From: Jan Kiszka jan.kiszka@siemens.com
This is enabled by default, thus should be described as well.
Signed-off-by: Jan Kiszka jan.kiszka@siemens.com --- doc/board/siemens/iot2050.rst | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/doc/board/siemens/iot2050.rst b/doc/board/siemens/iot2050.rst index cb49a0e36bf..efe94a448a9 100644 --- a/doc/board/siemens/iot2050.rst +++ b/doc/board/siemens/iot2050.rst @@ -27,6 +27,10 @@ The following binaries from that source need to be present in the build folder: - seboot_pg1.bin - seboot_pg2.bin
+When using the watchdog, a related firmware for the R5 core(s) is needed, e.g. +https://github.com/siemens/k3-rti-wdt. The name and location of the image is +configured via CONFIG_WDT_K3_RTI_FW_FILE. + For building an image containing the OTP key provisioning data, below binary needs to be present in the build folder: