When the "Detected RDIMM [...]" message was added, it broke the pretty-printing of the DRAM information during boot.
It used to look like this: DRAM: 2 GiB (DDR2, 64-bit, CL=4, ECC on) DDR Chip-Select Interleaving Mode: CS0+CS1
Right now, it looks like this: DRAM: Detected RDIMM VL493T5663D-E6M 2 GiB (DDR2, 64-bit, CL=4, ECC on) DDR Chip-Select Interleaving Mode: CS0+CS1
After this patch, it is: DRAM: Detected RDIMM VL493T5663D-E6M 2 GiB (DDR2, 64-bit, CL=4, ECC on) DDR Chip-Select Interleaving Mode: CS0+CS1
Signed-off-by: Kyle Moffett Kyle.D.Moffett@boeing.com Cc: Wolfgang Denk wd@denx.de Cc: Kim Phillips kim.phillips@freescale.com Cc: Andy Fleming afleming@gmail.com Cc: Kumar Gala kumar.gala@freescale.com --- .../cpu/mpc8xxx/ddr/lc_common_dimm_params.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c index 20c7db0..3f9104c 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c @@ -209,11 +209,11 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, if (dimm_params[i].n_ranks) { if (dimm_params[i].registered_dimm) { temp1 = 1; - printf("Detected RDIMM %s\n", + printf("Detected RDIMM %s\n ", dimm_params[i].mpart); } else { temp2 = 1; - printf("Detected UDIMM %s\n", + printf("Detected UDIMM %s\n ", dimm_params[i].mpart); } }