From: prafulla_wadaskar prafulla@marvell.com
This is Marvell's 88F6281_A0 based custom board developed for wireless access point product
This patch is tested for- 1. Boot from DRAM/SPI flash/NFS 2. File transfer using tftp and loadb 3. SPI flash read/write/erase 4. Booting Linux kernel and RFS from SPI flash
Reviewed-by: Ronen Shitrit rshitrit@marvell.com Signed-off-by: Prafulla Wadaskar prafulla@marvell.com --- Change log v2: updated as per first review comments debug_prints updated to debug
v3: updaed as per review comments for v2 added mv88f6281gtw_ge.h file removed BITxx macros
v4: updated as per review comments for v3 arch_misc_init support is added and used from kirkwood
v5: updated as per review comments for v4 CONFIG_MACH_MV88F6281GTW_GE added more comments added and serial configuration removed from mv88f6281gtw_ge.c
MAKEALL | 1 + Makefile | 3 + board/Marvell/mv88f6281gtw_ge/Makefile | 51 +++++++ board/Marvell/mv88f6281gtw_ge/config.mk | 25 +++ board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 89 +++++++++++ board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.h | 51 +++++++ board/Marvell/mv88f6281gtw_ge/u-boot.lds | 53 +++++++ include/configs/mv88f6281gtw_ge.h | 180 +++++++++++++++++++++++ 8 files changed, 453 insertions(+), 0 deletions(-) create mode 100644 board/Marvell/mv88f6281gtw_ge/Makefile create mode 100644 board/Marvell/mv88f6281gtw_ge/config.mk create mode 100644 board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c create mode 100644 board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.h create mode 100644 board/Marvell/mv88f6281gtw_ge/u-boot.lds create mode 100644 include/configs/mv88f6281gtw_ge.h
diff --git a/MAKEALL b/MAKEALL index f13c81a..a7545c9 100755 --- a/MAKEALL +++ b/MAKEALL @@ -504,6 +504,7 @@ LIST_ARM9=" \ cp946es \ cp966 \ lpd7a400 \ + mv88f6281gtw_ge \ mx1ads \ mx1fs2 \ netstar \ diff --git a/Makefile b/Makefile index 1b43832..fdc78bf 100644 --- a/Makefile +++ b/Makefile @@ -2795,6 +2795,9 @@ lpd7a400_config \ lpd7a404_config: unconfig @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
+mv88f6281gtw_ge_config: unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood + mx1ads_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx
diff --git a/board/Marvell/mv88f6281gtw_ge/Makefile b/board/Marvell/mv88f6281gtw_ge/Makefile new file mode 100644 index 0000000..8c49a3e --- /dev/null +++ b/board/Marvell/mv88f6281gtw_ge/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# Prafulla Wadaskar prafulla@marvell.com +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := mv88f6281gtw_ge.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/Marvell/mv88f6281gtw_ge/config.mk b/board/Marvell/mv88f6281gtw_ge/config.mk new file mode 100644 index 0000000..fb29a1b --- /dev/null +++ b/board/Marvell/mv88f6281gtw_ge/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# Prafulla Wadaskar prafulla@marvell.com +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# + +TEXT_BASE = 0x00600000 diff --git a/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c b/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c new file mode 100644 index 0000000..7dc097b --- /dev/null +++ b/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c @@ -0,0 +1,89 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Prafulla Wadaskar prafulla@marvell.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <common.h> +#include <../drivers/net/phy/mv88e61xx.h> +#include <netdev.h> +#include "mv88f6281gtw_ge.h" + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + /* + * default gpio configuration + * There are maximum 64 gpios controlled through 2 sets of registers + * the below configuration configures mainly initial LED status + */ + kw_config_gpio(MV88F6281GTW_GE_OE_VAL_LOW, + MV88F6281GTW_GE_OE_VAL_HIGH, + MV88F6281GTW_GE_OE_LOW, MV88F6281GTW_GE_OE_HIGH); + + /* Multi-Purpose Pins Functionality configuration */ + kw_config_mpp(MV88F6281GTW_GE_MPP0_7, + MV88F6281GTW_GE_MPP8_15, + MV88F6281GTW_GE_MPP16_23, + MV88F6281GTW_GE_MPP24_31, + MV88F6281GTW_GE_MPP32_39, + MV88F6281GTW_GE_MPP40_47, MV88F6281GTW_GE_MPP48_55); + + /* + * arch