 #else #define CONFIG_SUNXI_USB_PHYS 2 #endif diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 67e1465b69..6e4acbf617 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -76,7 +76,12 @@ #define SDRAM_OFFSET(x) 0x4##x #define CONFIG_SYS_SDRAM_BASE 0x40000000 #define CONFIG_SYS_LOAD_ADDR 0x42000000 /* default load address */ +/* V3s do not have enough memory to place code at 0x4a000000 */ +#ifndef CONFIG_MACH_SUN8I_V3S #define CONFIG_SYS_TEXT_BASE 0x4a000000 +#else +#define CONFIG_SYS_TEXT_BASE 0x42e00000 +#endif /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here * since it needs to fit in with the other values. By also #defining it * we get warnings if the Kconfig value mismatches. */ @@ -153,8 +158,13 @@ #define CONFIG_ENV_SIZE (128 << 10) #endif
+#ifndef CONFIG_MACH_SUN8I_V3S /* 64MB of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (64 << 20)) +#else +/* 2MB of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (2 << 20)) +#endif
/* * Miscellaneous configurable options @@ -353,6 +363,7 @@ extern int soft_i2c_gpio_scl; * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd. * Align the initrd to a 2MB page. */ +#define BOOTM_SIZE __stringify(0xa000000) #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000)) #define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000)) #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000)) @@ -365,16 +376,30 @@ extern int soft_i2c_gpio_scl; * 32M uncompressed kernel, 16M compressed kernel, 1M fdt, * 1M script, 1M pxe and the ramdisk at the end. */ - +#ifndef CONFIG_MACH_SUN8I_V3S +#define BOOTM_SIZE __stringify(0xa000000) #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000)) #define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000)) #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000)) #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000)) #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000)) +#else +/* + * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc. + * 16M uncompressed kernel, 8M compressed kernel, 1M fdt, + * 1M script, 1M pxe and the ramdisk at the end. + */ +#define BOOTM_SIZE __stringify(0x2e00000) +#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(1000000)) +#define FDT_ADDR_R __stringify(SDRAM_OFFSET(1800000)) +#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(1900000)) +#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000)) +#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1B00000)) +#endif #endif
#define MEM_LAYOUT_ENV_SETTINGS \ - "bootm_size=0xa000000\0" \ + "bootm_size=" BOOTM_SIZE "\0" \ "kernel_addr_r=" KERNEL_ADDR_R "\0" \ "fdt_addr_r=" FDT_ADDR_R "\0" \ "scriptaddr=" SCRIPT_ADDR_R "\0" \