Re: [PATCH v2 2/9] cmd: boot: implement PMIC based poweroff

24 липня 2023 р. 05:28:24 GMT+03:00, Simon Glass sjg@chromium.org написав(-ла):

Hi Svyatoslav,

On Sun, 23 Jul 2023 at 03:00, Svyatoslav Ryhel clamor95@gmail.com wrote:

...

нд, 23 лип. 2023 р. о 06:48 Simon Glass sjg@chromium.org пише:

...

Hi Svyatoslav,

On Thu, 20 Jul 2023 at 02:48, Svyatoslav Ryhel clamor95@gmail.com wrote:

...

Use new PMIC ops to perform device poweroff.

Signed-off-by: Svyatoslav Ryhel clamor95@gmail.com

cmd/Kconfig | 6 ++++++ cmd/boot.c | 40 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 46 insertions(+)

diff --git a/cmd/Kconfig b/cmd/Kconfig index ecfd575237..47654297f8 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -1439,6 +1439,12 @@ config CMD_POWEROFF help Poweroff/Shutdown the system

+config CMD_PMIC_POWEROFF

•   bool "PMIC poweroff"
  

•   select CMD_POWEROFF
  

•   help
  

•     Shutdown the system using PMIC poweroff sequence.
  

config CMD_READ bool "read - Read binary data from a partition" help diff --git a/cmd/boot.c b/cmd/boot.c index 14839c1ced..4270034194 100644 --- a/cmd/boot.c +++ b/cmd/boot.c @@ -9,7 +9,13 @@ */ #include <common.h> #include <command.h> +#include <dm.h> +#include <log.h> #include <net.h> +#include <dm/device-internal.h> +#include <dm/uclass-internal.h> +#include <power/pmic.h> +#include <linux/delay.h>

#ifdef CONFIG_CMD_GO

@@ -64,6 +70,40 @@ U_BOOT_CMD( );

#ifdef CONFIG_CMD_POWEROFF +#ifdef CONFIG_CMD_PMIC_POWEROFF +int do_poweroff(struct cmd_tbl *cmdtp, int flag,

•           int argc, char *const argv[])
  

+{

•   struct uc_pmic_priv *pmic_priv;
  

•   struct udevice *dev;
  

•   int ret;
  

•   for (uclass_find_first_device(UCLASS_PMIC, &dev);
  

•        dev;
  

•        uclass_find_next_device(&dev)) {
  

•           if (dev && !device_active(dev)) {
  

•                   ret = device_probe(dev);
  

•                   if (ret)
  

•                           return ret;
  

•           }
  

•           /* value we need to check is set after probe */
  

•           pmic_priv = dev_get_uclass_priv(dev);
  

•           if (pmic_priv->sys_pow_ctrl) {
  

•                   ret = pmic_poweroff(dev);
  

•                   /* wait some time and then print error */
  

•                   mdelay(5000);
  

•                   log_err("Failed to power off!!!\n");
  

•                   return ret;
  

•           }
  

•   }
  

•   /* no device should reach here */
  

•   return 1;
  

+} +#endif

U_BOOT_CMD( poweroff, 1, 0, do_poweroff, "Perform POWEROFF of the device", -- 2.39.2

How does this relate to sysreset_walk(SYSRESET_POWER_OFF) and do_poweroff() in cmd/boot.c?

Yes, it seems that I have misunderstood you, but non the less, you say that I have to implement a new separate pmic subdriver just to support poweroff?

Well it sounds like a lot, but it is not that hard. We try to model devices by their functionality, which maps to a uclass, so when we have a multi-function device we tend to model that with children, each with an appropriate uclass.

Alright, fair. I have prepared and tested sysreset for all PMICs I have sent and for Tegra in general. Unfortunately, they cannot be sent before existing patches are accepted and merged.

Regards, Simon