number of board + */ + gd->bd->bi_arch_number = MACH_TYPE_MV88F6281GTW_GE; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100; + + return 0; +} + +int dram_init(void) +{ + int i; + + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { + gd->bd->bi_dram[i].start = kw_sdram_bar(i); + gd->bd->bi_dram[i].size = kw_sdram_bs(i); + } + return 0; +} + +#ifdef CONFIG_MV88E61XX_SWITCH +void reset_phy(void) +{ + /* configure and initialize switch */ + struct mv88e61xx_config swcfg = { + .name = "egiga0", + .vlancfg = MV88E61XX_VLANCFG_ROUTER, + .rgmii_delay = MV88E61XX_RGMII_DELAY_EN, + .portstate = MV88E61XX_PORTSTT_FORWARDING, + .cpuport = 5, + .ports_enabled = (PORT(0) | PORT(1) | PORT(2) + | PORT(3) | PORT(4) | PORT(5)) + }; + + mv88e61xx_switch_initialize(&swcfg); +} +#endif /* CONFIG_MV88E61XX_SWITCH */ diff --git a/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.h b/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.h new file mode 100644 index 0000000..51ceef5 --- /dev/null +++ b/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.h @@ -0,0 +1,51 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Prafulla Wadaskar prafulla@marvell.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef __MV88F6281GTW_GE_H +#define __MV88F6281GTW_GE_H + +#define MV88F6281GTW_GE_OE_LOW (~((1 << 7) | (1 << 20) \ + |(1 << 21))) /*enable GLED,RLED */ +#define MV88F6281GTW_GE_OE_HIGH (~((1 << 4)|(1 << 6)|(1 << 7)|(1 << 12) \ + |(1 << 13)|(1 << 16)|(1 << 17))) +#define MV88F6281GTW_GE_OE_VAL_LOW (1 << 20) /*make GLED on */ +#define MV88F6281GTW_GE_OE_VAL_HIGH ((1 << 6)|(1 << 13)|(1 << 16)|(1 << 17)) + +/* + * Default values for MPP registers + * + * There are maximum 64 Multi-Pourpose Pins on Kirkwood + * Each MPP functionality can be configuration by a 4bit value + * of MPP control reg, the value and associated functionality is SoC + * varient dependent + */ +#define MV88F6281GTW_GE_MPP0_7 0x01112222 +#define MV88F6281GTW_GE_MPP8_15 0x11103311 +#define MV88F6281GTW_GE_MPP16_23 0x00001111 +#define MV88F6281GTW_GE_MPP24_31 0x22222222 +#define MV88F6281GTW_GE_MPP32_39 0x40440222 +#define MV88F6281GTW_GE_MPP40_47 0x00004444 +#define MV88F6281GTW_GE_MPP48_55 0x00000000 + +#endif /* __MV88F6281GTW_GE_H */ diff --git a/board/Marvell/mv88f6281gtw_ge/u-boot.lds b/board/Marvell/mv88f6281gtw_ge/u-boot.lds new file mode 100644 index 0000000..9695f3f --- /dev/null +++ b/board/Marvell/mv88f6281gtw_ge/u-boot.lds @@ -0,0 +1,53 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Prafulla Wadaskar prafulla@marvell.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = _start; + . = ALIGN(4); + .text : + { + cpu/arm926ejs/start.o (.text) + *(.text) + } + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata))) } + . = ALIGN(4); + .data : { *(.data) } + . = ALIGN(4); + .got : { *(.got) } + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss (NOLOAD) : { *(.bss) . = ALIGN(4); } + _end = .; +} + diff --git a/include/configs/mv88f6281gtw_ge.h b/include/configs/mv88f6281gtw_ge.h new file mode 100644 index 0000000..6ec59f7 --- /dev/null +++ b/include/configs/mv88f6281gtw_ge.h @@ -0,0 +1,180 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Prafulla Wadaskar prafulla@marvell.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef _CONFIG_MV88F6281GTW_GE_H +#define _CONFIG_MV88F6281GTW_GE_H + +/* + * Version number information + */ +#define CONFIG_IDENT_STRING "\nMarvell-MV88F6281GTW_GE-A0" + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_MARVELL 1 +#define CONFIG_ARM926EJS 1 /* Basic Architecture */ +#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ +#define CONFIG_KIRKWOOD 1 /* SOC Family Name */ +#define CONFIG_KW88F6281 1 /* SOC Name */ +#define CONFIG_MACH_MV88F6281GTW_GE /* Machine type */ + +#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */ +#define CONFIG_ARCH_LOWLEVEL_INIT /* enable arch_lowlevel_init */ +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ +#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ +#define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 for kernel */ +#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ + +/* + * CLKs configurations + */ +#define CONFIG_SYS_HZ 1000 + +/* + * Serial Port configuration + * The following definitions let you select what serial you want to use + * for your console driver. + */ +#define CONFIG_KIRKWOOD_SERIAL /* enable kirkwood serial driver */ +#define CONFIG_CONS_INDEX 0 /*Console on UART0 */ + +#define CONFIG_BAUDRATE 115200 /* console baudrate */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ + 115200,230400, 460800, 921600 } +/* auto boot */ +#define CONFIG_BOOTDELAY 3 /* default enable autoboot */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_BOOTMAPSZ (8 << 20) /* Initial Memmap for Linux */ +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_INITRD_TAG 1 /* enable INITRD tag */ +#define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */ + +#define CONFIG_SYS_PROMPT "Marvell>> " /* Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + +sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */ +/* + * Commands configuration + */ +#define CONFIG_CMD_ENV +#define CONFIG_CMD_RUN +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_NET +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_AUTOSCRIPT +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_SAVEENV +#define CONFIG_CMD_SF + +/* + * Flash configuration + */ +#ifdef CONFIG_CMD_SF +#define CONFIG_SYS_NO_FLASH 1 /* Declare no NOR flash */ +#define CONFIG_SPI_FLASH 1 +#define CONFIG_HARD_SPI 1 +#define CONFIG_KIRKWOOD_SPI 1 +#define CONFIG_SPI_FLASH_MACRONIX 1 +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 50000000 /*50Mhz */ +#endif + +/* + * Environment variables configurations + */ +#ifdef CONFIG_SPI_FLASH +#define CONFIG_ENV_IS_IN_SPI_FLASH 1 +#define CONFIG_ENV_SIZE 0x10000 /* spi flash block (64k) */ +#define CONFIG_ENV_SECT_SIZE 0x10000 /* _64K */ +#else +#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ +#define CONFIG_ENV_SIZE 0x20000 /* default 128k */ +#endif +#define CONFIG_ENV_ADDR 0x20000 +#define CONFIG_ENV_OFFSET 0x20000 /* env starts here */ + +/* + * Default environment variables + */ +#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; setenv bootargs " \ + "${x_bootargs} ${x_bootargs_root}; bootm 0x6400000;" + +#define CONFIG_MTDPARTS "spi0.0:512k(uboot),512k@512k(psm), " \ + "2m@1m(kernel),13m@3m(rootfs)\0" + +#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console=ttyS0,115200 " \ + "mtdparts="CONFIG_MTDPARTS \ + "x_bootcmd_kernel=cp.b 0xf8100000 0x6400000 0x200000\0" \ + "x_bootargs_root=root=/dev/mtdblock3 ro rootfstype=squashfs\0" + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4M */ +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +/* + * Other required minimal configurations + */ +#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */ +#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ +#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ +#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ +#define CONFIG_NR_DRAM_BANKS 4 +#define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */ +#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ +#define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */ +#define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */ +#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ + +/* + * Ethernet Driver configuration + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_NETCONSOLE /* include NetConsole support */ +#define CONFIG_NET_MULTI /* specify more that one ports available */ +#define CONFIG_MII /* expose smi ove miiphy interface */ +#define CONFIG_KIRKWOOD_EGIGA /* Enable kirkwood Gbe Controller Driver */ +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ +#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,0} /* enable port 0 only */ +#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ +#endif /* CONFIG_CMD_NET */ + +/* + * Marvell 88Exxxx Switch configurations + */ +#define CONFIG_RESET_PHY_R /* use reset_phy() to init phy/swtich */ +#define CONFIG_MV88E61XX_SWITCH /* Enable mv88e61xx switch driver */ + +#endif /* _CONFIG_MV88F6281GTW_GE_H */